MMASH105SB7102MFCA01 Equivalent & Substitute Parts

Part Overview

The MMASH105SB7102MFCA01 is a 1000 pF ceramic capacitor manufactured by Taiyo Yuden, rated for 100V with X7R temperature coefficient in 0402 (1005 Metric) surface mount package. This component is classified as Active product status and is suitable for medical and non-critical applications. The part is RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same package footprint and performance specifications. Alternative components may be required due to inventory availability, supply chain considerations, or design phase transitions.

Substiute Parts

MMASH105SB7102MFCA01

Taiyo YudenIn Stock: 729MMASH105SB7102MFCA01 Datasheet

Current PartRFQ

HMK105B7102MV-F

Taiyo YudenIn Stock: 9996HMK105B7102MV-F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MMASH105SB7102MFCA01 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance value: 1000 pF
• Tolerance: ±20%
• Voltage rating: 100V
• Temperature coefficient: X7R
• Operating temperature range: -55°C ~ 125°C

Mechanical Parameters:

• Package type: 0402 (1005 Metric)
• Mounting type: Surface Mount, MLCC
• Physical dimensions: 0.039" L x 0.020" W (1.00mm x 0.50mm)
• Maximum thickness: 0.022" (0.55mm)

Compliance Parameters:

• RoHS3 compliance
• MSL rating: 1 (Unlimited)
• ECCN classification: EAR99
• HTSUS code: 8532.24.0020

All substitute parts must maintain identical values across these parameters to ensure direct interchangeability in circuit design and PCB assembly without modification.

Parameter Comparison

Engineering Selection Recommendations

MMASH105SB7102MFCA01 (Primary Selection)

The MMASH105SB7102MFCA01 maintains Active product status and is the recommended selection for new designs. This part is actively manufactured and supported by Taiyo Yuden. Current inventory of 638 pieces is available. The component is RoHS3 compliant and carries MSL 1 rating, suitable for medical and non-critical applications.

HMK105B7102MV-F (Substitute Selection)

The HMK105B7102MV-F is electrically and mechanically equivalent to the primary part, with all critical parameters matching exactly. However, this part carries "Not For New Designs" product status, indicating it is in a mature or transitional phase of its lifecycle. This substitute is appropriate for legacy system maintenance, repair operations, or continuation of existing production runs where design changes are not feasible. Current inventory of 9969 pieces is available. The component maintains identical RoHS3 compliance and MSL 1 rating.

Both parts are manufactured by Taiyo Yuden and share identical electrical specifications, package dimensions, and compliance certifications. Selection between these parts depends on design phase requirements and product lifecycle considerations.

Frequently Asked Questions (FAQ)

Q: Can HMK105B7102MV-F be used as a direct replacement for MMASH105SB7102MFCA01?

A: Yes. Both parts are electrically and mechanically equivalent with identical capacitance (1000 pF), voltage rating (100V), temperature coefficient (X7R), operating temperature range (-55°C ~ 125°C), and 0402 package dimensions. They are interchangeable at the circuit level without modification.

Q: What is the significance of "Not For New Designs" status on the HMK105B7102MV-F?

A: This designation indicates the part is in a mature lifecycle phase and Taiyo Yuden does not recommend its use in new product designs. The part remains available for existing applications and legacy system support. For new designs, the MMASH105SB7102MFCA01 with Active status is the appropriate selection.

Q: Are there any compliance differences between these parts?

A: No. Both parts are RoHS3 compliant, carry MSL 1 (Unlimited) moisture sensitivity rating, share the same ECCN (EAR99) classification, and identical HTSUS code (8532.24.0020).

Q: Do these parts have identical physical dimensions?

A: Yes. Both parts are packaged in 0402 (1005 Metric) with dimensions of 0.039" L x 0.020" W (1.00mm x 0.50mm) and maximum thickness of 0.022" (0.55mm). They are footprint-compatible on PCB layouts.

Q: What applications are these parts suitable for?

A: The MMASH105SB7102MFCA01 is specified for medical and non-critical applications. The HMK105B7102MV-F is specified for SMPS filtering applications. Both parts maintain the same electrical performance across their rated operating parameters.

Q: Are both parts available in Tape & Reel packaging?

A: Yes. Both MMASH105SB7102MFCA01 and HMK105B7102MV-F are supplied in Tape & Reel (TR) packaging suitable for automated assembly processes.