MLPV800 Equivalent & Substitute Parts

Part Overview

The MLPV800 is an RF antenna designed for ISM and PCS applications operating in the UHF frequency band. This through-hole mounted dome antenna covers the 806MHz to 960MHz frequency range with 3dBi gain and 1.5 VSWR. The product is currently obsolete, making identification of compatible substitute parts essential for system redesign, maintenance, and component sourcing.

Substiute Parts

MLPV800

PCTEL, Inc.In Stock: 1139MLPV800 Datasheet

Current PartRFQ

BMLPV800

PCTEL, Inc.In Stock: 793BMLPV800 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MLPV800 is determined by the following critical parameters:

• Frequency coverage: 806MHz ~ 960MHz with 883MHz center frequency
• Antenna type: Dome configuration
• Electrical performance: 3dBi gain and 100W power handling
• Physical dimensions: 2.400" maximum height
• Frequency group: UHF (300MHz ~ 1GHz)

The BMLPV800 qualifies as a substitute based on matching frequency range, antenna type, gain, power rating, and physical height. The primary difference is the mounting interface: the MLPV800 uses through-hole mounting while the BMLPV800 uses panel mount configuration. This represents a mechanical redesign requirement rather than an electrical incompatibility.

Parameter Comparison

Engineering Selection Recommendations

The BMLPV800 is the manufacturer-recommended substitute for the obsolete MLPV800. Both parts maintain identical frequency coverage, antenna type, gain, and power handling specifications. The BMLPV800 is currently in active production status with confirmed inventory availability.

Selection of the BMLPV800 requires mechanical redesign to accommodate panel mount installation in place of through-hole mounting. The BMLPV800 provides enhanced environmental protection with IP67 ingress protection rating. The VSWR specification increases from 1.5 to 2, which remains within acceptable operating parameters for ISM and PCS applications.

Frequently Asked Questions (FAQ)

Q: Can the BMLPV800 directly replace the MLPV800 without modification?

A: Electrical substitution is direct. Mechanical redesign is required due to different mounting interfaces: MLPV800 uses through-hole mounting while BMLPV800 uses panel mount configuration.

Q: Are the frequency specifications identical between these parts?

A: Yes. Both parts operate across 806MHz to 960MHz with 883MHz center frequency and deliver 3dBi gain across the entire band.

Q: What is the significance of the VSWR difference?

A: The MLPV800 specifies 1.5 VSWR while the BMLPV800 specifies 2 VSWR. Both values are acceptable for ISM and PCS applications. The difference reflects the panel mount design variation.

Q: Does the IP67 rating on the BMLPV800 provide additional benefits?

A: IP67 ingress protection on the BMLPV800 provides enhanced environmental sealing compared to the unspecified ingress protection of the MLPV800. This is beneficial for outdoor or harsh environment deployments.

Q: What is the inventory status for these parts?

A: MLPV800 is obsolete with no active production. BMLPV800 is active production status with 776 pieces in stock.