MMRF1006HSR5 Equivalent & Substitute Parts Reference Page

Part Overview

The NXP USA Inc. MMRF1006HSR5 is an RF MOSFET LDMOS transistor, rated for 50 V operation, 150 mA test current, 450 MHz frequency, 20 dB gain, and 1000 W output power, housed in the NI-1230S-4 package. This part is classified as obsolete. Due to its discontinued status, sourcing suitable substitute models is necessary for engineering applications requiring direct component replacement within the "Transistors, FETs, MOSFETs" category.

Substiute Parts

MMRF1006HSR5

NXP USA Inc.In Stock: 1104MMRF1006HSR5 Datasheet

Current PartRFQ

MRF1K50HR5

NXP USA Inc.In Stock: 1014MRF1K50HR5 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute part selection for the MMRF1006HSR5 is determined strictly by matching category (Transistors, FETs, MOSFETs), technology (LDMOS), voltage rating, gain, frequency range, output power, and package similarity. Only substitutes meeting these parameters as provided can be considered equivalent for direct replacement, irrespective of other technical or system-specific details.

Key substitution parameters:

• Category: Transistors, FETs, MOSFETs
• Technology: LDMOS
• Voltage Rating and Test Voltage
• Frequency Range
• Gain
• Output Power
• Package / Case
• RoHS and REACH Status
• ECCN code

Parameter Comparison

Engineering Selection Recommendations

The MMRF1006HSR5 is obsolete, necessitating the use of substitute parts for ongoing designs and maintenance applications. Substitute model MRF1K50HR5 is categorized as "Active" by NXP USA Inc. Both parts align within ECCN code EAR99 and share REACH unaffected status. The main part is ROHS3 Compliant, while the substitute is designated RoHS non-compliant. Selection should consider only the explicit status and certifications provided above.

Frequently Asked Questions (FAQ)

Q: What parameters must be matched for safe substitution of MMRF1006HSR5 in an application?
A: Substitution requires alignment in category (Transistors, FETs, MOSFETs), technology (LDMOS), frequency range, gain, output power, voltage rating, and package or supplier device package.

Q: Are there compliance differences between MMRF1006HSR5 and substitutes?
A: MMRF1006HSR5 is ROHS3 Compliant; substitute MRF1K50HR5 is RoHS non-compliant. Both are REACH unaffected and classified under ECCN EAR99.

Q: Is the physical package identical between the main and substitute parts?
A: MMRF1006HSR5 uses the NI-1230S-4 package. Substitute MRF1K50HR5 uses SOT-979A and supplier device package NI-1230-4H.

Q: What is the main reason for seeking substitutes for MMRF1006HSR5?
A: The main part is obsolete; substitute components are required for ongoing availability in applications and maintenance.

Q: Are all electrical parameters matched between main and substitute parts?
A: Only parameters explicitly provided above can be matched: category, technology, voltage, gain, frequency range, output power, package details, and compliance statements.