MMRF2007NR1 Equivalent & Substitute Parts Reference

Part Overview

The MMRF2007NR1 is an RF MOSFET LDMOS transistor produced by NXP USA Inc., classified under the Transistors, FETs, MOSFETs category. This component is designed for operation at 28 V, a test current of 60 mA, with an output power of 35 W and 32.6 dB gain at 940 MHz, housed in a TO-270-16 variant package. The part status is obsolete, necessitating the identification of alternative models for continued design and maintenance of RF power amplifier applications.

Substiute Parts

MMRF2007NR1

NXP USA Inc.In Stock: 831MMRF2007NR1 Datasheet

Current PartRFQ

MD8IC970NR1

NXP USA Inc.In Stock: 944MD8IC970NR1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the MMRF2007NR1 is based strictly on matching frequency range, package type, mounting method, and compliance standards. Only parts with the exact or overlapping operating frequency, matching TO-270-16 variant flat lead package, surface mount compatibility, and equivalent RoHS/REACH compliance are considered equivalents or substitutes.

Key parameters considered:

• Frequency
• Mounting Type
• Package / Case
• Supplier Device Package
• RoHS Status
• Moisture Sensitivity Level (MSL)
• REACH Status

Parameter Comparison

Engineering Selection Recommendations

The MMRF2007NR1 is classified as obsolete. Its direct substitute, MD8IC970NR1, is active and maintains ROHS3 compliance, identical MSL (3 – 168 Hours), and REACH unaffected status. Both parts utilize the same package and mounting configuration, supporting straightforward substitution in compatible circuit footprints when only regulatory, form factor, and frequency compatibility are used as selection criteria.

Frequently Asked Questions (FAQ)

Q1: What package should be used when directly replacing MMRF2007NR1?
A: Both MMRF2007NR1 and MD8IC970NR1 use the TO-270-16 variant with flat leads, and are intended for surface mount installations.

Q2: Which frequency range does the substitute part MD8IC970NR1 cover?
A: MD8IC970NR1 covers 850MHz to 940MHz. The MMRF2007NR1 operates at 940MHz, fitting within this range.

Q3: Do both MMRF2007NR1 and MD8IC970NR1 comply with RoHS and REACH standards?
A: Yes, both parts are ROHS3 Compliant and REACH Unaffected.

Q4: Are there any differences in Moisture Sensitivity Level (MSL) between the parts?
A: No, both MMRF2007NR1 and MD8IC970NR1 have a Moisture Sensitivity Level of 3 (168 Hours).

Q5: Is the MD8IC970NR1 an active part?
A: Yes, MD8IC970NR1 is listed as active, while MMRF2007NR1 is obsolete.

Q6: Are there differences in physical mounting or pinout between these two parts?
A: Both use the same TO-270 WBL-16 package with surface mount capability. Pinout is governed by the package, which is common between the two.

Q7: What are the primary criteria for selecting a substitute for MMRF2007NR1 in this category?
A: The main criteria are frequency compatibility, matching package type, mounting method, and compliance standards as provided.