Equivalent & Substitute Parts for MMP0120/ARDS

Part Overview

The MMP0120/ARDS is a pushbutton switch manufactured by Bulgin, classified as a SPST-NO (Single Pole Single Throw - Normally Open) standard panel mount component. This switch is designed for applications requiring 2A DC at 36V with IP65 ingress protection. The product is currently active in inventory with 806 units available. Alternative equivalent parts may be required due to supply chain considerations, packaging preferences, or specific application requirements where substitute models meet identical electrical and mechanical specifications.

Substiute Parts

MMP0120/ARDS

BulginIn Stock: 894MMP0120/ARDS Datasheet

Current PartRFQ

PV5S64019G

E-SwitchIn Stock: 1224PV5S64019G Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MMP0120/ARDS is determined by strict alignment with the following critical parameters:

• Circuit configuration must be SPST-NO
• Current rating must be 2A DC minimum
• Voltage rating must be 36V DC minimum
• Panel mount, front-facing orientation required
• Panel cutout diameter must be 12.00mm circular
• Screw terminal termination required
• IP65 ingress protection minimum
• Mechanical life minimum 1,000,000 cycles
• Electrical life minimum 200,000 cycles
• RoHS3 compliance required

The substitute part PV5S64019G manufactured by E-Switch meets all specified electrical and mechanical parameters. Differences in actuator type classification (Anti-Vandal versus Standard) and operating temperature range do not affect functional equivalence for the defined electrical and mechanical requirements.

Parameter Comparison

Engineering Selection Recommendations

Both MMP0120/ARDS and PV5S64019G are active products with ROHS3 compliance and REACH unaffected status. Selection between these components should be based on:

• Availability and lead time requirements
• Packaging format preference (Tray versus Bulk)
• Inventory levels at point of procurement
• Supplier relationship and pricing structure

The PV5S64019G offers an extended operating temperature range (-20°C to 70°C) compared to the MMP0120/ARDS (-25°C to 55°C), which may provide additional margin for applications operating at elevated ambient temperatures. Both components satisfy identical electrical and mechanical requirements for SPST-NO 2A 36V panel mount applications with 12.00mm cutout diameter and screw terminal termination.

Frequently Asked Questions (FAQ)

Q: Can PV5S64019G be used as a direct replacement for MMP0120/ARDS in existing designs?

A: Yes. Both components meet identical specifications for circuit configuration (SPST-NO), current rating (2A DC), voltage rating (36V), panel cutout diameter (12.00mm), termination style (screw terminal), and ingress protection (IP65). Physical mounting and electrical interface are compatible.

Q: What is the difference between "Standard" and "Anti-Vandal" actuator types?

A: The actuator type classification reflects design robustness features. Both MMP0120/ARDS (Standard) and PV5S64019G (Anti-Vandal) provide identical electrical performance and mechanical life ratings for the specified application parameters.

Q: Does the operating temperature range difference affect substitution eligibility?

A: No. The PV5S64019G operating range (-20°C to 70°C) encompasses the MMP0120/ARDS range (-25°C to 55°C) with additional margin. For applications within the MMP0120/ARDS specified range, both components perform identically.

Q: Are there packaging considerations when switching between these parts?

A: Yes. MMP0120/ARDS is supplied in Tray packaging, while PV5S64019G is supplied in Bulk packaging. Procurement and handling procedures may differ based on packaging format.

Q: Do both parts meet the same compliance standards?

A: Yes. Both MMP0120/ARDS and PV5S64019G are ROHS3 compliant, REACH unaffected, and classified under identical HTSUS and ECCN codes.