MLZ2012DR10MT000 Equivalent & Substitute Parts

Part Overview

The MLZ2012DR10MT000 is a 100 nH shielded multilayer inductor manufactured by TDK Corporation, rated for 1.15 A with 70mOhm DC resistance in a 0805 (2012 Metric) surface mount package. This component is classified as "Not For New Designs," indicating it has been superseded in TDK's product portfolio. Finding equivalent substitute parts is necessary for ongoing maintenance, repair, and legacy system support where this specific inductance value and current rating are required.

Substiute Parts

MLZ2012DR10MT000

TDK CorporationIn Stock: 715MLZ2012DR10MT000 Datasheet

Current PartRFQ

MLZ2012DR10DT000

TDK CorporationIn Stock: 1566MLZ2012DR10DT000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MLZ2012DR10MT000 is determined by strict equivalence across the following critical parameters:

• Inductance Value: 100 nH (exact match required)
• Tolerance: ±20% (must match or be tighter)
• Current Rating: 1.15 A minimum
• Saturation Current (Isat): 1 A minimum
• DC Resistance (DCR): 70 mOhm (exact match required)
• Shielding Type: Shielded (required for EMI performance)
• Package / Case: 0805 (2012 Metric) (mechanical and electrical compatibility)
• Operating Temperature Range: -55°C ~ 125°C minimum
• Compliance: ROHS3 Compliant, REACH Unaffected

The MLZ2012DR10DT000 meets all substitution criteria as a direct equivalent part.

Parameter Comparison

Engineering Selection Recommendations

The MLZ2012DR10DT000 is the direct substitute for MLZ2012DR10MT000. Both parts are manufactured by TDK Corporation within the MLZ series and share identical electrical and mechanical specifications. The primary distinction is product status: MLZ2012DR10MT000 is classified as "Not For New Designs," while MLZ2012DR10DT000 is Active. For applications requiring the 100 nH, 1.15 A shielded multilayer inductor in 0805 package format, MLZ2012DR10DT000 provides continuity with current manufacturing support and compliance certifications (ROHS3 Compliant, REACH Unaffected).

Frequently Asked Questions (FAQ)

Q: Can MLZ2012DR10DT000 be used as a direct replacement for MLZ2012DR10MT000?

A: Yes. Both parts are electrically and mechanically identical with matching inductance (100 nH), current rating (1.15 A), DC resistance (70 mOhm), package (0805), and operating temperature range (-55°C ~ 125°C). The substitute part is currently in active production status.

Q: What are the critical parameters that define substitution eligibility?

A: Inductance value (100 nH), tolerance (±20%), current rating (1.15 A), saturation current (1 A), DC resistance (70 mOhm), shielding type (Shielded), and package format (0805 / 2012 Metric) must all match exactly. Operating temperature range and compliance certifications must meet or exceed the original part requirements.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both MLZ2012DR10MT000 and MLZ2012DR10DT000 are ROHS3 Compliant and REACH Unaffected. Moisture Sensitivity Level is 1 (Unlimited) for both parts.

Q: Does the frequency-dependent performance differ between these parts?

A: Both parts are tested at 25 MHz for inductance. MLZ2012DR10DT000 specifies a self-resonant frequency of 500 MHz, while this parameter is not provided for MLZ2012DR10MT000. This does not affect substitution eligibility for applications operating within the specified frequency test range.

Q: What packaging formats are available for these parts?

A: Both parts are supplied in Tape & Reel (TR) format, standard for surface mount production environments. The physical package is 0805 (2012 Metric) with dimensions 2.00mm L x 1.25mm W x 1.05mm H (seated).