MLS113M040EB0D Equivalent & Substitute Parts

Part Overview

The MLS113M040EB0D is an 11000 µF, 40 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in FlatPack, Tabbed configuration. This component is classified as Active product status and serves general-purpose applications requiring high capacitance density in a compact chassis-mount form factor. The part operates across a temperature range of -55°C to 125°C with a rated lifetime of 10000 hours at 85°C.

Identifying equivalent and substitute parts is necessary when the primary part number becomes unavailable, when inventory levels require sourcing alternatives, or when design flexibility permits selection from qualified equivalent components that maintain identical electrical and mechanical specifications.

Substiute Parts

MLS113M040EB0D

Cornell Dubilier Electronics (CDE)In Stock: 673MLS113M040EB0D Datasheet

Current PartRFQ

MLS113M040EB1A

Cornell Dubilier Electronics (CDE)In Stock: 1165MLS113M040EB1A Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of aluminum electrolytic capacitors is determined by strict equivalence across electrical and mechanical parameters. For the MLS113M040EB0D, substitute parts must satisfy all of the following criteria:

Electrical Parameters (Non-Negotiable):

• Capacitance: 11000 µF (exact match)
• Voltage Rating: 40 V (exact match)
• Tolerance: ±20% (exact match)
• ESR @ 120Hz: 36 mOhm (exact match)
• Lifetime @ 85°C: 10000 Hrs (exact match)
• Operating Temperature Range: -55°C to 125°C (exact match)
• Ripple Current @ 120 Hz: 16.9 A (exact match)
• Ripple Current @ 20 kHz: 19.5 A (exact match)

Mechanical Parameters (Non-Negotiable):

• Lead Spacing: 1.000" (25.40mm) (exact match)
• Physical Dimensions: 3.000" L x 1.750" W (76.20mm x 44.45mm) (exact match)
• Height - Seated (Max): 0.500" (12.70mm) (exact match)
• Mounting Type: Chassis Mount (exact match)
• Package / Case: FlatPack, Tabbed (exact match)

Compliance Parameters:

• Polarization: Polar (exact match)
• Series: MLS (exact match)
• Manufacturer: Cornell Dubilier Electronics (CDE)

The MLS113M040EB0D has one identified parametric equivalent within the provided substitute list.

Parameter Comparison

Engineering Selection Recommendations

The MLS113M040EB1A is a direct parametric equivalent to the MLS113M040EB0D. Both components are manufactured by Cornell Dubilier Electronics within the MLS series and share identical electrical specifications, mechanical dimensions, and compliance certifications.

Selection Basis:

Both parts maintain Active product status, indicating ongoing manufacturer support and availability. Both components carry identical RoHS non-compliant and REACH Affected designations, reflecting their compliance profile. The MSL rating of 1 (Unlimited) applies to both parts, indicating no moisture sensitivity constraints during storage or handling.

The MLS113M040EB1A currently maintains higher inventory availability (1140 Pcs) compared to the MLS113M040EB0D (654 Pcs), making it a viable alternative when supply considerations influence component selection.

From an engineering perspective, either part number satisfies identical circuit requirements. Selection between these two equivalent parts should be based on inventory availability, procurement lead times, and supply chain considerations rather than technical performance differences.

Frequently Asked Questions (FAQ)

Q: Can MLS113M040EB1A be used as a direct replacement for MLS113M040EB0D?

A: Yes. The MLS113M040EB1A is a parametric equivalent with identical capacitance (11000 µF), voltage rating (40 V), ESR (36 mOhm @ 120Hz), ripple current specifications, physical dimensions, and mounting configuration. Both parts are manufactured by Cornell Dubilier Electronics within the MLS series and carry identical compliance certifications.

Q: Are there any differences in the physical footprint between these parts?

A: No. Both the MLS113M040EB0D and MLS113M040EB1A share identical mechanical specifications: 3.000" L x 1.750" W (76.20mm x 44.45mm) body dimensions, 0.500" (12.70mm) maximum seated height, and 1.000" (25.40mm) lead spacing. They are both FlatPack, Tabbed configuration with Chassis Mount mounting type.

Q: Do these parts have different temperature operating ranges?

A: No. Both parts operate across the identical temperature range of -55°C to 125°C with a rated lifetime of 10000 hours at 85°C.

Q: What is the difference between the part numbers MLS113M040EB0D and MLS113M040EB1A?

A: The part numbers differ in their suffix designation (EB0D versus EB1A), which typically indicates different manufacturing batches or internal revision levels within Cornell Dubilier Electronics' production sequence. The electrical and mechanical specifications remain identical.

Q: Are both parts RoHS compliant?

A: No. Both the MLS113M040EB0D and MLS113M040EB1A are RoHS non-compliant. Both parts are REACH Affected. These compliance designations are identical across both part numbers.

Q: Can I substitute these parts in existing circuit board designs without layout modifications?

A: Yes. The identical physical dimensions, lead spacing, and mounting type (Chassis Mount, FlatPack, Tabbed) ensure that either part can be substituted without requiring PCB layout changes or mechanical redesign.

Q: Which part should I select if both are available?

A: Selection should be based on procurement factors such as current inventory levels, supplier availability, and lead times. From a technical standpoint, both parts are equivalent and will perform identically in the circuit.