MMBT200 Equivalent & Substitute Parts

Part Overview

The MMBT200 is a Surface Mount PNP Bipolar Junction Transistor manufactured by onsemi, housed in a SOT-23-3 package. This component is rated for 45 V collector-emitter breakdown voltage and 500 mA maximum collector current, with a maximum power dissipation of 350 mW. The MMBT200 is classified as obsolete, necessitating identification of active equivalent and substitute parts for new designs and ongoing production requirements. Substitute parts must maintain electrical compatibility within the specified parameter ranges while offering active product status and continued availability.

Key Parameters

Parameter	MMBT200 Specification
Transistor Type	PNP
Collector Current (Ic) Max	500 mA
Collector-Emitter Breakdown Voltage (Max)	45 V
Vce Saturation (Max)	400 mV @ 20 mA, 200 mA
Collector Cutoff Current (Max)	50 nA
DC Current Gain (hFE) Min	100 @ 150 mA, 5 V
Power Dissipation (Max)	350 mW
Transition Frequency	250 MHz
Operating Temperature Range	-55°C to 150°C (TJ)
Package / Case	SOT-23-3 (TO-236-3, SC-59)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the MMBT200 is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Transistor Type: PNP (mandatory)
Package: SOT-23-3 surface mount (mandatory for mechanical compatibility)
Collector Current (Ic) Max: 500 mA (minimum requirement)
Collector-Emitter Breakdown Voltage: 45 V or greater
Operating Temperature Range: -55°C to 150°C (minimum requirement)
RoHS3 Compliance and MSL 1 rating (environmental and handling compatibility)

Secondary Compatibility Parameters:

DC Current Gain (hFE): Minimum 100 at specified conditions
Power Dissipation: 300 mW or greater
Vce Saturation characteristics within acceptable switching performance ranges

Substitute parts are grouped into two categories based on product status and application suitability:

Category A - Standard Industrial Grade: BC807 series variants (BC807-25LT1G, BC807-25LT3G, BC807-40LT1G, BC807-40LT3G) and BCX17LT1G. These parts maintain identical electrical specifications to MMBT200 within the defined parameter envelope and are suitable for general industrial applications.

Category B - Automotive Grade: SBC807 series variants (SBC807-25LT1G, SBC807-25LT3G, SBC807-40LT1G) and NSVBCX17LT1G. These parts carry AEC-Q101 qualification and automotive-grade designation, providing enhanced reliability for automotive and mission-critical applications.

Category C - Enhanced Performance: 50A02CH-TL-E offers higher collector-emitter breakdown voltage (50 V) and superior frequency response (690 MHz), suitable for applications requiring extended voltage margins or higher-frequency operation.

Parameter Comparison

Part Number	Manufacturer	Product Status	Ic Max (mA)	Vce Breakdown (V)	Power Max (mW)	Frequency (MHz)	hFE Min	Temp Range (°C)	Grade	Inventory
MMBT200	onsemi	Obsolete	500	45	350	250	100	-55 to 150	Standard	123,791
BC807-25LT1G	onsemi	Active	500	45	300	100	160	-55 to 150	Standard	293,400
BC807-25LT3G	onsemi	Active	500	45	300	100	160	-55 to 150	Standard	305,300
BC807-40LT1G	onsemi	Active	500	45	300	100	250	-55 to 150	Standard	119,400
BC807-40LT3G	onsemi	Active	500	45	300	100	250	-55 to 150	Standard	95,300
BCX17LT1G	onsemi	Active	500	45	300	—	100	-55 to 150	Standard	293,100
NSVBCX17LT1G	onsemi	Active	500	45	225	—	100	-55 to 150	Automotive	1,336
SBC807-25LT1G	onsemi	Active	500	45	300	100	160	-55 to 150	Automotive	363,350
SBC807-25LT3G	onsemi	Active	500	45	300	100	160	-55 to 150	Automotive	6,881
SBC807-40LT1G	onsemi	Active	500	45	300	100	250	-55 to 150	Automotive	35,300
50A02CH-TL-E	onsemi	Active	500	50	700	690	200	-55 to 150	Standard	4,490

Engineering Selection Recommendations

For Direct Replacement (Obsolete to Active Transition):

The BC807-25LT1G and BC807-25LT3G are direct functional equivalents to the MMBT200. Both parts maintain identical electrical specifications within the critical parameter envelope: 500 mA collector current, 45 V breakdown voltage, and -55°C to 150°C operating temperature range. These parts are in active production status with substantial inventory availability (293,400 and 305,300 units respectively), ensuring long-term supply continuity. Both are ROHS3 compliant with MSL 1 rating, matching the environmental compliance profile of the MMBT200.

