MLP332M080EB0D Equivalent & Substitute Parts

Part Overview

The MLP332M080EB0D is a 3300 µF, 80 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in the MLP series. This FlatPack, tabbed chassis mount capacitor is designed for general purpose applications requiring high capacitance density in a compact form factor. The part is currently active in production with 919 units in stock. Substitute parts are identified to support procurement continuity, inventory management, and application flexibility while maintaining electrical and mechanical compatibility.

Substiute Parts

MLP332M080EB0D

Cornell Dubilier Electronics (CDE)In Stock: 983MLP332M080EB0D Datasheet

Current PartRFQ

MLP332M080EB1A

Cornell Dubilier Electronics (CDE)In Stock: 1036MLP332M080EB1A Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MLP332M080EB0D is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must maintain identical specifications in the following categories:

Electrical Parameters (Non-Negotiable):

• Capacitance value: 3300 µF
• Rated voltage: 80 V
• Tolerance: ±20%
• ESR: 44 mOhm @ 120 Hz
• Lifetime rating: 2000 Hrs @ 85°C
• Operating temperature range: -55°C to 85°C
• Ripple current specifications: 7.5 A @ 120 Hz and 9 A @ 20 kHz

Mechanical Parameters (Non-Negotiable):

• Package type: FlatPack, Tabbed
• Mounting type: Chassis Mount
• Lead spacing: 1.000" (25.40 mm)
• Physical dimensions: 3.000" L x 1.750" W (76.20 mm x 44.45 mm)
• Height seated (max): 0.500" (12.70 mm)
• Polarization: Polar

The MLP332M080EB0D has one identified substitute part: MLP332M080EB1A. This substitute maintains complete parametric equivalence across all electrical and mechanical specifications, ensuring direct interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the MLP332M080EB0D and MLP332M080EB1A are active production parts from Cornell Dubilier Electronics with identical electrical and mechanical specifications. Selection between these parts is based on availability and procurement requirements rather than technical differentiation.

MLP332M080EB0D: 919 units currently in stock. Primary selection for immediate procurement needs.

MLP332M080EB1A: 982 units currently in stock. Alternative selection when primary part availability is constrained or for secondary sourcing strategies.

Both parts carry identical regulatory compliance status (RoHS non-compliant, REACH Affected) and are classified under ECCN EAR99 with HTSUS code 8532.22.0085. No technical or compliance advantage exists between the two parts. Selection should be driven by inventory availability and supply chain logistics.

Frequently Asked Questions (FAQ)

Q: Can MLP332M080EB1A be used as a direct replacement for MLP332M080EB0D?

A: Yes. The MLP332M080EB1A is a parametric equivalent with identical electrical and mechanical specifications. Direct substitution is supported without circuit modification or performance degradation.

Q: Are there any differences in the FlatPack, Tabbed package between these parts?

A: No. Both parts use identical FlatPack, Tabbed packaging with the same lead spacing (1.000" / 25.40 mm), physical dimensions (3.000" L x 1.750" W), and height (0.500" max seated). Chassis mount compatibility is identical.

Q: Do these parts have the same ESR and ripple current ratings?

A: Yes. Both parts specify 44 mOhm ESR @ 120 Hz, 7.5 A ripple current @ 120 Hz, and 9 A ripple current @ 20 kHz. Thermal and electrical performance characteristics are equivalent.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -55°C to 85°C with a rated lifetime of 2000 hours at 85°C. Temperature performance is identical.

Q: Are there any regulatory or compliance differences between these parts?

A: No. Both parts share identical RoHS non-compliant status, REACH Affected designation, ECCN EAR99 classification, and HTSUS code 8532.22.0085. Regulatory treatment is equivalent.

Q: What is the capacitance tolerance for these parts?

A: Both parts specify ±20% tolerance on the 3300 µF capacitance value. Tolerance specifications are identical.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. The MLP332M080EB0D and MLP332M080EB1A are fully interchangeable. No design changes, PCB modifications, or application adjustments are required for substitution.