MMS-104-02-S-DV-TR Equivalent & Substitute Parts

Part Overview

The MMS-104-02-S-DV-TR is an 8-position receptacle connector manufactured by Samtec Inc., designed for surface mount board-to-board or cable applications. This connector features a 0.079" (2.00mm) pitch with gold-plated mating contacts and is rated for 3.9A per contact across an operating temperature range of -55°C to 125°C. The part maintains Active product status and is RoHS3 compliant with MSL 1 rating.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector series, allowing for alternative sourcing while preserving circuit functionality and assembly compatibility.

Substiute Parts

MMS-104-02-S-DV-TR

Samtec Inc.In Stock: 1025MMS-104-02-S-DV-TR Datasheet

Current PartRFQ

MMS-104-02-SM-DV-K-TR

Samtec Inc.In Stock: 1740MMS-104-02-SM-DV-K-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MMS-104-02-S-DV-TR is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (8)
• Mating pitch (0.079" / 2.00mm)
• Row configuration (2 rows with 0.079" spacing)
• Surface mount termination
• Gold mating contact finish
• Current rating (3.9A per contact)
• Operating temperature range (-55°C ~ 125°C)
• Insulation material (LCP)
• RoHS3 compliance

The identified substitute part MMS-104-02-SM-DV-K-TR maintains all electrical and mechanical parameters required for direct substitution. The difference in packaging format (Tape & Reel versus Cut Tape) does not affect connector performance or circuit compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the MMS-104-02-S-DV-TR and MMS-104-02-SM-DV-K-TR maintain Active product status from Samtec Inc. and are fully RoHS3 compliant with MSL 1 rating. The electrical and mechanical specifications are identical, confirming functional equivalence for circuit applications.

Selection between these parts should be based on assembly process requirements and supply chain considerations. The Tape & Reel packaging of the primary part supports automated high-volume production environments, while the Cut Tape packaging of the substitute part accommodates lower-volume or mixed-component assembly scenarios.

Frequently Asked Questions (FAQ)

Q: Can MMS-104-02-SM-DV-K-TR be used as a direct replacement for MMS-104-02-S-DV-TR?

A: Yes. Both connectors share identical electrical ratings (3.9A per contact), mechanical dimensions (8 positions, 0.079" pitch, 2-row configuration), contact materials (phosphor bronze with 30.0µin gold plating), and operating specifications (-55°C to 125°C). The difference in packaging format does not affect connector performance or PCB compatibility.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, optimized for automated pick-and-place assembly. Cut Tape packaging provides the same components on shorter tape segments, suitable for manual assembly or lower-volume production runs. Both formats contain identical connector components.

Q: Are both parts RoHS3 compliant?

A: Yes. Both MMS-104-02-S-DV-TR and MMS-104-02-SM-DV-K-TR are RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, meeting regulatory requirements for commercial and industrial applications.

Q: What mating connector should be used with these receptacles?

A: These 8-position receptacles with 0.079" (2.00mm) pitch and 2-row configuration mate with corresponding Samtec MMS series plug connectors of matching pitch and position count. Verify plug part number compatibility with your connector supplier.

Q: Can these connectors be used interchangeably in the same circuit design?

A: Yes. The identical electrical and mechanical parameters ensure functional interchangeability. PCB footprints, solder pad layouts, and mating interface specifications are equivalent between both parts.