MMBT4401 Equivalent & Substitute Parts

Part Overview

The MMBT4401 is an NPN bipolar junction transistor (BJT) in SOT-23-3 surface mount packaging, rated for 40 V collector-emitter breakdown voltage and 600 mA maximum collector current. Manufactured by onsemi, this component is classified as obsolete product status. Due to its obsolete designation, equivalent and substitute parts with active product status are necessary for new designs and ongoing production requirements. Substitute parts maintain electrical and mechanical compatibility while offering active availability and current manufacturing support.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN	—
Voltage - Collector Emitter Breakdown (Max)	40	V
Current - Collector (Ic) (Max)	600	mA
Power - Max	300	mW
Frequency - Transition	250	MHz
Operating Temperature Range	-55 to 150	°C
Package / Case	SOT-23-3 (TO-236)	—
Mounting Type	Surface Mount	—

Substitute Part Grouping Explanation

Substitute parts for the MMBT4401 are classified into two categories based on electrical parameter alignment:

Direct Equivalents maintain all critical electrical parameters: 40 V collector-emitter breakdown voltage, 600 mA maximum collector current, 300 mW power dissipation, 250 MHz transition frequency, and identical SOT-23-3 packaging. These parts are functionally interchangeable with the original MMBT4401 and differ only in manufacturing source, packaging format (Cut Tape vs. Tape & Reel), or minor suffix designations indicating product line variants.

Similar Alternatives share the same package, mounting type, and operating temperature range but deviate in one or more electrical parameters. These parts are suitable for applications where the specific parameter deviation does not impact circuit performance. Parameter deviations include reduced maximum collector current (200 mA vs. 600 mA), reduced maximum voltage rating (30 V vs. 40 V), increased transition frequency (300 MHz or 700 MHz vs. 250 MHz), or reduced power dissipation (225 mW vs. 300 mW).

Substitution eligibility is determined by:

Collector-emitter breakdown voltage equal to or greater than 40 V
Maximum collector current equal to or greater than 600 mA
Maximum power dissipation equal to or greater than 300 mW
Transition frequency equal to or greater than 250 MHz
Identical SOT-23-3 package and surface mount configuration
Operating temperature range encompassing -55°C to 150°C

Parameter Comparison

Part Number	Manufacturer	Product Status	Vce Breakdown (V)	Ic Max (mA)	Power Max (mW)	Frequency (MHz)	Package	RoHS / Compliance
MMBT4401	onsemi	Obsolete	40	600	300	250	SOT-23-3	REACH Unaffected
MMBT4401LT1G	onsemi	Active	40	600	300	250	SOT-23-3	ROHS3 / REACH Unaffected
MMBT4401LT3G	onsemi	Active	40	600	300	250	SOT-23-3	ROHS3 / REACH Unaffected
SMMBT4401LT1G	onsemi	Active	40	600	300	250	SOT-23-3	ROHS3 / REACH Unaffected
MMBT4401-7-F	Diodes Incorporated	Active	40	600	310	250	SOT-23-3	ROHS3 / AEC-Q101 / REACH Unaffected
MMBT4401Q-13-F	Diodes Incorporated	Active	40	600	310	250	SOT-23-3	ROHS3 / AEC-Q101 / REACH Unaffected
MMBT2222LT1G	onsemi	Active	30	600	300	250	SOT-23-3	ROHS3 / REACH Unaffected
MMBT6429LT1G	onsemi	Active	45	200	225	700	SOT-23-3	ROHS3 / REACH Unaffected
SMMBT2222ALT1G	onsemi	Active	40	600	225	300	SOT-23-3	ROHS3 / AEC-Q101 / REACH Unaffected
SMMBT2222ALT3G	onsemi	Active	40	600	300	300	SOT-23-3	ROHS3 / REACH Unaffected
SMMBT3904LT3G	onsemi	Active	40	200	300	300	SOT-23-3	ROHS3 / AEC-Q101 / REACH Unaffected

Engineering Selection Recommendations

Direct Equivalent Selection (Preferred for Drop-In Replacement)

MMBT4401LT1G, MMBT4401LT3G, and SMMBT4401LT1G are direct electrical equivalents manufactured by onsemi with active product status. These parts maintain identical electrical specifications and SOT-23-3 packaging. Selection between these three variants depends on packaging format requirements: MMBT4401LT1G and MMBT4401LT3G are supplied in Cut Tape & Digi-Reel format, while SMMBT4401LT1G is supplied in Tape & Reel format. All three carry ROHS3 compliance and unlimited moisture sensitivity level (MSL 1).

