MMZ2012R300ATD25 Equivalent & Substitute Parts

Part Overview

The MMZ2012R300ATD25 is a 30 Ohm ferrite bead in 0805 (2012 Metric) surface mount package manufactured by TDK Corporation. This single-line signal ferrite bead operates at 100 MHz with a maximum current rating of 1.5A and DC resistance of 50mOhm. The part is classified as Last Time Buy, indicating limited future availability. Equivalent and substitute parts are necessary to ensure design continuity and supply chain flexibility for applications requiring ferrite bead filtering in signal line circuits.

Key Parameters

Parameter	Value
Impedance @ 100 MHz	30 Ohms
Package / Case	0805 (2012 Metric)
Current Rating (Max)	1.5A
DC Resistance (Max)	50mOhm
Filter Type	Signal Line
Number of Lines	1
Operating Temperature	-55°C ~ 125°C
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Ratings	AEC-Q200

Substitute Part Grouping Explanation

Substitution for the MMZ2012R300ATD25 is determined by the following critical parameters:

Primary Substitution Criteria:

Impedance at 100 MHz: 30 Ohms (exact match required)
Filter Type: Signal Line (functional requirement)
Number of Lines: 1 (circuit topology requirement)
Operating Temperature Range: -55°C ~ 125°C (environmental requirement)
RoHS3 Compliance: Required for regulatory alignment

Secondary Substitution Criteria:

Package / Case: 0805 (2012 Metric) preferred for PCB layout compatibility
Current Rating: Minimum 1.5A (equal or greater acceptable)
DC Resistance: Maximum 50mOhm (equal or lower acceptable)
Mounting Type: Surface Mount (assembly process requirement)

Substitutes are grouped into two categories: direct equivalents maintaining identical package and specifications, and parametric equivalents with enhanced electrical performance in the same package footprint.

Parameter Comparison

Parameter	MMZ2012R300ATD25 (Main)	MMZ1608R300ATD25	MMZ2012Y300BTD25	MH2029-300Y
Manufacturer	TDK Corporation	TDK Corporation	TDK Corporation	Bourns Inc.
Impedance @ 100 MHz	30 Ohms	30 Ohms	30 Ohms	30 Ohms
Package / Case	0805 (2012 Metric)	0603 (1608 Metric)	0805 (2012 Metric)	0805 (2012 Metric)
Current Rating (Max)	1.5A	1.5A	1.5A	3A
DC Resistance (Max)	50mOhm	50mOhm	50mOhm	25mOhm
Filter Type	Signal Line	Signal Line	Signal Line	Power, Signal Line
Number of Lines	1	1	1	1
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Last Time Buy	Active	Last Time Buy	Active

Engineering Selection Recommendations

MMZ1608R300ATD25 (TDK Corporation) This substitute maintains identical electrical specifications and AEC-Q200 rating. The primary design consideration is the reduced package size (0603 vs. 0805), which requires PCB layout verification for trace routing and component placement. This part is in Active product status, ensuring long-term availability. Selection is appropriate when space constraints permit the smaller footprint.

MMZ2012Y300BTD25 (TDK Corporation) This parametric equivalent maintains the 0805 package footprint and identical electrical performance. It is a direct form-fit-function replacement with no PCB layout modifications required. Product status is Last Time Buy, consistent with the main part. This substitute is optimal for designs requiring no layout changes.

MH2029-300Y (Bourns Inc.) This substitute provides enhanced electrical performance with 3A current rating (double the main part) and 25mOhm DC resistance (half the main part). The 0805 package footprint is identical. Product status is Active, providing superior long-term supply availability. This part is suitable for designs where improved thermal performance and higher current handling are beneficial or required. The expanded filter type designation (Power, Signal Line) indicates broader application capability.

Frequently Asked Questions (FAQ)

Q: Can MMZ1608R300ATD25 be used as a direct replacement for MMZ2012R300ATD25? A: Electrical substitution is valid. The 0603 package is smaller than the 0805 package. PCB layout must be verified to confirm the reduced footprint (1.60mm x 0.80mm vs. 2.00mm x 1.25mm) is compatible with existing trace routing and component placement.

Q: What is the primary difference between MMZ2012Y300BTD25 and MMZ2012R300ATD25? A: Both parts are identical in package, impedance, current rating, and DC resistance. The primary difference is the internal material composition (indicated by the Y vs. R designation), which does not affect electrical performance for the specified parameters. Both are Last Time Buy status.

Q: Why does MH2029-300Y have a higher current rating? A: The MH2029-300Y is manufactured by Bourns Inc. using different core material and construction. The 3A rating and 25mOhm DC resistance represent enhanced thermal and electrical performance compared to the TDK 1.5A / 50mOhm specification. This part is suitable for applications requiring higher current handling or lower insertion loss.

Q: Are all substitutes RoHS3 compliant? A: Yes. All listed substitutes (MMZ1608R300ATD25, MMZ2012Y300BTD25, and MH2029-300Y) are ROHS3 Compliant, maintaining regulatory alignment with the main part.

Q: Which substitute has the best long-term availability? A: MMZ1608R300ATD25 and MH2029-300Y both have Active product status, indicating ongoing manufacturing and supply. MMZ2012Y300BTD25 shares Last Time Buy status with the main part. For maximum supply chain security, MMZ1608R300ATD25 or MH2029-300Y are preferred.

Q: Can MH2029-300Y be used in all applications where MMZ2012R300ATD25 is specified? A: Yes, from an electrical standpoint. The MH2029-300Y meets or exceeds all critical parameters (impedance, frequency, temperature range, compliance). The enhanced current rating and lower DC resistance provide equal or superior performance. No design changes are required.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message