MMBT4401 Equivalent & Substitute Parts

Part Overview

The MMBT4401 is an NPN bipolar junction transistor (BJT) manufactured by Diotec Semiconductor in SOT-23 surface mount packaging. This device operates at 40V collector-emitter breakdown voltage with a maximum collector current of 600 mA and 300 mW power dissipation. The MMBT4401 is classified as an active product with full RoHS3 compliance and is suitable for general-purpose switching and amplification applications in surface mount designs. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to component availability, supply chain considerations, or design flexibility.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN	—
Collector Current (Max)	600	mA
Collector-Emitter Breakdown Voltage (Max)	40	V
Power Dissipation (Max)	300	mW
Transition Frequency	250	MHz
Operating Temperature Range	−55 to 150	°C
Package Type	SOT-23-3 (TO-236)	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of the MMBT4401 is permissible when the alternative part maintains electrical equivalence across the following critical parameters:

Transistor Type: Must be NPN configuration
Collector Current Rating: Minimum 600 mA maximum rating
Collector-Emitter Breakdown Voltage: Minimum 40 V rating
Power Dissipation: Minimum 300 mW rating
Package/Case: SOT-23-3 (TO-236) surface mount form factor
Operating Temperature Range: Must encompass −55°C to 150°C
Compliance Status: RoHS3 compliance required

The MMBT2222A RFG manufactured by Taiwan Semiconductor Corporation satisfies all substitution criteria. Both devices share identical maximum ratings for collector current (600 mA), collector-emitter breakdown voltage (40 V), and power dissipation (300 mW). Both are packaged in SOT-23-3 surface mount configuration and operate across the same temperature range with equivalent RoHS3 compliance.

Parameter Comparison

Parameter	MMBT4401 (Diotec)	MMBT2222A RFG (Taiwan Semiconductor)	Unit
Transistor Type	NPN	NPN	—
Collector Current (Max)	600	600	mA
Collector-Emitter Breakdown Voltage (Max)	40	40	V
Power Dissipation (Max)	300	300	mW
Transition Frequency	250	300	MHz
Operating Temperature Range	−55 to 150	−55 to 150	°C
Package/Case	SOT-23-3 (TO-236)	SOT-23-3 (TO-236)	—
Mounting Type	Surface Mount	Surface Mount	—
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	—

Engineering Selection Recommendations

The MMBT2222A RFG is a direct electrical and mechanical equivalent to the MMBT4401. Both devices meet identical maximum ratings for current, voltage, and power dissipation. Both are manufactured to RoHS3 compliance standards and operate across the full −55°C to 150°C temperature range. The MMBT2222A RFG exhibits a higher transition frequency (300 MHz versus 250 MHz), which provides additional performance margin in high-frequency switching applications. Both devices are classified as active products with current manufacturing status. Selection between these parts may be based on supply availability, packaging format preference (Cut Tape versus Tape & Reel), or manufacturer preference, as electrical performance and mechanical compatibility are equivalent.

Frequently Asked Questions (FAQ)

Q: Can the MMBT2222A RFG be used as a direct replacement for the MMBT4401 in existing designs?

A: Yes. Both devices share identical maximum ratings for collector current (600 mA), collector-emitter breakdown voltage (40 V), and power dissipation (300 mW). Both are packaged in SOT-23-3 surface mount configuration with identical pinout and footprint. Electrical performance is equivalent within the specified operating parameters.

Q: What are the differences between these two parts?

A: The primary differences are manufacturer (Diotec Semiconductor versus Taiwan Semiconductor Corporation) and transition frequency (250 MHz versus 300 MHz). The MMBT2222A RFG operates at a higher transition frequency, which may provide improved performance in high-frequency applications. Packaging format differs (Cut Tape & Digi-Reel versus Tape & Reel), but the physical package remains SOT-23-3.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the MMBT4401 and MMBT2222A RFG are RoHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Do these parts have the same operating temperature range?

A: Yes. Both devices operate across the identical temperature range of −55°C to 150°C junction temperature, ensuring compatibility in applications requiring extended temperature performance.

Q: What is the significance of the higher transition frequency in the MMBT2222A RFG?

A: The MMBT2222A RFG operates at 300 MHz compared to 250 MHz for the MMBT4401. This higher transition frequency indicates faster switching capability and may provide improved performance in high-frequency switching or amplification circuits. However, both devices are suitable for general-purpose applications within their specified frequency ranges.

Q: Can these parts be used interchangeably in PCB designs?

A: Yes. Both devices use the SOT-23-3 (TO-236) surface mount package with identical pinout and footprint. PCB layouts designed for either part accommodate the other without modification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message