MMST2222A-TP-HF Equivalent & Substitute Parts

Part Overview

The MMST2222A-TP-HF is an NPN bipolar junction transistor manufactured by Micro Commercial Co, designed for interface applications requiring small-signal amplification and switching in surface mount configurations. This device operates at a maximum collector current of 600 mA with a 40 V collector-emitter breakdown voltage and delivers 200 mW maximum power dissipation. The part is currently active in production with 842 pieces in stock.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across the specified parameter ranges. Alternative sources may be required due to supply chain considerations, packaging preferences, or application-specific compliance requirements.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN	—
Current - Collector (Ic) (Max)	600	mA
Voltage - Collector Emitter Breakdown (Max)	40	V
DC Current Gain (hFE) (Min) @ Ic, Vce	100 @ 150mA, 10V	—
Frequency - Transition	300	MHz
Power - Max	200	mW
Operating Temperature Range	-55 to 150	°C (TJ)
Mounting Type	Surface Mount	—
Package / Case	SC-70, SOT-323	—

Substitute Part Grouping Explanation

Substitution eligibility for the MMST2222A-TP-HF is determined by the following critical parameters:

Electrical Compatibility Requirements:

Transistor type must be NPN
Maximum collector current (Ic) must be 600 mA or greater
Collector-emitter breakdown voltage (Vce) must be 40 V or greater
DC current gain (hFE) minimum must be 100 or greater at specified test conditions
Operating temperature range must encompass -55°C to 150°C

Mechanical Compatibility Requirements:

Mounting type must be Surface Mount
Package must be SC-70 or SOT-323 equivalent

Identified Substitutes:

The MMBT2222AWT3G (onsemi) meets all electrical and mechanical compatibility criteria. This device maintains identical maximum collector current (600 mA), collector-emitter breakdown voltage (40 V), DC current gain (100 @ 150mA, 10V), transition frequency (300 MHz), and operating temperature range (-55°C to 150°C). The package format is SC-70-3 (SOT323), which is mechanically equivalent to the SOT-323 of the main part.

The NSVMMBT4401WT1G (onsemi) meets all electrical and mechanical compatibility criteria with the following considerations: maximum collector current (600 mA), collector-emitter breakdown voltage (40 V), DC current gain (100 @ 150mA, 1V), and operating temperature range (-55°C to 150°C) are maintained. The transition frequency is 250 MHz, which is lower than the main part's 300 MHz specification. The package format is SC-70-3 (SOT323), which is mechanically equivalent. This device carries AEC-Q101 automotive qualification.

Parameter Comparison

Parameter	MMST2222A-TP-HF (Micro Commercial Co)	MMBT2222AWT3G (onsemi)	NSVMMBT4401WT1G (onsemi)
Transistor Type	NPN	NPN	NPN
Current - Collector (Ic) (Max)	600 mA	600 mA	600 mA
Voltage - Collector Emitter Breakdown (Max)	40 V	40 V	40 V
DC Current Gain (hFE) (Min) @ Ic, Vce	100 @ 150mA, 10V	100 @ 150mA, 10V	100 @ 150mA, 1V
Frequency - Transition	300 MHz	300 MHz	250 MHz
Power - Max	200 mW	150 mW	150 mW
Operating Temperature Range	-55°C to 150°C (TJ)	-55°C to 150°C (TJ)	-55°C to 150°C (TJ)
Mounting Type	Surface Mount	Surface Mount	Surface Mount
Package / Case	SC-70, SOT-323	SC-70, SOT-323	SC-70, SOT-323
Product Status	Active	Active	Active
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected

Engineering Selection Recommendations

MMBT2222AWT3G Selection Criteria:

The MMBT2222AWT3G is an active product with ROHS3 compliance and REACH unaffected status. This substitute maintains electrical parity with the main part across all critical parameters: identical maximum collector current, breakdown voltage, DC current gain, and transition frequency. The SC-70-3 (SOT323) package is mechanically equivalent to the main part's SOT-323 specification. Maximum power dissipation is reduced to 150 mW compared to the main part's 200 mW; applications requiring the full 200 mW specification must account for this limitation. Moisture sensitivity level is rated as 1 (Unlimited), indicating no special handling requirements.

