MMBT3906 Equivalent & Substitute Parts

Part Overview

The MMBT3906 is a surface-mount PNP bipolar junction transistor manufactured by onsemi in the SOT-23-3 package. This small-signal transistor is designed for general-purpose switching and amplification applications with a maximum collector current of 200 mA and collector-emitter breakdown voltage of 40 V. The original MMBT3906 part is classified as obsolete; however, direct equivalents and substitutes remain available from multiple manufacturers in active production status. Identifying suitable alternatives is necessary to ensure design continuity and maintain supply chain reliability for new production builds and legacy system support.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Current - Collector (Ic) Max	200	mA
Voltage - Collector Emitter Breakdown (Max)	40	V
DC Current Gain (hFE) Min @ Ic, Vce	100 @ 10mA, 1V	—
Power - Max	200	mW
Frequency - Transition	300	MHz
Operating Temperature Range	-55 to 150	°C
Package / Case	SOT-23-3 (TO-236)	—
Mounting Type	Surface Mount	—

Substitute Part Grouping Explanation

Substitution of the MMBT3906 is determined by strict electrical and mechanical parameter matching within the PNP small-signal transistor category. The critical parameters that define substitutability are:

Electrical Parameters:

Transistor polarity (PNP)
Maximum collector current (200 mA)
Collector-emitter breakdown voltage (40 V)
DC current gain minimum specification (100 @ 10mA, 1V)
Operating temperature range (-55°C to 150°C or wider)

Mechanical Parameters:

Package type (SOT-23-3 / TO-236-3 / SC-59)
Surface mount configuration
Pin-to-pin compatibility

Compliance Parameters:

RoHS status (ROHS3 Compliant preferred for new designs)
Moisture sensitivity level (MSL 1 - Unlimited)
Product status (Active preferred over Obsolete)

Substitute parts are grouped into two categories: Direct Equivalents (identical base part numbers from different manufacturers or packaging variants) and Similar Parts (alternative manufacturers meeting all electrical and mechanical requirements). Parts with higher power ratings, higher transition frequencies, or automotive-grade qualifications are listed as direct equivalents when all core electrical parameters align.

Parameter Comparison

Part Number	Manufacturer	Ic Max (mA)	Vce Breakdown (V)	hFE Min @ 10mA, 1V	Power Max (mW)	Freq - Transition (MHz)	Temp Range (°C)	Package	Product Status	RoHS
MMBT3906	onsemi	200	40	100	200	300	-55 to 150	SOT-23-3	Obsolete	Not Applicable
MMBT3906LT1G	onsemi	200	40	100	300	250	-55 to 150	SOT-23-3	Active	ROHS3
MMBT3906LT3G	onsemi	200	40	100	300	250	-55 to 150	SOT-23-3	Active	ROHS3
SMMBT3906LT3G	onsemi	200	40	100	300	250	-55 to 150	SOT-23-3	Active	ROHS3
SMMBT3906LT1G	onsemi	200	40	100	300	250	-55 to 150	SOT-23-3	Active	ROHS3
CMPT3906G TR PBFREE	Central Semiconductor Corp	200	40	100	350	250	-65 to 150	SOT-23-3	Active	ROHS3
MMBT3906,215	NXP Semiconductors	200	40	100	250	250	-55 to 150	SOT-23-3	Active	Not Specified
MMBT3906-7-F	Diodes Incorporated	200	40	100	300	250	-55 to 150	SOT-23-3	Active	ROHS3
MMBT3906-G	onsemi	200	40	100	200	300	-55 to 150	SOT-23-3	Obsolete	Not Applicable
MMBT3906-HF	Comchip Technology	200	40	100	300	250	-55 to 150	SOT-23-3	Active	ROHS3
PMBT3906,235	NXP Semiconductors	200	40	100	250	250	-55 to 150	SOT-23-3	Active	Not Specified

Engineering Selection Recommendations

Primary Substitutes (Recommended for New Designs):

The following parts are recommended as direct replacements for the obsolete MMBT3906 due to active product status, full RoHS3 compliance, and identical electrical specifications:

MMBT3906LT1G (onsemi): Active status, ROHS3 compliant, 300 mW power rating, available in Cut Tape and Digi-Reel packaging
MMBT3906LT3G (onsemi): Active status, ROHS3 compliant, 300 mW power rating, available in Cut Tape and Digi-Reel packaging
MMBT3906-7-F (Diodes Incorporated): Active status, ROHS3 compliant, AEC-Q101 automotive qualified, 300 mW power rating
MMBT3906-HF (Comchip Technology): Active status, ROHS3 compliant, 300 mW power rating, available in Tape & Reel packaging

Automotive-Grade Alternatives:

For applications requiring automotive qualification:

