MLP272M100EB1D Equivalent & Substitute Parts

Part Overview

The MLP272M100EB1D is a 2700 µF, 100 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in the MLP series. This component is designed for general-purpose applications requiring high capacitance density in a compact FlatPack form factor with tabbed leads for chassis mounting. The part maintains an active product status with 880 pieces currently in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications where the primary part number may have limited availability or require alternative sourcing options.

Substiute Parts

MLP272M100EB1D

Cornell Dubilier Electronics (CDE)In Stock: 913MLP272M100EB1D Datasheet

Current PartRFQ

MLP272M100EB0D

Cornell Dubilier Electronics (CDE)In Stock: 847MLP272M100EB0D Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MLP272M100EB1D is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part MLP272M100EB0D is classified as a parametric equivalent based on the following criteria:

Electrical Parameters (Must Match Exactly):

• Capacitance: 2700 µF
• Voltage Rating: 100 V
• Tolerance: ±20%
• ESR: 47 mOhm @ 120 Hz
• Lifetime: 2000 Hrs @ 85°C
• Operating Temperature Range: -55°C to 85°C
• Ripple Current @ 120 Hz: 7.4 A
• Ripple Current @ 20 kHz: 8.7 A

Mechanical Parameters (Must Match Exactly):

• Package Type: FlatPack, Tabbed
• Lead Spacing: 1.000" (25.40mm)
• Physical Dimensions: 3.000" L x 1.750" W (76.20mm x 44.45mm)
• Height - Seated (Max): 0.500" (12.70mm)
• Mounting Type: Chassis Mount
• Polarization: Polar

Compliance Parameters:

• Manufacturer: Cornell Dubilier Electronics (CDE)
• Series: MLP
• Product Status: Active
• RoHS Status: RoHS non-compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute part differs only in the final character of the part number designation (EB0D vs. EB1D), indicating a variant within the same product family with identical performance specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the MLP272M100EB1D and MLP272M100EB0D are active products from Cornell Dubilier Electronics with identical electrical and mechanical specifications. Selection between these parts should be based on the following factors:

Availability: The MLP272M100EB1D currently has 880 pieces in stock, while the MLP272M100EB0D has 783 pieces available. For applications requiring immediate procurement, inventory levels should be evaluated against project timelines.

Compliance Considerations: Both parts carry identical compliance designations: RoHS non-compliant and REACH Affected. Applications subject to RoHS or REACH restrictions require alternative component families. Both parts maintain Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture handling requirements during storage or assembly.

Regulatory Classification: Both parts are classified under ECCN EAR99 and HTSUS 8532.22.0085, indicating identical export control and tariff treatment.

Application Suitability: The MLP272M100EB1D and MLP272M100EB0D are functionally interchangeable for general-purpose applications requiring 2700 µF capacitance at 100 V with the specified ripple current ratings and thermal characteristics. The FlatPack, Tabbed package with 1.000" lead spacing and chassis mount configuration ensures identical PCB layout compatibility.

Frequently Asked Questions (FAQ)

Q: Are MLP272M100EB1D and MLP272M100EB0D electrically identical?

A: Yes. Both parts have identical capacitance (2700 µF), voltage rating (100 V), tolerance (±20%), ESR (47 mOhm @ 120 Hz), lifetime (2000 Hrs @ 85°C), operating temperature range (-55°C to 85°C), and ripple current specifications (7.4 A @ 120 Hz, 8.7 A @ 20 kHz).

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. Both parts have identical mechanical specifications: FlatPack, Tabbed package, 1.000" (25.40mm) lead spacing, 3.000" L x 1.750" W (76.20mm x 44.45mm) dimensions, 0.500" (12.70mm) maximum seated height, and chassis mount configuration. No PCB layout modifications are required.

Q: What is the difference between the MLP272M100EB1D and MLP272M100EB0D part numbers?

A: The part numbers differ only in the final character designation (EB1D vs. EB0D). Both are variants within the Cornell Dubilier Electronics MLP series with identical performance and compliance specifications.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical compliance status: RoHS non-compliant, REACH Affected, ECCN EAR99, HTSUS 8532.22.0085, and Moisture Sensitivity Level 1 (Unlimited).

Q: Which part should be selected for new designs?

A: Both parts are active products suitable for new designs. Selection should be based on current inventory availability and procurement lead times. No technical preference exists between the two variants.

Q: What is the maximum ripple current these capacitors can handle?

A: The MLP272M100EB1D and MLP272M100EB0D are rated for 7.4 A ripple current at 120 Hz and 8.7 A ripple current at 20 kHz. Application-specific ripple current requirements must not exceed these values.

Q: Are these parts suitable for high-temperature applications?

A: These capacitors are rated for operation up to 85°C with a specified lifetime of 2000 hours at this temperature. Applications requiring extended operation at elevated temperatures should evaluate whether the 2000-hour lifetime meets the required service duration.

Q: What is the operating temperature range?

A: Both parts operate across a temperature range of -55°C to 85°C. Applications outside this range require alternative component selection.