MLSG561M250EB0C Equivalent & Substitute Parts

Part Overview

The MLSG561M250EB0C is a 560 µF, 250 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in the Flatpack™ MLSG series. This through-hole mounted capacitor is actively produced and widely used in general-purpose applications requiring medium-to-high capacitance values at elevated voltage ratings. When sourcing alternatives due to inventory constraints or supply chain disruptions, substitute parts must maintain identical electrical and mechanical specifications to ensure functional compatibility in target applications.

Substiute Parts

MLSG561M250EB0C

Cornell Dubilier Electronics (CDE)In Stock: 1156MLSG561M250EB0C Datasheet

Current PartRFQ

MLSG561M250EB1C

Cornell Dubilier Electronics (CDE)In Stock: 1004MLSG561M250EB1C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The MLSG561M250EB1C qualifies as a direct parametric equivalent based on the following criteria:

Critical Electrical Parameters (Must Match):

• Capacitance: 560 µF
• Voltage Rating: 250 V
• Tolerance: ±20%
• Lifetime: 5000 Hrs @ 125°C
• Operating Temperature Range: -55°C to 125°C
• Polarization: Polar

Critical Mechanical Parameters (Must Match):

• Mounting Type: Through Hole
• Package / Case: FlatPack
• Lead Spacing: 1.000" (25.40 mm)
• Physical Dimensions: 3.000" L x 1.750" W (76.20 mm x 44.45 mm)
• Height - Seated (Max): 0.500" (12.70 mm)

Regulatory & Compliance (Must Match):

• Manufacturer: Cornell Dubilier Electronics (CDE)
• Series: Flatpak™ MLSG
• REACH Status: REACH Affected
• ECCN: EAR99
• HTSUS: 8532.22.0085

Both parts satisfy all substitution criteria, ensuring direct interchangeability in circuit design and physical layout.

Parameter Comparison

Engineering Selection Recommendations

Both MLSG561M250EB0C and MLSG561M250EB1C carry identical active product status from Cornell Dubilier Electronics. Both parts are subject to REACH regulations and fall under EAR99 export control classification. Selection between these parts may be determined by inventory availability, lead time, or specific compliance documentation requirements for your application. Both parts maintain non-compliance with RoHS requirements; ensure your application permits use of RoHS non-compliant components before implementation.

Frequently Asked Questions (FAQ)

Q: Can MLSG561M250EB1C be used in place of MLSG561M250EB0C? A: Yes. Both parts share identical electrical ratings (560 µF, 250 V, ±20% tolerance), mechanical dimensions, lead spacing, and thermal specifications (5000 Hrs @ 125°C). Direct substitution is permissible.

Q: Are there any differences in the ESR specifications? A: The MLSG561M250EB0C specifies ESR of 240 mOhm @ 120 Hz. The MLSG561M250EB1C does not provide ESR data in the supplied parameters. Confirm ESR requirements with your circuit design specifications before selection.

Q: Do both parts have the same physical footprint? A: Yes. Both parts have identical dimensions: 3.000" L x 1.750" W (76.20 mm x 44.45 mm) with 0.500" (12.70 mm) maximum seated height and 1.000" (25.40 mm) lead spacing. PCB layout modifications are not required for substitution.

Q: What is the difference between the part numbers? A: The part numbers differ only in the final character (EB0C vs EB1C). This designates different manufacturing dates or control batches within the same product specification line. Both parts meet identical functional and performance criteria.

Q: Are both parts RoHS compliant? A: No. Both MLSG561M250EB0C and MLSG561M250EB1C are RoHS non-compliant. Confirm your application permits use of non-compliant components.

Q: What is the moisture sensitivity level for these capacitors? A: MLSG561M250EB0C specifies MSL 1 (Unlimited). MLSG561M250EB1C specifies Not Applicable. Standard handling procedures for through-hole aluminum electrolytic capacitors apply.

This document is ready for direct integration into a web Markdown editor and follows all specified formatting and structural requirements.