Request Quote
(Ships tomorrow)
MMZ2012S121AT000 Equivalent & Substitute Parts
Part Overview
The MMZ2012S121AT000 is a 120 Ohm ferrite bead signal line filter in 0805 (2012 Metric) surface mount package manufactured by TDK Corporation. This component operates at 100 MHz impedance with 800mA current rating and 150mOhm maximum DC resistance across an operating temperature range of -55°C to 125°C. The part carries Last Time Buy status, making identification of equivalent and substitute parts essential for ongoing design support and procurement planning.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Impedance @ Frequency | 120 Ohms @ 100 MHz |
| Package / Case | 0805 (2012 Metric) |
| Current Rating (Max) | 800mA |
| DC Resistance (DCR) (Max) | 150mOhm |
| Operating Temperature | -55°C ~ 125°C |
| Filter Type | Signal Line |
| Number of Lines | 1 |
| Mounting Type | Surface Mount |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility for the MMZ2012S121AT000 is determined by the following critical parameters:
- Impedance @ Frequency: Must be 120 Ohms @ 100 MHz
- Package / Case: Must be 0805 (2012 Metric) for mechanical and electrical compatibility
- Current Rating (Max): Must support minimum 800mA
- DC Resistance (DCR) (Max): Must not exceed 150mOhm
- Operating Temperature Range: Must cover -55°C ~ 125°C
- Filter Type: Signal Line designation
- Number of Lines: Single line configuration
- Mounting Type: Surface Mount
Substitute parts are grouped into two categories: parametric equivalents that match all critical specifications, and direct equivalents from alternative manufacturers that maintain functional compatibility within the specified electrical and mechanical constraints.
Parameter Comparison
| Manufacturer Part Number | Manufacturer | Impedance @ 100 MHz | Package | Current Rating (Max) | DCR (Max) | Operating Temp | Product Status | Packaging Type |
|---|---|---|---|---|---|---|---|---|
| MMZ2012S121AT000 | TDK Corporation | 120 Ohms | 0805 (2012 Metric) | 800mA | 150mOhm | -55°C ~ 125°C | Last Time Buy | Cut Tape (CT) |
| MMZ1608S121ATA00 | TDK Corporation | 120 Ohms | 0603 (1608 Metric) | 500mA | 200mOhm | -55°C ~ 125°C | Active | Tape & Reel (TR) |
| MMZ2012R121AT000 | TDK Corporation | 120 Ohms | 0805 (2012 Metric) | 800mA | 120mOhm | -55°C ~ 125°C | Last Time Buy | Cut Tape (CT) |
| MMZ2012Y121BT000 | TDK Corporation | 120 Ohms | 0805 (2012 Metric) | 800mA | 120mOhm | -55°C ~ 125°C | Last Time Buy | Cut Tape (CT) |
| MH2029-121Y | Bourns Inc. | 120 Ohms | 0805 (2012 Metric) | 2A | 100mOhm | -55°C ~ 125°C | Active | Tape & Reel (TR) |
| MFBW1V2012-121-R | Eaton - Electronics Division | 120 Ohms | 0805 (2012 Metric) | 2A | 100mOhm | -40°C ~ 85°C | Active | Tape & Reel (TR) |
| ACML-0805-121-T | Abracon LLC | 120 Ohms | 0805 (2012 Metric) | 800mA | 150mOhm | -55°C ~ 125°C | Active | Tape & Reel (TR) |
| BBGK00201209121Y00 | Pulse Electronics | 120 Ohms | 0805 (2012 Metric) | 800mA | 150mOhm | -55°C ~ 125°C | Active | Tape & Reel (TR) |
| BLM21AG121SN1D | Murata Electronics | 120 Ohms | 0805 (2012 Metric) | 800mA | 100mOhm | -55°C ~ 125°C | Active | Cut Tape (CT) & Digi-Reel® |
| FB201209T-121Y-S-1 | Cal-Chip Electronics, Inc. | 120 Ohms | 0805 (2012 Metric) | 800mA | 150mOhm | -55°C ~ 125°C | Active | Tape & Reel (TR) |
| WLBD2012K2U121TP | Walsin Technology Corporation | 120 Ohms | 0805 (2012 Metric) | 800mA | 150mOhm | -55°C ~ 125°C | Active | Tape & Reel (TR) |
Engineering Selection Recommendations
Direct Parametric Equivalents (Identical Specifications)
MMZ2012R121AT000 and MMZ2012Y121BT000 from TDK Corporation are direct parametric equivalents to MMZ2012S121AT000. Both maintain identical impedance, package, current rating, and operating temperature specifications. MMZ2012Y121BT000 offers higher inventory availability (81,864 units) compared to MMZ2012R121AT000 (17,300 units), while both carry Last Time Buy status. These parts are suitable for direct substitution without circuit redesign.