NSVMMBT4401WT1G Selection Criteria:

The NSVMMBT4401WT1G is an active product with ROHS3 compliance, REACH unaffected status, and AEC-Q101 automotive qualification. This substitute maintains electrical compatibility with maximum collector current and breakdown voltage specifications. The transition frequency is 250 MHz, which is 50 MHz lower than the main part's 300 MHz specification; applications with frequency-dependent performance requirements must evaluate this parameter. Maximum power dissipation is 150 mW. The automotive qualification (AEC-Q101) indicates suitability for automotive-grade applications. Moisture sensitivity level is rated as 1 (Unlimited).

Both substitutes are suitable for applications where the main part is unavailable, provided that the noted parameter differences do not conflict with circuit requirements.

Frequently Asked Questions (FAQ)

Q: Can MMBT2222AWT3G be used as a direct replacement for MMST2222A-TP-HF?

A: The MMBT2222AWT3G maintains electrical equivalence across all critical parameters: 600 mA maximum collector current, 40 V breakdown voltage, 100 minimum DC current gain, and 300 MHz transition frequency. The SC-70-3 (SOT323) package is mechanically compatible. The maximum power dissipation is reduced from 200 mW to 150 mW; verify that circuit power requirements do not exceed 150 mW.

Q: What is the primary difference between MMBT2222AWT3G and NSVMMBT4401WT1G?

A: Both devices share identical maximum collector current (600 mA) and breakdown voltage (40 V) specifications. The MMBT2222AWT3G maintains 300 MHz transition frequency, while the NSVMMBT4401WT1G operates at 250 MHz. The NSVMMBT4401WT1G carries AEC-Q101 automotive qualification, making it suitable for automotive applications. Both have 150 mW maximum power dissipation.

Q: Are there package compatibility concerns when substituting these parts?

A: All three parts use SC-70 or SOT-323 package formats, which are mechanically equivalent. Surface mount assembly equipment and PCB footprints designed for SOT-323 are compatible with all listed parts. No package-related modifications are required.

Q: Does the reduced power rating of substitute parts affect circuit operation?

A: The MMBT2222AWT3G and NSVMMBT4401WT1G are rated for 150 mW maximum power dissipation, compared to the main part's 200 mW. Applications must ensure that actual power dissipation remains within the 150 mW limit. Calculate power dissipation as P = Vce × Ic at maximum operating conditions to verify compatibility.

Q: What compliance certifications apply to these substitute parts?

A: The MMBT2222AWT3G and NSVMMBT4401WT1G are both ROHS3 compliant and REACH unaffected. The NSVMMBT4401WT1G additionally carries AEC-Q101 automotive qualification. All parts are classified under ECCN EAR99 and HTSUS 8541.21.0075.

Q: Can NSVMMBT4401WT1G be used in non-automotive applications?

A: Yes. The NSVMMBT4401WT1G is qualified to AEC-Q101 automotive standards but is not restricted to automotive use. It is suitable for general-purpose interface and switching applications. The 250 MHz transition frequency and 150 mW power rating apply regardless of application type.

Q: What is the significance of the DC current gain test condition difference between MMBT2222AWT3G and NSVMMBT4401WT1G?

A: The MMBT2222AWT3G specifies DC current gain (hFE) minimum of 100 at Ic = 150 mA and Vce = 10 V. The NSVMMBT4401WT1G specifies the same minimum gain at Ic = 150 mA but Vce = 1 V. Both devices meet the 100 minimum gain requirement; the test conditions reflect different characterization methodologies. For circuit design purposes, both devices provide equivalent DC current gain performance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message