MMT-106-02-SM-SH-A-P-TR Equivalent & Substitute Parts

Part Overview

The MMT-106-02-SM-SH-A-P-TR is an active rectangular connector header manufactured by Samtec Inc., designed for surface mount, right-angle board-to-board or cable applications. This 6-position connector operates across -55°C to 125°C and carries a 3A current rating per contact. The part is ROHS3 compliant with UL94 V-0 flammability rating and MSL 1 moisture sensitivity level. Substitute parts are identified to address packaging format availability and inventory considerations while maintaining electrical and mechanical compatibility.

Substiute Parts

MMT-106-02-SM-SH-A-P-TR

Samtec Inc.In Stock: 900MMT-106-02-SM-SH-A-P-TR Datasheet

Current PartRFQ

MMT-106-02-S-SH-A-P-TR

Samtec Inc.In Stock: 2057MMT-106-02-S-SH-A-P-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MMT-106-02-SM-SH-A-P-TR is determined by equivalence across the following critical parameters:

• Connector type, contact type, and number of positions (Header, Male Pin, 6-position)
• Mating pitch and row configuration (0.079" / 2.00mm, single row)
• Mounting style and termination method (Surface Mount Right Angle, Solder)
• Contact geometry and material specifications (Square shape, Phosphor Bronze, Gold mating finish)
• Electrical performance (3A current rating, -55°C to 125°C operating range)
• Compliance and material standards (ROHS3, UL94 V-0, MSL 1)

The identified substitute part differs only in packaging format (Cut Tape vs. Tape & Reel), which does not affect electrical or mechanical compatibility. All other specifications remain identical.

Parameter Comparison

Engineering Selection Recommendations

Both the MMT-106-02-SM-SH-A-P-TR and MMT-106-02-S-SH-A-P-TR are active products from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on packaging and procurement requirements:

The main part (MMT-106-02-SM-SH-A-P-TR) is supplied in Tape & Reel format, suitable for high-volume automated assembly operations. The substitute part (MMT-106-02-S-SH-A-P-TR) is supplied in Cut Tape format, appropriate for lower-volume applications or manual assembly processes.

Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification. No functional or performance differences exist between these variants.

Frequently Asked Questions (FAQ)

Q: Are these parts electrically interchangeable?

A: Yes. Both parts share identical electrical specifications including 3A current rating, -55°C to 125°C operating temperature range, and contact material composition (Phosphor Bronze with gold mating finish).

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous tape wound on a reel, optimized for automated pick-and-place assembly. Cut Tape (CT) packaging supplies components on tape segments cut to specific lengths, suitable for manual handling or lower-volume assembly.

Q: Can I use the Cut Tape version in place of the Tape & Reel version?

A: Yes, provided your assembly process accommodates Cut Tape format. The connector specifications, performance characteristics, and compliance certifications are identical.

Q: Are both parts RoHS compliant?

A: Yes. Both MMT-106-02-SM-SH-A-P-TR and MMT-106-02-S-SH-A-P-TR are ROHS3 compliant.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Do these connectors require any special handling or storage conditions?

A: With MSL 1 rating, these connectors do not require controlled humidity storage or baking procedures prior to assembly.