MMS9015-H-TP Equivalent & Substitute Parts

Part Overview

The MMS9015-H-TP is a PNP bipolar junction transistor manufactured by Micro Commercial Co, designed for interface applications in surface mount configurations. This transistor operates at a maximum collector current of 100 mA, collector-emitter breakdown voltage of 45 V, and transition frequency of 150 MHz, with a maximum power dissipation of 200 mW. The device is packaged in SOT-23 (TO-236-3) surface mount format and maintains active product status with 1106 units in current inventory.

Equivalent and substitute parts are identified based on matching electrical specifications and mechanical compatibility. Substitutes must maintain compatibility with the SOT-23 surface mount package and satisfy the core electrical parameters: PNP transistor type, 100 mA maximum collector current, 45 V minimum collector-emitter breakdown voltage, and surface mount packaging.

Key Parameters

Parameter	MMS9015-H-TP Value	Unit
Transistor Type	PNP	—
Current - Collector (Ic) Max	100	mA
Voltage - Collector Emitter Breakdown (Max)	45	V
Vce Saturation (Max)	300 mV @ 10 mA, 100 mA	—
Current - Collector Cutoff (Max)	100	nA
DC Current Gain (hFE) Min	200 @ 1 mA, 5 V	—
Power - Max	200	mW
Frequency - Transition	150	MHz
Operating Temperature Range	-55 to 150	°C
Mounting Type	Surface Mount	—
Package / Case	TO-236-3, SC-59, SOT-23-3	—

Substitute Part Grouping Explanation

Substitution of the MMS9015-H-TP is determined by the following critical parameters:

Mandatory Matching Criteria:

Transistor Type: PNP
Current - Collector (Ic) Max: 100 mA
Voltage - Collector Emitter Breakdown (Max): 45 V or greater
Mounting Type: Surface Mount
Package / Case: TO-236-3, SC-59, or SOT-23-3 compatible

Allowable Variation Parameters:

Power - Max: 200 mW or greater
Frequency - Transition: 150 MHz or greater (or unspecified)
DC Current Gain (hFE): May vary within device specifications
Vce Saturation: May vary within acceptable operating ranges
Current - Collector Cutoff (Max): May vary within acceptable leakage specifications

Substitute parts are grouped into two categories based on voltage rating and frequency characteristics:

Group 1 - 45 V Rated Devices (Direct Substitutes): BC857ALT1G, BC857B,215, BC857BLT3G, BC857CLT1G, BCW70LT1G, BCX71J,215, BCX71K,235. These devices maintain the 45 V collector-emitter breakdown voltage specification and are fully compatible with the MMS9015-H-TP electrical requirements.

Group 2 - Enhanced Voltage Rating (60 V Rated): BCW89,215. This device exceeds the 45 V requirement with a 60 V collector-emitter breakdown voltage rating, providing additional design margin while maintaining all other critical parameters.

Parameter Comparison

Part Number	Manufacturer	Ic Max (mA)	Vce Breakdown (V)	Power Max (mW)	Frequency (MHz)	hFE Min @ 2mA, 5V	Package	Temp Range (°C)
MMS9015-H-TP	Micro Commercial Co	100	45	200	150	200 @ 1mA, 5V	SOT-23	-55 to 150
BC857ALT1G	onsemi	100	45	300	100	125	SOT-23-3	-55 to 150
BC857B,215	Nexperia USA Inc.	100	45	250	100	220	SOT-23-3	-55 to 150
BC857BLT3G	onsemi	100	45	300	100	220	SOT-23-3	-55 to 150
BC857CLT1G	onsemi	100	45	300	100	420	SOT-23-3	-55 to 150
BC860C,235	Nexperia USA Inc.	100	45	250	100	420	SOT-23-3	-55 to 150
BCW70LT1G	onsemi	100	45	225	—	215	SOT-23-3	-55 to 150
BCW89,215	Nexperia USA Inc.	100	60	250	150	120	SOT-23-3	-55 to 150
BCX71J,215	Nexperia USA Inc.	100	45	250	100	250	SOT-23-3	-55 to 150
BCX71K,235	Nexperia USA Inc.	100	45	250	100	380	SOT-23-3	-55 to 150

Engineering Selection Recommendations

Direct Substitutes (45 V Rated, Equivalent Performance):

BC857BLT3G and BC857CLT1G (onsemi) are fully compatible substitutes with enhanced power dissipation (300 mW) and extended DC current gain specifications. Both devices maintain the -55°C to 150°C operating temperature range and are RoHS3 compliant with MSL 1 rating.

BC857B,215 (Nexperia USA Inc.) is an automotive-qualified substitute (AEC-Q101) with 250 mW power rating and 220 hFE minimum specification. This device is suitable for applications requiring automotive-grade components.

