MMS-106-02-L-DV-P Equivalent & Substitute Parts

Part Overview

The MMS-106-02-L-DV-P is a 12-position receptacle connector manufactured by Samtec Inc., designed for surface mount board-to-board or cable applications. This connector features a 0.079" (2.00mm) pitch with gold-plated mating contacts and push-pull fastening. The part is currently active in production with 770 units in stock. Substitute parts are identified when identical electrical and mechanical specifications are required but alternative part numbers offer improved availability, lead times, or inventory positioning.

Substiute Parts

MMS-106-02-L-DV-P

Samtec Inc.In Stock: 851MMS-106-02-L-DV-P Datasheet

Current PartRFQ

MMS-106-02-L-DV-K

Samtec Inc.In Stock: 1005MMS-106-02-L-DV-K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MMS-106-02-L-DV-P is determined by strict equivalence across the following critical parameters:

• Connector type: Receptacle
• Number of positions: 12
• Pitch - mating: 0.079" (2.00mm)
• Number of rows: 2
• Row spacing - mating: 0.079" (2.00mm)
• Mounting type: Surface Mount
• Contact finish - mating: Gold
• Current rating: 3.9A per Contact
• Operating temperature: -55°C ~ 125°C
• RoHS status: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

The MMS-106-02-L-DV-P has one identified substitute part: MMS-106-02-L-DV-K. Both parts share identical electrical and mechanical specifications, differing only in internal design or manufacturing process details not reflected in the provided parameter set.

Parameter Comparison

Engineering Selection Recommendations

Both MMS-106-02-L-DV-P and MMS-106-02-L-DV-K are active production parts with full ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and lead time requirements. The MMS-106-02-L-DV-K currently has higher stock levels (940 units versus 770 units), which may provide supply chain advantages for high-volume applications. Both parts meet the same environmental and compliance standards and are suitable for equivalent circuit applications.

Frequently Asked Questions (FAQ)

Q: Can MMS-106-02-L-DV-K be used as a direct replacement for MMS-106-02-L-DV-P?

A: Yes. Both parts are electrically and mechanically equivalent across all specified parameters, including connector type, position count, pitch, mounting type, contact finish, current rating, and operating temperature range.

Q: What are the key differences between these two part numbers?

A: The provided specifications show no differences in electrical or mechanical parameters. Both parts are manufactured by Samtec Inc. within the MMS-106 series and share identical performance characteristics.

Q: Are there any compatibility concerns when substituting between these parts?

A: No compatibility concerns exist. Both parts feature identical mating pitch (0.079"), row spacing (0.079"), contact finish (gold), and mounting configuration (surface mount). They are fully interchangeable in board-to-board and cable applications.

Q: Do both parts meet the same compliance standards?

A: Yes. Both MMS-106-02-L-DV-P and MMS-106-02-L-DV-K are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: Which part should be selected for new designs?

A: Selection should be based on current inventory and supply availability. Both parts are active production items suitable for new designs. The MMS-106-02-L-DV-K offers higher current stock levels.