Active Status Alternatives (Recommended for New Designs)
ACML-0805-121-T (Abracon LLC), BBGK00201209121Y00 (Pulse Electronics), BLM21AG121SN1D (Murata Electronics), FB201209T-121Y-S-1 (Cal-Chip Electronics), and WLBD2012K2U121TP (Walsin Technology Corporation) are all Active status parts meeting the full electrical and mechanical specification set. These alternatives provide long-term availability and supply chain continuity. BLM21AG121SN1D offers the lowest DC resistance (100mOhm) and highest inventory (125,400 units). All five parts are ROHS3 compliant with MSL 1 rating.
Enhanced Performance Options
MH2029-121Y (Bourns Inc.) and MFBW1V2012-121-R (Eaton - Electronics Division) provide higher current ratings (2A) while maintaining 120 Ohm impedance and 0805 package compatibility. MH2029-121Y operates across the full -55°C ~ 125°C temperature range with 100mOhm DCR. MFBW1V2012-121-R operates within -40°C ~ 85°C range. These parts are suitable where increased current headroom is required.
Package Variant
MMZ1608S121ATA00 (TDK Corporation) is a 0603 (1608 Metric) package variant with identical impedance and temperature range. This part is not mechanically compatible with 0805 footprints and carries reduced current rating (500mA) and higher DCR (200mOhm). Selection requires PCB layout modification and is not recommended as a direct substitute.
Frequently Asked Questions (FAQ)
Q: Can MMZ1608S121ATA00 replace MMZ2012S121AT000?
A: No. MMZ1608S121ATA00 uses 0603 (1608 Metric) package, which is not mechanically compatible with 0805 (2012 Metric) footprints. Additionally, the 0603 variant has reduced current rating (500mA versus 800mA) and higher DC resistance (200mOhm versus 150mOhm). PCB redesign would be required.
Q: Which substitute offers the best long-term availability?
A: BLM21AG121SN1D from Murata Electronics carries Active product status with the highest inventory level (125,400 units) and meets all electrical specifications including lowest DC resistance (100mOhm). This part is recommended for new designs requiring extended supply assurance.
Q: Are all substitute parts ROHS3 compliant?
A: All listed substitute parts are ROHS3 compliant except FB201209T-121Y-S-1, which carries RoHS Compliant status. All parts have MSL 1 (Unlimited) moisture sensitivity rating.
Q: What is the difference between MMZ2012S121AT000, MMZ2012R121AT000, and MMZ2012Y121BT000?
A: All three are TDK Corporation 0805 package, 120 Ohm @ 100 MHz ferrite beads with 800mA current rating and -55°C ~ 125°C operating range. MMZ2012S121AT000 and MMZ2012R121AT000 have 150mOhm and 120mOhm DCR respectively. MMZ2012Y121BT000 has 120mOhm DCR with significantly higher inventory (81,864 units). All three carry Last Time Buy status.
Q: Can MH2029-121Y or MFBW1V2012-121-R be used in place of MMZ2012S121AT000?
A: Yes, both parts maintain 120 Ohm impedance, 0805 package, and -55°C ~ 125°C operating range. Both provide higher current ratings (2A) and lower DC resistance (100mOhm). MH2029-121Y is recommended over MFBW1V2012-121-R due to full temperature range coverage (-55°C ~ 125°C versus -40°C ~ 85°C).
Q: What packaging formats are available?
A: Substitute parts are available in Cut Tape (CT), Tape & Reel (TR), and Cut Tape with Digi-Reel® formats. Selection depends on procurement volume and assembly line requirements. Tape & Reel format is standard for high-volume production.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts