MMA5112NPIKWR2 Equivalent & Substitute Parts

Part Overview

The MMA5112NPIKWR2 is a surface-mount accelerometer sensor manufactured by NXP USA Inc., designed for PSI5 interface applications in 16-QFN (6x6) packaging. This part is classified as obsolete. Locating equivalent or substitute components is necessary due to discontinued production status and the need for continued system support and new design implementations.

Substiute Parts

MMA5112NPIKWR2

NXP USA Inc.In Stock: 884MMA5112NPIKWR2 Datasheet

Current PartRFQ

MMA5112NPIKGCWR2

NXP USA Inc.In Stock: 940MMA5112NPIKGCWR2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MMA5112NPIKWR2 is determined by the following parameters:

• Manufacturer: NXP USA Inc.
• Package / Case: 16-QFN Exposed Pad
• Supplier Device Package: 16-QFN (6x6)
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 3 (168 Hours)
• REACH Status: REACH Unaffected
• ECCN: EAR99
• HTSUS Code: 8542.39.0001

The substitute part MMA5112NPIKGCWR2 meets all these criteria, ensuring mechanical and electrical compatibility for direct replacement in existing designs and new applications.

Parameter Comparison

Engineering Selection Recommendations

The MMA5112NPIKGCWR2 is the manufacturer-recommended substitute for the obsolete MMA5112NPIKWR2. Both parts share identical mechanical packaging, electrical compliance certifications, and regulatory classifications. The substitute part carries Active product status, ensuring ongoing manufacturer support and availability for production applications. Both components maintain ROHS3 compliance and REACH unaffected status, meeting current environmental and regulatory requirements. Selection of the active substitute part is appropriate for new designs and ongoing production support where the obsolete part is no longer available.

Frequently Asked Questions (FAQ)

Q: Can MMA5112NPIKGCWR2 be used as a direct replacement for MMA5112NPIKWR2?

A: Yes. Both parts share identical package specifications (16-QFN Exposed Pad, 6x6 mm), mounting type (Surface Mount), and all regulatory compliance parameters. Direct substitution is supported at the mechanical and electrical interface level.

Q: What is the difference between these two part numbers?

A: The primary difference is product status. MMA5112NPIKWR2 is obsolete, while MMA5112NPIKGCWR2 is active. Both parts are manufactured by NXP USA Inc. and meet identical specifications for packaging, compliance, and handling requirements.

Q: Are there any PCB layout or design changes required when switching to the substitute part?

A: No design changes are required. Both parts use the same 16-QFN (6x6) package with exposed pad, ensuring footprint compatibility and identical pin assignments.

Q: What is the Moisture Sensitivity Level (MSL) for these parts?

A: Both parts carry MSL 3 rating with a 168-hour floor life. Standard moisture control procedures for MSL 3 components apply to both the main part and substitute.

Q: Are both parts RoHS compliant?

A: Yes. Both MMA5112NPIKWR2 and MMA5112NPIKGCWR2 are ROHS3 compliant and REACH unaffected, meeting current environmental regulations.