SMMBT3906LT3G (onsemi): AEC-Q101 qualified, active status, ROHS3 compliant, Tape & Reel packaging
SMMBT3906LT1G (onsemi): AEC-Q101 qualified, active status, ROHS3 compliant, Tape & Reel packaging, highest inventory availability (95,300 pcs)

Extended Temperature Range Option:

CMPT3906G TR PBFREE (Central Semiconductor Corp): Operating range -65°C to 150°C (5°C lower minimum), 350 mW power rating, active status, ROHS3 compliant

Secondary Alternatives (Legacy Support):

MMBT3906,215 (NXP Semiconductors): Active status, AEC-Q101 automotive qualified, 250 mW power rating
PMBT3906,235 (NXP Semiconductors): Active status, AEC-Q101 automotive qualified, 250 mW power rating, highest inventory availability among NXP variants (158,765 pcs)

Parts to Avoid:

MMBT3906-G (onsemi): Obsolete status; use only for legacy system repairs where original part specifications are mandatory

Frequently Asked Questions (FAQ)

Q: Can I substitute MMBT3906LT1G for the original MMBT3906 without circuit modification?

A: Yes. The MMBT3906LT1G meets all electrical specifications of the original MMBT3906 (200 mA collector current, 40 V breakdown voltage, 100 hFE minimum, SOT-23-3 package). The higher power rating (300 mW vs. 200 mW) and lower transition frequency (250 MHz vs. 300 MHz) do not create compatibility issues in standard switching and amplification circuits. Pin-to-pin compatibility is identical.

Q: What is the difference between MMBT3906LT1G and MMBT3906LT3G?

A: Both parts are electrically identical and meet the same specifications. The difference lies in packaging and tape configuration. MMBT3906LT1G and MMBT3906LT3G are both available in Cut Tape and Digi-Reel formats from onsemi. Inventory levels differ (608,935 pcs vs. 1,121 pcs). Selection should be based on procurement packaging requirements and lead time availability.

Q: Are automotive-grade SMMBT3906 variants suitable for non-automotive applications?

A: Yes. Automotive-grade parts (SMMBT3906LT1G and SMMBT3906LT3G) meet AEC-Q101 qualification and ROHS3 compliance, making them suitable for any application requiring the MMBT3906 electrical specifications. The automotive qualification represents additional quality and reliability screening and does not restrict use in non-automotive designs. These parts are preferred for high-reliability applications.

Q: What is the significance of the extended temperature range in CMPT3906G?

A: The CMPT3906G operates from -65°C to 150°C, compared to -55°C to 150°C for standard variants. This 10°C lower minimum operating temperature provides additional margin for applications exposed to extreme cold environments. The 350 mW power rating also exceeds the original 200 mW specification. Use this part only if the extended low-temperature range is required; otherwise, standard variants are sufficient.

Q: Can I use NXP MMBT3906,215 or PMBT3906,235 as direct replacements?

A: Yes. Both NXP parts meet the core electrical specifications (200 mA, 40 V, 100 hFE minimum, SOT-23-3 package) and are AEC-Q101 automotive qualified. The 250 mW power rating is lower than the original 200 mW specification but remains adequate for standard small-signal applications. These parts are active and widely available. PMBT3906,235 has significantly higher inventory (158,765 pcs).

Q: What packaging options are available for MMBT3906 substitutes?

A: Substitute parts are available in three packaging formats: Cut Tape (CT) & Digi-Reel (standard for MMBT3906LT1G and MMBT3906LT3G), Tape & Reel (TR) (standard for SMMBT3906 variants), and Bulk (for PMBT3906,235 and MMBT3906,215). Selection depends on production volume and assembly equipment compatibility. Tape & Reel is standard for high-volume surface-mount assembly; Cut Tape and Digi-Reel are suitable for lower volumes and prototyping.

Q: Is RoHS3 compliance mandatory for my application?

A: RoHS3 compliance is mandatory for products sold in the European Union and many other regulated markets. All recommended active substitutes (MMBT3906LT1G, MMBT3906LT3G, SMMBT3906LT1G, SMMBT3906LT3G, MMBT3906-7-F, MMBT3906-HF, CMPT3906G) are ROHS3 compliant. NXP variants (MMBT3906,215 and PMBT3906,235) do not specify RoHS status in the provided data; verify compliance with the manufacturer before use in regulated applications.

Q: Which substitute offers the best inventory availability?

A: SMMBT3906LT1G (onsemi) has the highest inventory availability at 95,300 pcs, followed by PMBT3906,235 (NXP) at 158,765 pcs. For immediate procurement, MMBT3906-7-F (Diodes Incorporated) offers 146,126 pcs. Inventory levels are subject to change; consult current distributor stock for real-time availability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message