Equivalent & Substitute Parts for MMA02040C6201FB000

Part Overview

The MMA02040C6201FB000 is a 6.2 kOhms ±1% thin film chip resistor in MELF 0204 package format, rated for 0.4W/2/5W power dissipation. This component is part of Vishay Beyschlag/Draloric/BC Components' MMA Professional series and meets automotive AEC-Q200 qualification standards with anti-sulfur coating. The part is currently active in production with robust inventory availability. Substitute parts are identified based on matching electrical specifications, mechanical dimensions, package type, and compliance certifications to ensure direct interchangeability in circuit applications.

Substiute Parts

MMA02040C6201FB000

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1083MMA02040C6201FB000 Datasheet

Current PartRFQ

MMA02040C6201FB300

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 5719MMA02040C6201FB300 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MMA02040C6201FB000 is determined by strict equivalence across the following critical parameters:

• Resistance value: 6.2 kOhms
• Tolerance: ±1%
• Power rating: 0.4W, 2/5W
• Package format: MELF, 0204
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -55°C to 155°C
• Composition: Thin Film
• Automotive qualification: AEC-Q200
• Anti-sulfur coating requirement
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

The identified substitute part MMA02040C6201FB300 matches all specified parameters and maintains identical electrical and mechanical characteristics, enabling direct replacement without circuit redesign or performance degradation.

Parameter Comparison

Engineering Selection Recommendations

Both MMA02040C6201FB000 and MMA02040C6201FB300 are active production components manufactured by Vishay Beyschlag/Draloric/BC Components with full AEC-Q200 automotive qualification. Selection between these parts may be based on inventory availability and supply chain considerations. The MMA02040C6201FB300 currently maintains higher inventory levels (5615 pcs vs. 1007 pcs), which may influence procurement decisions for high-volume applications. Both parts carry identical ROHS3 compliance, REACH unaffected status, and MSL 1 rating, ensuring equivalent performance in moisture-sensitive environments and regulatory compliance across automotive and industrial applications.

Frequently Asked Questions (FAQ)

Q: Can MMA02040C6201FB300 be used as a direct replacement for MMA02040C6201FB000?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters, including resistance value, tolerance, power rating, package dimensions, temperature characteristics, and automotive qualifications. Direct substitution is supported without circuit modification.

Q: Are there any differences in the MELF 0204 package dimensions between these parts?

A: No. Both parts share identical package specifications: 0.055" diameter × 0.142" length (1.40mm × 3.60mm). Physical interchangeability is guaranteed.

Q: Do both parts meet the same automotive standards?

A: Yes. Both MMA02040C6201FB000 and MMA02040C6201FB300 carry AEC-Q200 qualification with anti-sulfur coating, meeting identical automotive reliability and environmental requirements.

Q: What is the significance of the part number suffix difference (FB000 vs. FB300)?

A: The suffix variation indicates different manufacturing batches or tape reel configurations within the same product specification. All electrical and mechanical parameters remain identical.

Q: Are moisture sensitivity considerations the same for both parts?

A: Yes. Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions and unlimited shelf life under standard storage conditions.

Q: Can these parts be used interchangeably in high-temperature automotive applications?

A: Yes. Both parts maintain identical operating temperature range (-55°C to 155°C) and temperature coefficient (±50ppm/°C), ensuring equivalent performance in automotive thermal environments.