MMBT4401-7-F and MMBT4401Q-13-F, manufactured by Diodes Incorporated, provide direct electrical equivalence with active product status and AEC-Q101 automotive qualification. These parts are suitable for applications requiring automotive-grade components. MMBT4401-7-F offers higher power dissipation rating (310 mW vs. 300 mW) and is available in Cut Tape & Digi-Reel packaging. MMBT4401Q-13-F is supplied in Tape & Reel format with limited inventory (716 pcs).

Similar Alternative Selection (Parameter-Dependent Applications)

SMMBT2222ALT3G maintains 40 V breakdown voltage and 600 mA collector current with identical 300 mW power dissipation but offers increased transition frequency (300 MHz vs. 250 MHz). This part is suitable for applications where higher frequency performance is beneficial or neutral.

MMBT2222LT1G operates at reduced breakdown voltage (30 V vs. 40 V) with maintained 600 mA collector current. This part is suitable only for applications where the circuit operates below 30 V.

MMBT6429LT1G and SMMBT3904LT3G are suitable only for low-current applications requiring maximum 200 mA collector current, as they do not meet the 600 mA specification of the original MMBT4401.

Frequently Asked Questions (FAQ)

Q: Can MMBT4401LT1G directly replace the obsolete MMBT4401?

A: Yes. MMBT4401LT1G is a direct electrical equivalent with identical 40 V breakdown voltage, 600 mA maximum collector current, 300 mW power dissipation, and 250 MHz transition frequency. The primary difference is active product status and ROHS3 compliance. Packaging format differs (Cut Tape & Digi-Reel vs. unspecified original format), but electrical performance is identical.

Q: What is the difference between MMBT4401LT1G and MMBT4401LT3G?

A: Both parts are manufactured by onsemi with identical electrical specifications. The suffix designations (LT1G vs. LT3G) indicate different manufacturing batches or product line variants. Electrical parameters, package type, and compliance certifications are equivalent. Selection between these variants depends on inventory availability and supplier preference.

Q: Why would I select MMBT4401-7-F over onsemi equivalents?

A: MMBT4401-7-F, manufactured by Diodes Incorporated, provides AEC-Q101 automotive qualification and slightly higher power dissipation rating (310 mW vs. 300 mW). Selection of this part is appropriate for automotive applications requiring qualified components or when Diodes Incorporated is the preferred supplier.

Q: Can MMBT2222LT1G replace MMBT4401 in all applications?

A: No. MMBT2222LT1G operates at 30 V maximum breakdown voltage compared to 40 V for MMBT4401. This part is suitable only for circuits operating below 30 V. All other electrical parameters (600 mA collector current, 300 mW power, 250 MHz frequency) are maintained.

Q: What is the difference between Cut Tape & Digi-Reel and Tape & Reel packaging?

A: Both are surface mount delivery formats for automated assembly. Cut Tape & Digi-Reel format provides flexibility for smaller production runs and manual handling. Tape & Reel format is optimized for high-volume automated assembly. Electrical specifications and component performance are identical; selection depends on manufacturing process requirements.

Q: Are all substitute parts ROHS3 compliant?

A: All active substitute parts listed (MMBT4401LT1G, MMBT4401LT3G, SMMBT4401LT1G, MMBT4401-7-F, MMBT4401Q-13-F, and similar alternatives) carry ROHS3 compliance. The original obsolete MMBT4401 is listed as REACH Unaffected. All substitutes maintain REACH Unaffected status.

Q: Can SMMBT3904LT3G or MMBT6429LT1G replace MMBT4401?

A: No. Both parts are limited to 200 mA maximum collector current, which does not meet the 600 mA specification of MMBT4401. These parts are suitable only for applications requiring maximum 200 mA collector current. Voltage ratings and power dissipation differ as well.

Q: What does AEC-Q101 qualification mean?

A: AEC-Q101 is an automotive electronics qualification standard. Parts carrying this certification (MMBT4401-7-F, MMBT4401Q-13-F, SMMBT2222ALT1G, SMMBT3904LT3G) have undergone additional testing and validation for automotive applications. Selection of AEC-Q101 qualified parts is required for automotive designs.

Q: Is SMMBT4401LT1G different from MMBT4401LT1G?

A: The "S" prefix in SMMBT4401LT1G indicates a Tape & Reel packaging format, while MMBT4401LT1G uses Cut Tape & Digi-Reel format. Electrical specifications are identical. Selection depends on assembly equipment and production volume requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message