For Enhanced Current Gain Applications:

The BC807-40LT1G and BC807-40LT3G variants provide a minimum DC current gain (hFE) of 250 at 100 mA, compared to 160 for the BC807-25 series. These parts are suitable for applications requiring higher current amplification while maintaining all other electrical parameters identical to the MMBT200. Active production status and adequate inventory (119,400 and 95,300 units) support production deployment.

For Automotive and Mission-Critical Applications:

The SBC807-25LT1G and SBC807-40LT1G are automotive-grade equivalents carrying AEC-Q101 qualification. These parts are required for automotive applications, industrial control systems, and other mission-critical environments where enhanced reliability and traceability are mandated. The SBC807-25LT1G offers the highest inventory availability among automotive-qualified options (363,350 units).

For Extended Voltage Margin Applications:

The 50A02CH-TL-E provides 50 V collector-emitter breakdown voltage (compared to 45 V for MMBT200) and significantly enhanced power dissipation capability (700 mW versus 350 mW). This part is suitable for applications requiring additional voltage headroom or higher power handling. The transition frequency of 690 MHz supports higher-frequency switching applications. Limited inventory (4,490 units) requires early procurement planning.

For Low-Power Automotive Applications:

The NSVBCX17LT1G is an automotive-qualified alternative with reduced power dissipation (225 mW) suitable for battery-powered automotive systems and low-power switching applications. AEC-Q101 qualification ensures automotive reliability standards. Inventory availability is limited (1,336 units).

Frequently Asked Questions (FAQ)

Q: Can BC807-25LT1G directly replace MMBT200 in existing designs?

A: Yes. The BC807-25LT1G maintains electrical compatibility across all critical parameters: 500 mA collector current, 45 V breakdown voltage, SOT-23-3 package, and -55°C to 150°C operating temperature range. Both parts are ROHS3 compliant with MSL 1 rating. The primary difference is product status (BC807-25LT1G is active; MMBT200 is obsolete). No circuit modifications are required.

Q: What is the difference between BC807-25 and BC807-40 variants?

A: The primary difference is DC current gain (hFE). BC807-25 variants specify minimum hFE of 160 at 100 mA, 1 V. BC807-40 variants specify minimum hFE of 250 at the same conditions. All other electrical parameters remain identical. Selection depends on circuit bias requirements and desired amplification characteristics.

Q: Are LT1G and LT3G packaging designations interchangeable?

A: Both LT1G and LT3G variants are supplied in SOT-23-3 surface mount packages with identical electrical specifications. The designations refer to different tape and reel configurations (Cut Tape & Digi-Reel for LT1G; Cut Tape & Digi-Reel for LT3G). From an electrical and mechanical standpoint, they are interchangeable. Selection is based on procurement and assembly line requirements.

Q: When should automotive-grade SBC807 parts be used instead of standard BC807?

A: Automotive-grade SBC807 parts carrying AEC-Q101 qualification must be used for automotive applications, including engine control modules, body electronics, and safety-critical systems. These parts undergo enhanced qualification testing and traceability requirements mandated by automotive industry standards. Standard BC807 parts are suitable for industrial, consumer, and non-automotive applications.

Q: Does the 50A02CH-TL-E offer backward compatibility with MMBT200?

A: The 50A02CH-TL-E is electrically compatible with MMBT200 within the critical parameter envelope (500 mA collector current, 45 V minimum breakdown voltage, SOT-23-3 package). However, this part offers enhanced specifications: 50 V breakdown voltage, 700 mW power dissipation, and 690 MHz transition frequency. These enhancements provide additional design margin but do not compromise compatibility with circuits designed for MMBT200 specifications.

Q: What is the significance of the 250 mW power dissipation difference between MMBT200 (350 mW) and BC807 variants (300 mW)?

A: The MMBT200 specifies 350 mW maximum power dissipation, while BC807 variants specify 300 mW. For applications operating near the thermal limits of the MMBT200, the reduced power rating of BC807 variants may require thermal analysis. However, for typical switching and amplification applications operating well below maximum power dissipation, this difference is not operationally significant. The 50A02CH-TL-E with 700 mW rating provides additional thermal margin for power-intensive applications.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed (BC807 series, BCX17 series, SBC807 series, and 50A02CH-TL-E) are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the environmental compliance profile of the MMBT200.

Q: What inventory considerations should guide part selection?

A: SBC807-25LT1G offers the highest inventory availability (363,350 units) among automotive-qualified options. BC807-25LT3G and BC807-25LT1G provide substantial industrial-grade inventory (305,300 and 293,400 units respectively). The 50A02CH-TL-E has limited availability (4,490 units), requiring early procurement for high-volume applications. NSVBCX17LT1G has the lowest inventory (1,336 units) and should be reserved for applications specifically requiring automotive qualification with reduced power dissipation.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message