MM74HC4316MTC Equivalent & Substitute Parts

Part Overview

The MM74HC4316MTC is a 4-circuit IC switch with SPST-NO configuration, 70Ohm on-state resistance, and 16-TSSOP surface mount packaging. Manufactured by onsemi, this component is classified as obsolete, making equivalent and substitute parts necessary for new designs and ongoing production requirements. The part operates across 2V to 12V single supply or ±2V to ±6V dual supply configurations, with switching times of 14ns (Ton) and 20ns (Toff), and supports 100MHz -3dB bandwidth operation.

Substiute Parts

MM74HC4316MTC
onsemiIn Stock: 848MM74HC4316MTC Datasheet
MM74HC4316MTC
Current Part
74HC4316PW,118
Nexperia USA Inc.In Stock: 353174HC4316PW,118 Datasheet
74HC4316PW,118
Similar
CD74HC4316PW
Texas InstrumentsIn Stock: 1426CD74HC4316PW Datasheet
CD74HC4316PW
Similar
CD74HC4316PWR
Texas InstrumentsIn Stock: 6601CD74HC4316PWR Datasheet
CD74HC4316PWR
Similar

Key Parameters

Parameter MM74HC4316MTC
Manufacturer onsemi
Switch Circuit SPST - NO
Number of Circuits 4
Multiplexer/Demultiplexer Circuit 1:1
On-State Resistance (Max) 70Ohm
Voltage - Supply, Single (V+) 2V ~ 12V
Voltage - Supply, Dual (V±) ±2V ~ 6V
Switch Time (Ton, Toff) (Max) 14ns, 20ns
-3dB Bandwidth 100MHz
Current - Leakage (IS(off)) (Max) 100nA
Operating Temperature -40°C ~ 85°C
Package / Case 16-TSSOP (0.173", 4.40mm Width)
Product Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the MM74HC4316MTC is determined by the following core parameters:

  • Functional Topology: SPST-NO switch circuit with 1:1 multiplexer/demultiplexer configuration and 4 circuits
  • Package Compatibility: 16-TSSOP surface mount package with identical 0.173" (4.40mm) width
  • Electrical Compatibility: Supply voltage ranges, on-state resistance, leakage current, and switching characteristics
  • Environmental Specifications: Operating temperature range and moisture sensitivity level

The three substitute parts listed below maintain the same functional topology and package form factor. Variations in on-state resistance, supply voltage ranges, switching times, and operating temperature ranges are documented to enable informed selection based on application requirements.

Parameter Comparison

Parameter MM74HC4316MTC (onsemi) 74HC4316PW,118 (Nexperia) CD74HC4316PW (TI) CD74HC4316PWR (TI)
Switch Circuit SPST - NO SPST - NO SPST - NO SPST - NO
Number of Circuits 4 4 4 4
Multiplexer/Demultiplexer Circuit 1:1 1:1 1:1 1:1
On-State Resistance (Max) 70Ohm 135Ohm 170Ohm 170Ohm
Channel-to-Channel Matching (ΔRon) 5Ohm 6Ohm 5Ohm 5Ohm
Voltage - Supply, Single (V+) 2V ~ 12V 2V ~ 10V 2V ~ 6V 2V ~ 6V
Voltage - Supply, Dual (V±) ±2V ~ 6V ±1V ~ 5V ±1V ~ 5V ±1V ~ 5V
Switch Time (Ton, Toff) (Max) 14ns, 20ns 16ns, 16ns 37ns, 37ns 37ns, 37ns
-3dB Bandwidth 100MHz 160MHz 200MHz 200MHz
Current - Leakage (IS(off)) (Max) 100nA 100nA 100nA 100nA
Crosstalk -50dB @ 1MHz -60dB @ 1MHz - -
Operating Temperature -40°C ~ 85°C -40°C ~ 125°C -55°C ~ 125°C -55°C ~ 125°C
Package / Case 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP
Mounting Type Surface Mount Surface Mount Surface Mount Surface Mount
Product Status Obsolete Active Last Time Buy Active
Moisture Sensitivity Level (MSL) 1 (Unlimited) 1 (Unlimited) 1 (Unlimited) 1 (Unlimited)
REACH Status REACH Unaffected REACH Unaffected REACH Unaffected REACH Unaffected

Engineering Selection Recommendations

CD74HC4316PWR (Texas Instruments) is the primary substitute for new designs. This part is actively manufactured, ROHS3 compliant, and available in Tape & Reel packaging with 6515 pieces in stock. It maintains identical functional topology and package form factor while offering extended operating temperature range (-55°C to 125°C) and higher -3dB bandwidth (200MHz). The increased on-state resistance (170Ohm versus 70Ohm) and longer switching times (37ns versus 14ns/20ns) must be evaluated against application requirements.

74HC4316PW,118 (Nexperia USA Inc.) is an active alternative with higher inventory availability (3513 pieces). This part provides intermediate on-state resistance (135Ohm) and faster switching times (16ns) compared to Texas Instruments variants, with extended operating temperature range (-40°C to 125°C) and ROHS3 compliance. Tape & Reel packaging is standard.

CD74HC4316PW (Texas Instruments) carries Last Time Buy status and is available in Tube packaging (1401 pieces in stock). This variant shares electrical specifications with CD74HC4316PWR but differs in packaging format. Selection of this part should account for its end-of-life status.

For applications requiring the lowest on-state resistance (70Ohm) and fastest switching times of the original MM74HC4316MTC, no direct equivalent exists among active products. Substitute selection must prioritize application-specific requirements for resistance, switching speed, and operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can I directly replace MM74HC4316MTC with CD74HC4316PWR in my design?

A: Direct replacement is possible from a package and functional topology perspective. Both are 4-circuit SPST-NO switches in 16-TSSOP packaging. However, the CD74HC4316PWR has higher on-state resistance (170Ohm versus 70Ohm) and longer switching times (37ns versus 14ns/20ns). Circuit performance must be evaluated to confirm these differences do not impact application requirements.

Q: What is the key difference between 74HC4316PW,118 and the Texas Instruments alternatives?

A: The 74HC4316PW,118 from Nexperia offers intermediate on-state resistance (135Ohm) and faster switching times (16ns) compared to Texas Instruments parts (170Ohm, 37ns). All three substitutes maintain identical package form factor and functional topology. Selection depends on whether the application can tolerate higher resistance and slower switching speeds.

Q: Are all substitute parts RoHS compliant?

A: The Texas Instruments variants (CD74HC4316PW and CD74HC4316PWR) are ROHS3 compliant. The Nexperia part (74HC4316PW,118) is also ROHS3 compliant. All parts maintain REACH Unaffected status and MSL 1 (Unlimited) moisture sensitivity level.

Q: What packaging options are available for substitutes?

A: CD74HC4316PWR is supplied in Tape & Reel (TR) packaging. CD74HC4316PW is supplied in Tube packaging. 74HC4316PW,118 is supplied in Tape & Reel (TR) packaging. All maintain the same 16-TSSOP form factor.

Q: Which substitute has the best availability?

A: CD74HC4316PWR (Texas Instruments) has the highest inventory with 6515 pieces in stock and active product status, making it the most suitable choice for ongoing production requirements.

Request Quote (Ships tomorrow)