BCX71J,215 and BCX71K,235 (Nexperia USA Inc.) are automotive-qualified substitutes (AEC-Q101 and AEC-Q100 respectively) with 250 mW power rating. BCX71K,235 provides higher DC current gain (380 hFE minimum) and is available in tape and reel packaging.

Enhanced Voltage Rating Substitute (60 V Rated):

BCW89,215 (Nexperia USA Inc.) is an automotive-qualified substitute (AEC-Q101) with 60 V collector-emitter breakdown voltage, matching the 150 MHz transition frequency of the MMS9015-H-TP. This device is suitable for applications requiring higher voltage margin while maintaining equivalent current and frequency specifications.

Lower Performance Substitute:

BCW70LT1G (onsemi) is a compatible substitute with 225 mW power rating and 215 hFE minimum specification. This device does not specify transition frequency but maintains all critical electrical parameters for standard interface applications.

All substitute parts are active products with current inventory availability and REACH compliance status matching the original MMS9015-H-TP specification.

Frequently Asked Questions (FAQ)

Q: Can BC857BLT3G replace MMS9015-H-TP in all applications?

A: BC857BLT3G is electrically compatible with MMS9015-H-TP for applications operating within 45 V collector-emitter breakdown voltage and 100 mA collector current limits. The substitute provides 300 mW power dissipation compared to 200 mW in the original part, offering additional thermal margin. Both devices operate across -55°C to 150°C temperature range and use identical SOT-23-3 packaging. Verification of DC current gain requirements is necessary, as BC857BLT3G specifies 220 hFE minimum at 2 mA, 5 V compared to 200 hFE minimum at 1 mA, 5 V for MMS9015-H-TP.

Q: What is the difference between 45 V and 60 V rated substitutes?

A: The 45 V rated substitutes (BC857 series, BCX71 series, BCW70LT1G) maintain the exact collector-emitter breakdown voltage specification of MMS9015-H-TP. The 60 V rated substitute (BCW89,215) provides higher voltage margin and is suitable for applications where additional design headroom is beneficial. Both voltage ratings are compatible with the MMS9015-H-TP electrical interface, as the 60 V device operates safely within 45 V maximum operating conditions.

Q: Are automotive-qualified substitutes interchangeable with the standard MMS9015-H-TP?

A: Automotive-qualified substitutes (BC857B,215, BCX71J,215, BCX71K,235, BCW89,215) are electrically and mechanically interchangeable with MMS9015-H-TP for standard applications. These parts carry AEC-Q101 or AEC-Q100 automotive qualification and RoHS3 compliance. Selection of automotive-qualified parts is appropriate for applications requiring enhanced reliability documentation or automotive supply chain traceability.

Q: What packaging options are available for substitutes?

A: All substitute parts use SOT-23-3 (TO-236-3, SC-59) surface mount packaging, identical to MMS9015-H-TP. Packaging variations exist only in supplier format: tape and reel (TR), cut tape (CT) with Digi-Reel, or bulk. These format differences do not affect electrical or mechanical compatibility; selection depends on procurement and assembly requirements.

Q: How do DC current gain (hFE) variations affect substitution?

A: DC current gain specifications vary among substitutes: BC857ALT1G (125 hFE minimum), BC857B,215 (220 hFE minimum), BC857CLT1G (420 hFE minimum), BCX71J,215 (250 hFE minimum), and BCX71K,235 (380 hFE minimum). The MMS9015-H-TP specifies 200 hFE minimum at 1 mA, 5 V. Higher hFE values provide increased current amplification; lower values require higher base current for equivalent collector current. Selection depends on circuit bias network design and required gain characteristics.

Q: Is BCW70LT1G suitable as a substitute if transition frequency is not specified?

A: BCW70LT1G is electrically compatible with MMS9015-H-TP for DC and low-frequency applications. The absence of specified transition frequency indicates this device is optimized for lower-speed interface applications. For circuits requiring 150 MHz operation or higher frequency performance, BC857BLT3G, BC857CLT1G, or BCW89,215 are preferred substitutes, as these devices specify 100 MHz or 150 MHz transition frequency.

Q: What is the significance of Vce saturation differences among substitutes?

A: Vce saturation specifications vary: MMS9015-H-TP (300 mV @ 10 mA, 100 mA), BC857 series (650 mV @ 5 mA, 100 mA), BCW70LT1G (300 mV @ 500 µA, 10 mA), BCW89,215 (150 mV @ 2.5 mA, 50 mA), and BCX71 series (550 mV @ 1.25 mA, 50 mA). Lower saturation voltage reduces power dissipation in saturated switching applications. Selection depends on circuit operating point and power budget requirements.

Q: Are all substitutes RoHS3 compliant?

A: All listed substitute parts are RoHS3 compliant with REACH unaffected status, matching the environmental compliance of MMS9015-H-TP. Moisture sensitivity level (MSL) is rated 1 (unlimited) for all substitutes, indicating no special moisture control requirements during storage or assembly.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message