MM74HC4052M Equivalent & Substitute Parts

Part Overview

The MM74HC4052M is a 2-circuit IC switch with SP4T (single-pole, 4-throw) configuration and 4:1 multiplexer/demultiplexer functionality manufactured by onsemi. This interface component operates across 2V to 6V single supply or ±2V to 6V dual supply configurations. The part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement.

Key Parameters

Parameter	MM74HC4052M Value
Switch Circuit Configuration	SP4T
Multiplexer/Demultiplexer Circuit	4:1
Number of Circuits	2
On-State Resistance (Max)	100Ohm
Channel-to-Channel Matching (ΔRon)	15Ohm
Voltage - Supply, Single (V+)	2V ~ 6V
Voltage - Supply, Dual (V±)	±2V ~ 6V
Switch Time (Ton, Toff) (Max)	41ns, 32ns
-3dB Bandwidth	35MHz
Channel Capacitance (CS(off), CD(off))	5pF, 45pF
Current - Leakage (IS(off)) (Max)	100nA
Crosstalk	-50dB @ 1MHz
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	16-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the MM74HC4052M is determined by the following critical parameters:

Switch Circuit & Multiplexer Configuration: Must be SP4T with 4:1 multiplexer/demultiplexer and 2 circuits
On-State Resistance: Maximum 100Ohm acceptable; lower values are compatible
Package & Mounting: 16-SOIC surface mount form factor required
Supply Voltage Compatibility: Must support 2V ~ 6V single supply minimum
Operating Temperature Range: Must encompass or exceed -40°C ~ 85°C

Substitute parts are grouped into two categories based on electrical performance characteristics:

Category A - Direct Electrical Equivalents (100Ohm On-State Resistance)

MC74HC4052ADG, MC74HC4052ADR2G, MC74HC4052ADWG, MC74HC4052ADWR2G (onsemi)
MAX4052ACSE+ (Analog Devices Inc./Maxim Integrated)

Category B - Higher Performance Alternatives (130Ohm or 155Ohm On-State Resistance)

CD74HC4052M, CD74HC4052M96, CD74HC4052MT (Texas Instruments)
HEF4052BT,013, HEF4052BT,653 (Nexperia USA Inc.)

Parameter Comparison

Part Number	Manufacturer	On-State Resistance (Max)	ΔRon (Max)	Supply Voltage Single	Supply Voltage Dual	Operating Temp	-3dB Bandwidth	Leakage Current (Max)	Product Status	Package
MM74HC4052M	onsemi	100Ohm	15Ohm	2V ~ 6V	±2V ~ 6V	-40°C ~ 85°C	35MHz	100nA	Obsolete	16-SOIC (3.90mm)
MC74HC4052ADG	onsemi	100Ohm	10Ohm	2V ~ 6V	±2V ~ 6V	-55°C ~ 125°C	95MHz	100nA	Active	16-SOIC (3.90mm)
MC74HC4052ADR2G	onsemi	100Ohm	10Ohm	2V ~ 6V	±2V ~ 6V	-55°C ~ 125°C	95MHz	100nA	Active	16-SOIC (3.90mm)
MC74HC4052ADWG	onsemi	100Ohm	10Ohm	2V ~ 6V	±2V ~ 6V	-55°C ~ 125°C	95MHz	100Ohm	Obsolete	16-SOIC (7.50mm)
MC74HC4052ADWR2G	onsemi	100Ohm	10Ohm	2V ~ 6V	±2V ~ 6V	-55°C ~ 125°C	95MHz	100nA	Active	16-SOIC (7.50mm)
CD74HC4052M	Texas Instruments	130Ohm	5Ohm	2V ~ 6V	±1V ~ 5V	-55°C ~ 125°C	185MHz	200nA	Last Time Buy	16-SOIC (3.90mm)
CD74HC4052M96	Texas Instruments	130Ohm	5Ohm	2V ~ 6V	±1V ~ 5V	-55°C ~ 125°C	185MHz	200nA	Active	16-SOIC (3.90mm)
CD74HC4052MT	Texas Instruments	130Ohm	5Ohm	2V ~ 6V	±1V ~ 5V	-55°C ~ 125°C	185MHz	200nA	Last Time Buy	16-SOIC (3.90mm)
HEF4052BT,013	Nexperia USA Inc.	155Ohm	5Ohm	3V ~ 15V	-	-40°C ~ 125°C	70MHz	200nA	Discontinued at DiGi Electronics	16-SOIC (3.90mm)
HEF4052BT,653	Nexperia USA Inc.	155Ohm	5Ohm	3V ~ 15V	-	-40°C ~ 125°C	70MHz	200nA	Active	16-SOIC (3.90mm)
MAX4052ACSE+	Analog Devices Inc./Maxim Integrated	100Ohm	6Ohm	2V ~ 16V	±2.7V ~ 8V	0°C ~ 70°C	-	100pA	Active	16-SOIC (3.90mm)

Engineering Selection Recommendations

Primary Substitutes (Recommended for New Designs)

MC74HC4052ADG and MC74HC4052ADR2G are the preferred substitutes. Both are active products from onsemi with identical electrical specifications to the MM74HC4052M, including 100Ohm on-state resistance and 2V ~ 6V supply voltage compatibility. These parts offer improved performance with 95MHz bandwidth versus 35MHz, extended operating temperature range (-55°C ~ 125°C), and ROHS3 compliance. The ADR2G variant is packaged in Cut Tape & Digi-Reel format for automated assembly.

