MMS-113-02-L-DV-P-TR Equivalent & Substitute Parts

Part Overview

The MMS-113-02-L-DV-P-TR is a 26-position receptacle connector manufactured by Samtec Inc., designed for surface mount board-to-board or cable applications. This connector features a 0.079" (2.00mm) pitch with gold-plated mating contacts and push-pull fastening. The part is currently active in production with 1109 units in stock. Equivalent parts are identified when all critical electrical and mechanical parameters align, enabling direct substitution in circuit designs without redesign requirements.

Substiute Parts

MMS-113-02-L-DV-P-TR

Samtec Inc.In Stock: 1147MMS-113-02-L-DV-P-TR Datasheet

Current PartRFQ

MMS-113-02-L-DV-K-TR

Samtec Inc.In Stock: 1434MMS-113-02-L-DV-K-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MMS-113-02-L-DV-P-TR is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (26)
• Pitch specification (0.079" / 2.00mm mating pitch)
• Row configuration (2 rows with 0.079" spacing)
• Mounting technology (Surface Mount)
• Contact finish (Gold plating)
• Insulation material (Liquid Crystal Polymer)
• Current rating (3.9A per contact)
• Operating temperature range (-55°C ~ 125°C)
• Product status (Active)
• RoHS compliance (ROHS3)

The identified substitute part MMS-113-02-L-DV-K-TR matches all these parameters, differing only in the fastening mechanism designation within the part number suffix, while maintaining identical electrical and mechanical performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both MMS-113-02-L-DV-P-TR and MMS-113-02-L-DV-K-TR are active production parts with ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and supply chain requirements. The MMS-113-02-L-DV-K-TR currently has higher inventory (1418 units versus 1109 units), which may provide supply chain advantages for high-volume production. Both parts carry MSL 1 (Unlimited) moisture sensitivity classification, eliminating special storage or handling requirements. Export classification (EAR99) and tariff codes are identical for both variants.

Frequently Asked Questions (FAQ)

Q: Can MMS-113-02-L-DV-K-TR be used as a direct replacement for MMS-113-02-L-DV-P-TR?

A: Yes. Both parts are electrically and mechanically equivalent across all specified parameters including connector type, position count, pitch, mounting technology, contact finish, current rating, and operating temperature range.

Q: What is the difference between the P and K designations in the part numbers?

A: The P and K suffixes represent different fastening mechanism variants within the MMS-113 series. Both variants maintain identical electrical performance and physical dimensions for the 26-position 2.00mm pitch receptacle configuration.

Q: Are there any packaging or handling differences between these parts?

A: Both parts are supplied in Tape & Reel (TR) packaging with identical MSL 1 (Unlimited) moisture sensitivity levels. No special storage or handling procedures are required for either variant.

Q: Do both parts meet the same compliance standards?

A: Yes. Both MMS-113-02-L-DV-P-TR and MMS-113-02-L-DV-K-TR are ROHS3 compliant with identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Q: Which part should be selected for new designs?

A: Selection should be based on supply chain availability and inventory levels. Both parts are active production items with equivalent performance. The MMS-113-02-L-DV-K-TR currently has higher inventory availability.