MMBTA14LT1 Equivalent & Substitute Parts

Part Overview

The MMBTA14LT1 is a Bipolar (BJT) Transistor NPN - Darlington configuration rated for 30 V collector-emitter breakdown voltage with a maximum collector current of 300 mA. This surface mount device in SOT-23-3 (TO-236) package is designed for small-signal switching and amplification applications requiring high current gain characteristics typical of Darlington pair configurations.

The MMBTA14LT1 carries an Obsolete product status. Locating equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications currently utilizing this component.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN - Darlington	—
Current - Collector (Ic) (Max)	300	mA
Voltage - Collector Emitter Breakdown (Max)	30	V
Vce Saturation (Max) @ Ib, Ic	1.5V @ 100µA, 100mA	—
DC Current Gain (hFE) (Min) @ Ic, Vce	10000 @ 10mA, 5V	—
Power - Max	225	mW
Frequency - Transition	125	MHz
Operating Temperature	-55 to 150	°C (TJ)
Mounting Type	Surface Mount	—
Package / Case	TO-236-3, SC-59, SOT-23-3	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the MMBTA14LT1 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Transistor Type: NPN - Darlington configuration
Voltage - Collector Emitter Breakdown (Max): 30 V minimum
Current - Collector (Ic) (Max): 300 mA minimum
Vce Saturation (Max) @ Ib, Ic: 1.5V @ 100µA, 100mA
Frequency - Transition: 125 MHz minimum
Operating Temperature Range: -55°C to 150°C (TJ)
Mounting Type: Surface Mount
Package / Case: SOT-23-3 (TO-236) compatible

Allowable Variations:

DC Current Gain (hFE) may exceed minimum specification
Power dissipation rating may exceed 225 mW
Maximum collector current may exceed 300 mA
Product Status may differ (Active vs. Obsolete)
RoHS compliance status may differ
Manufacturer and packaging format may differ

Substitute parts are grouped into Direct Manufacturer equivalents (same base part number, different packaging or revision), Upgrade alternatives (enhanced specifications or certifications), and Similar alternatives (different manufacturers with equivalent electrical performance).

Parameter Comparison

Parameter	MMBTA14LT1	MMBTA14LT1G	MMBTA13-7-F	MMBTA14-TP	PMBTA14,215
Manufacturer	onsemi	onsemi	Diodes Incorporated	Micro Commercial Co	NXP Semiconductors
Product Status	Obsolete	Active	Active	Active	Active
Transistor Type	NPN - Darlington	NPN - Darlington	NPN - Darlington	NPN - Darlington	NPN - Darlington
Current - Collector (Ic) (Max)	300 mA	300 mA	300 mA	300 mA	500 mA
Voltage - Collector Emitter Breakdown (Max)	30 V	30 V	30 V	30 V	30 V
Vce Saturation (Max) @ Ib, Ic	1.5V @ 100µA, 100mA	1.5V @ 100µA, 100mA	1.5V @ 100µA, 100mA	1.5V @ 100µA, 100mA	1.5V @ 100µA, 100mA
DC Current Gain (hFE) (Min) @ Ic, Vce	10000 @ 10mA, 5V	20000 @ 100mA, 5V	10000 @ 100mA, 5V	20000 @ 150mA, 1V	20000 @ 100mA, 5V
Power - Max	225 mW	225 mW	300 mW	225 mW	250 mW
Frequency - Transition	125 MHz	125 MHz	125 MHz	125 MHz	125 MHz
Operating Temperature	-55 to 150°C (TJ)	-55 to 150°C (TJ)	-55 to 150°C (TJ)	-55 to 150°C (TJ)	150°C (TJ)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	Not specified
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

MMBTA14LT1G (onsemi)

The MMBTA14LT1G is the direct manufacturer equivalent from onsemi with Active product status. This part maintains identical electrical specifications to the MMBTA14LT1 while offering ROHS3 compliance and higher inventory availability (125,300 pcs). The MMBTA14LT1G is the primary replacement for obsolete MMBTA14LT1 applications requiring continuity with the original onsemi product line.

MMBTA13-7-F (Diodes Incorporated)

The MMBTA13-7-F is an upgrade alternative offering enhanced power dissipation (300 mW vs. 225 mW) and AEC-Q101 automotive qualification. This part is suitable for applications requiring automotive-grade reliability or operating at higher power levels. ROHS3 compliance and Active product status support long-term supply chain stability.

MMBTA14-TP (Micro Commercial Co)

The MMBTA14-TP provides electrical equivalence with Active product status and ROHS3 compliance. This alternative is available from a different manufacturer, offering supply chain diversification. Electrical specifications match the MMBTA14LT1 requirements across all critical parameters.

PMBTA14,215 (NXP Semiconductors)

The PMBTA14,215 is a higher-current alternative rated for 500 mA maximum collector current (vs. 300 mA) with enhanced power dissipation (250 mW). This part includes AEC-Q101 automotive qualification and is suitable for applications requiring increased current handling capability. Operating temperature specification differs (150°C maximum vs. -55 to 150°C range).

Frequently Asked Questions (FAQ)

Q: Can MMBTA14LT1G directly replace MMBTA14LT1 in existing designs?

A: Yes. The MMBTA14LT1G maintains identical electrical specifications including collector current (300 mA), breakdown voltage (30 V), saturation voltage, current gain, and transition frequency. Both devices use SOT-23-3 packaging. The primary difference is product status (Active vs. Obsolete) and RoHS compliance.

Q: What is the difference between MMBTA14LT1 and MMBTA13-7-F?

A: Both are NPN Darlington transistors with 30 V breakdown voltage and 300 mA maximum collector current. The MMBTA13-7-F offers higher power dissipation (300 mW vs. 225 mW) and includes AEC-Q101 automotive qualification. DC current gain specifications differ at different operating points. The MMBTA13-7-F is suitable for automotive applications or designs requiring higher power handling.

Q: Is PMBTA14,215 suitable as a direct replacement?

A: The PMBTA14,215 is electrically compatible with MMBTA14LT1 across critical parameters (30 V breakdown, saturation voltage, transition frequency). However, it is rated for higher maximum collector current (500 mA vs. 300 mA) and has a different operating temperature specification (150°C maximum only, vs. -55 to 150°C range). Use this part only if the higher current rating and modified temperature range are acceptable for the application.

Q: Are all substitute parts available in SOT-23-3 packaging?

A: All substitute parts listed are compatible with SOT-23-3 (TO-236) packaging. Packaging format variations exist (Cut Tape, Tape & Reel, Bulk) but do not affect electrical compatibility or physical footprint on the PCB.

Q: Which substitute part offers the best long-term supply availability?

A: PMBTA14,215 (NXP Semiconductors) has the highest current inventory (99,782 pcs). MMBTA14LT1G (onsemi) offers 125,300 pcs with Active product status. Both parts support long-term design continuity. MMBTA13-7-F and MMBTA14-TP offer lower inventory levels but maintain Active product status.

Q: Do all substitute parts meet RoHS compliance requirements?

A: MMBTA14LT1G, MMBTA13-7-F, and MMBTA14-TP are ROHS3 compliant. The original MMBTA14LT1 is RoHS non-compliant. PMBTA14,215 RoHS status is not specified in available documentation. Verify RoHS compliance requirements for your specific application before selection.

Q: Can MMBTA14-TP be used in automotive applications?

A: MMBTA14-TP does not carry AEC-Q101 automotive qualification. For automotive applications, MMBTA13-7-F or PMBTA14,215 are recommended as both include AEC-Q101 qualification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message