Alternative Substitutes (Performance Enhancement)

CD74HC4052M96 from Texas Instruments is an active product offering superior bandwidth (185MHz) and tighter channel matching (5Ohm ΔRon). This part is suitable for applications requiring higher frequency performance. CD74HC4052MT is available in Tape & Reel packaging. Both Texas Instruments parts carry ROHS3 compliance and extended temperature range (-55°C ~ 125°C).

Limited Availability Substitutes

HEF4052BT,653 from Nexperia USA Inc. is an active product with 155Ohm on-state resistance and 70MHz bandwidth. This part operates across 3V ~ 15V single supply, providing wider voltage flexibility than the MM74HC4052M. The higher on-state resistance may impact signal integrity in low-impedance applications.

MAX4052ACSE+ from Analog Devices Inc./Maxim Integrated provides 100Ohm on-state resistance with extended supply voltage range (2V ~ 16V single, ±2.7V ~ 8V dual). Operating temperature range is limited to 0°C ~ 70°C, restricting use in industrial temperature applications.

Avoid for New Designs

MC74HC4052ADWG and MC74HC4052ADWG are obsolete products. CD74HC4052M and CD74HC4052MT are Last Time Buy status from Texas Instruments. HEF4052BT,013 is discontinued at DiGi Electronics.

Frequently Asked Questions (FAQ)

Q: Can MC74HC4052ADG directly replace MM74HC4052M in existing designs?

A: Yes. Both parts share identical switch circuit configuration (SP4T 4:1), on-state resistance (100Ohm maximum), and supply voltage requirements (2V ~ 6V single, ±2V ~ 6V dual). The MC74HC4052ADG operates across an extended temperature range (-55°C ~ 125°C versus -40°C ~ 85°C) and offers improved bandwidth (95MHz versus 35MHz), making it a direct functional replacement with performance enhancement.

Q: What is the difference between MC74HC4052ADG and MC74HC4052ADR2G?

A: Both parts are electrically identical with matching specifications. The primary difference is packaging format: ADG is supplied in Tube packaging, while ADR2G is supplied in Cut Tape & Digi-Reel format optimized for automated pick-and-place assembly. Select based on manufacturing process requirements.

Q: Why do Texas Instruments CD74HC4052 parts have higher on-state resistance (130Ohm)?

A: The CD74HC4052 series uses different semiconductor process technology, resulting in 130Ohm on-state resistance compared to 100Ohm for onsemi and Maxim parts. This higher resistance is within acceptable substitution parameters for most applications but may introduce additional signal attenuation in low-impedance switching circuits. Verify signal integrity requirements before selection.

Q: Is HEF4052BT,653 compatible with 2V ~ 6V supply voltage applications?

A: No. The HEF4052BT,653 operates across 3V ~ 15V single supply voltage only, with no dual supply option. Applications requiring 2V operation are incompatible with this part. Use MC74HC4052ADG or CD74HC4052M96 for 2V ~ 6V compatibility.

Q: What is the significance of ROHS3 compliance on substitute parts?

A: ROHS3 compliance indicates the part meets Restriction of Hazardous Substances Directive requirements, restricting lead, cadmium, mercury, and other hazardous materials. All recommended active substitutes (MC74HC4052ADG, MC74HC4052ADR2G, CD74HC4052M96, CD74HC4052MT, HEF4052BT,653) carry ROHS3 certification, ensuring regulatory compliance for commercial and industrial applications.

Q: Can MAX4052ACSE+ be used in industrial temperature applications?

A: No. The MAX4052ACSE+ operates across 0°C ~ 70°C, limiting use to commercial temperature range. Industrial applications requiring -40°C ~ 85°C or extended range (-55°C ~ 125°C) must use MC74HC4052ADG, MC74HC4052ADR2G, or Texas Instruments CD74HC4052 series parts.

Q: What packaging considerations apply when substituting MM74HC4052M?

A: The MM74HC4052M uses 16-SOIC package with 0.154" (3.90mm) width. Most recommended substitutes (MC74HC4052ADG, MC74HC4052ADR2G, CD74HC4052M96, CD74HC4052MT, HEF4052BT,653, MAX4052ACSE+) use identical 16-SOIC (3.90mm) packaging, ensuring PCB footprint compatibility. MC74HC4052ADWG and MC74HC4052ADWR2G use 16-SOIC (7.50mm) width, requiring PCB layout modification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message