MMP1W2P2K-F Equivalent & Substitute Parts

Part Overview

The MMP1W2P2K-F is a 2.2 µF film capacitor manufactured by Cornell Dubilier Electronics (CDE) in the MMP series. This axial-mounted through-hole component operates across a temperature range of -55°C to 125°C with a 100V DC voltage rating and ±10% capacitance tolerance. The part is classified as Active and carries RoHS3 compliance certification. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility requirements are met, enabling component procurement flexibility while maintaining circuit performance.

Substiute Parts

MMP1W2P2K-F

Cornell Dubilier Electronics (CDE)In Stock: 827MMP1W2P2K-F Datasheet

Current PartRFQ

150225K100LE

Cornell Dubilier Electronics (CDE)In Stock: 1189150225K100LE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MMP1W2P2K-F is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Capacitance value: 2.2 µF (exact match)
• Capacitance tolerance: ±10% (exact match)
• Voltage rating - DC: 100V (minimum requirement; equal or higher ratings are acceptable)
• Dielectric material: Polyester, Metallized (exact match)
• Operating temperature range: -55°C ~ 125°C (minimum requirement; equal or wider ranges are acceptable)

Mechanical Compatibility Requirements:

• Mounting type: Through Hole (exact match)
• Package / Case: Axial (exact match)
• Termination: PC Pins (exact match)
• Applications: General Purpose (exact match)

Compliance Requirements:

• RoHS3 Compliant status (required for regulatory equivalence)

The substitute part 150225K100LE meets all electrical and mechanical criteria for direct substitution. Physical dimensions differ between the main part and substitute; however, both are axial through-hole configurations suitable for standard PCB mounting applications.

Parameter Comparison

Engineering Selection Recommendations

Both the MMP1W2P2K-F and 150225K100LE are Active products manufactured by Cornell Dubilier Electronics with identical electrical specifications and full regulatory compliance. Selection between these parts is based on the following factors:

Inventory Availability: The MMP1W2P2K-F maintains 773 pieces in stock, while the 150225K100LE has 1164 pieces available. Component selection may be driven by procurement lead time requirements and supply chain considerations.

Packaging: The MMP1W2P2K-F is supplied in standard packaging, while the 150225K100LE is supplied in bulk packaging. Packaging selection depends on order quantity and inventory management protocols.

Physical Dimensions: The MMP1W2P2K-F measures 0.630" W × 0.354" T × 1.063" L (16.00mm × 9.00mm × 27.00mm). The 150225K100LE measures 0.453" Dia × 1.102" L (11.50mm × 28.00mm). PCB layout constraints and available mounting space determine dimensional suitability for specific applications.

Regulatory Compliance: Both parts are RoHS3 Compliant, REACH Unaffected, and classified under ECCN EAR99 with HTSUS code 8532.25.0010. No compliance barriers exist for substitution.

Frequently Asked Questions (FAQ)

Q: Can the 150225K100LE directly replace the MMP1W2P2K-F in all applications?

A: Yes. Both parts share identical electrical specifications (2.2 µF, ±10%, 100V DC), dielectric material (Polyester, Metallized), operating temperature range (-55°C ~ 125°C), and mounting configuration (Through Hole, Axial, PC Pins). Physical dimensions differ; verify PCB layout accommodates the 150225K100LE's 11.50mm diameter and 28.00mm length before substitution.

Q: What are the key electrical parameters that must match for substitution?

A: Capacitance (2.2 µF), tolerance (±10%), DC voltage rating (100V), and dielectric material (Polyester, Metallized) must be identical. The AC voltage rating difference (65V vs. 63V) does not affect substitution validity as both are derived specifications below the DC rating.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical certifications: RoHS3 Compliant, REACH Unaffected, MSL 1 (Unlimited), and ECCN EAR99 classification. Regulatory substitution is unrestricted.

Q: How do the physical dimensions affect component selection?

A: The MMP1W2P2K-F is larger (16.00mm × 9.00mm × 27.00mm) compared to the 150225K100LE (11.50mm diameter × 28.00mm length). PCB layout, available mounting space, and lead spacing requirements determine which part is mechanically suitable. Both are axial through-hole configurations compatible with standard PCB drilling patterns.

Q: What is the difference between standard and bulk packaging?

A: The MMP1W2P2K-F is supplied in standard packaging (773 pieces available), while the 150225K100LE is supplied in bulk packaging (1164 pieces available). Packaging type affects order quantity minimums, storage requirements, and procurement logistics but does not impact electrical or mechanical performance.

Q: Can I use the 150225K100LE if the MMP1W2P2K-F is unavailable?

A: Yes. The 150225K100LE is a direct electrical and mechanical equivalent. Verify physical dimensions fit the PCB layout before implementation.