MLX90215LVA-LA03 Equivalent & Substitute Parts

Part Overview

The MLX90215LVA-LA03 is a Hall Effect analog magnetic sensor manufactured by Melexis Technologies NV, designed for single-axis magnetic field detection with analog voltage output. This component operates within a 4.5V to 5.5V supply range and is housed in a 4-SIP through-hole package configuration. The device features temperature compensation across an operating range of -40°C to 150°C.

The MLX90215LVA-LA03 is classified as an obsolete product. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support legacy system maintenance where this sensor remains in active use.

Substiute Parts

MLX90215LVA-LA03

Melexis Technologies NVIn Stock: 892MLX90215LVA-LA03 Datasheet

Current PartRFQ

MLX90215LVA-AAA-111-BU

Melexis Technologies NVIn Stock: 5802MLX90215LVA-AAA-111-BU Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MLX90215LVA-LA03 is determined by strict alignment with the following critical parameters:

Mandatory Matching Criteria:

• Manufacturer: Melexis Technologies NV
• Technology: Hall Effect
• Axis Configuration: Single
• Output Type: Analog Voltage
• Voltage Supply Range: 4.5V ~ 5.5V
• Current Supply (Max): 6.5mA
• Resolution: 10 bit
• Operating Temperature Range: -40°C ~ 150°C
• Features: Temperature Compensated
• Package Type: 4-SIP / 4-SSIP Module
• Mounting Type: Through Hole
• RoHS Compliance: ROHS3 Compliant

The substitute part MLX90215LVA-AAA-111-BU meets all mandatory matching criteria and is therefore classified as a direct equivalent for the MLX90215LVA-LA03.

Parameter Comparison

Engineering Selection Recommendations

The MLX90215LVA-AAA-111-BU is a direct functional equivalent to the MLX90215LVA-LA03 for applications requiring Hall Effect single-axis analog magnetic sensing within the specified voltage and temperature parameters.

Compliance Basis: Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for industrial and commercial applications. Both components are classified as obsolete products, indicating that either part selection should be evaluated within the context of long-term supply chain planning.

Electrical Compatibility: The substitute part operates within identical voltage supply ranges (4.5V ~ 5.5V) and maintains the same current supply maximum (6.5mA). The 10-bit resolution and temperature compensation features are preserved, ensuring signal processing compatibility with existing circuit designs.

Physical Compatibility: Both parts utilize identical 4-SIP through-hole package configurations, enabling direct mechanical substitution on printed circuit boards without layout modifications.

Operational Differences: The MLX90215LVA-AAA-111-BU specifies a maximum output current of 2mA, compared to 12mA for the MLX90215LVA-LA03. Applications requiring higher output current loads must evaluate this parameter against circuit requirements. The substitute part specifies a bandwidth of 1.3kHz, providing defined frequency response characteristics.

Frequently Asked Questions (FAQ)

Q: Can MLX90215LVA-AAA-111-BU be used as a direct replacement for MLX90215LVA-LA03?

A: Yes. Both parts share identical core specifications: Hall Effect technology, single-axis configuration, analog voltage output, 4.5V to 5.5V supply range, 6.5mA maximum supply current, 10-bit resolution, -40°C to 150°C operating temperature, temperature compensation, and 4-SIP through-hole packaging. The substitute part is electrically and mechanically compatible.

Q: What is the difference in output current specifications?

A: The MLX90215LVA-LA03 specifies a maximum output current of 12mA, while the MLX90215LVA-AAA-111-BU specifies 2mA. Circuit designs must verify that output current requirements do not exceed 2mA when using the substitute part.

Q: Are both parts RoHS compliant?

A: Yes. Both the MLX90215LVA-LA03 and MLX90215LVA-AAA-111-BU are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards.

Q: What does the bandwidth specification of 1.3kHz indicate?

A: The 1.3kHz bandwidth specified for the MLX90215LVA-AAA-111-BU defines the frequency response characteristics of the sensor output. This parameter is not specified for the MLX90215LVA-LA03 in the provided data.

Q: Are there package differences between these parts?

A: Both parts use 4-SIP through-hole package configurations. The MLX90215LVA-AAA-111-BU is supplied in bulk packaging, while the MLX90215LVA-LA03 packaging specification is not provided. This does not affect electrical or mechanical compatibility.

Q: Why are both parts classified as obsolete?

A: Obsolete product status indicates that these components are no longer in active production. For new designs or long-term applications, evaluation of current-generation Hall Effect sensor alternatives from Melexis Technologies NV or other manufacturers may be appropriate.