MLP272M100EB1A Equivalent & Substitute Parts

Part Overview

The MLP272M100EB1A is a 2700 µF, 100 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in the MLP series. This FlatPack, Tabbed configuration is designed for general-purpose applications requiring high capacitance density with controlled equivalent series resistance. The part maintains Active product status with 806 units in current inventory. Substitute parts are identified based on identical electrical specifications and mechanical compatibility within the MLP series family.

Substiute Parts

MLP272M100EB1A

Cornell Dubilier Electronics (CDE)In Stock: 897MLP272M100EB1A Datasheet

Current PartRFQ

MLP272M100EB0D

Cornell Dubilier Electronics (CDE)In Stock: 847MLP272M100EB0D Datasheet

Parametric EquivalentRFQ

MLP272M100EB1D

Cornell Dubilier Electronics (CDE)In Stock: 913MLP272M100EB1D Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MLP272M100EB1A are identified within the Cornell Dubilier Electronics MLP series based on strict parametric equivalence. The substitution criteria are:

Critical Matching Parameters:

• Capacitance: 2700 µF (exact match required)
• Voltage Rating: 100 V (exact match required)
• Tolerance: ±20% (exact match required)
• ESR @ 120Hz: 47 mOhm (exact match required)
• Lifetime @ 85°C: 2000 Hrs (exact match required)
• Operating Temperature Range: -55°C to 85°C (exact match required)
• Ripple Current @ 120 Hz: 7.4 A (exact match required)
• Ripple Current @ 20 kHz: 8.7 A (exact match required)
• Package Configuration: FlatPack, Tabbed (exact match required)
• Lead Spacing: 1.000" / 25.40 mm (exact match required)
• Physical Dimensions: 3.000" L × 1.750" W (exact match required)
• Mounting Type: Chassis Mount (exact match required)

All identified substitute parts maintain identical electrical performance characteristics and mechanical compatibility with the main part number.

Parameter Comparison

Engineering Selection Recommendations

The MLP272M100EB1A, MLP272M100EB1D, and MLP272M100EB0D are parametrically equivalent aluminum electrolytic capacitors within the Cornell Dubilier Electronics MLP series. All three parts are Active products with identical electrical and mechanical specifications.

Compliance Considerations:

• All parts are RoHS non-compliant and REACH Affected
• All parts carry MSL Rating 1 (Unlimited moisture sensitivity level)
• All parts are classified under ECCN EAR99 and HTSUS 8532.22.0085

Selection Basis: Component selection among these three equivalent parts may be based on inventory availability. MLP272M100EB1D currently maintains the highest inventory level at 880 units, followed by MLP272M100EB1A at 806 units, and MLP272M100EB0D at 783 units. All parts are suitable for direct substitution in applications requiring 2700 µF, 100 V aluminum electrolytic capacitors with FlatPack, Tabbed configuration and Chassis Mount installation.

Frequently Asked Questions (FAQ)

Q: Are MLP272M100EB1A, MLP272M100EB1D, and MLP272M100EB0D fully interchangeable?

A: Yes. These three part numbers are parametrically equivalent. All electrical specifications, mechanical dimensions, lead spacing, and mounting configurations are identical. Direct substitution is supported without circuit modification.

Q: What determines substitution eligibility for MLP series 2700 µF, 100 V capacitors?

A: Substitution within this family requires exact matching of capacitance (2700 µF), voltage rating (100 V), tolerance (±20%), ESR (47 mOhm @ 120Hz), lifetime rating (2000 Hrs @ 85°C), operating temperature range (-55°C to 85°C), ripple current specifications (7.4 A @ 120 Hz, 8.7 A @ 20 kHz), package type (FlatPack, Tabbed), lead spacing (1.000"), physical dimensions (3.000" L × 1.750" W), and mounting type (Chassis Mount).

Q: Can these capacitors be used in new designs?

A: All three parts maintain Active product status and are suitable for new design implementations. However, designers must account for RoHS non-compliance and REACH Affected status in compliance documentation and supply chain planning.

Q: What is the significance of the different part number suffixes (EB1A, EB1D, EB0D)?

A: The suffixes indicate internal manufacturing or packaging variations within the MLP series. These variations do not affect electrical performance or mechanical compatibility. All three configurations deliver identical capacitance, voltage, ESR, and ripple current characteristics.

Q: Are there any thermal or environmental differences between these part numbers?

A: No. All three parts share identical operating temperature range (-55°C to 85°C), lifetime rating (2000 Hrs @ 85°C), and moisture sensitivity level (MSL 1 - Unlimited). Environmental performance is equivalent across all three configurations.

Q: What is the lead spacing and how does it affect PCB layout?

A: Lead spacing is 1.000" (25.40 mm) for all three parts. This measurement is critical for PCB footprint design and must be maintained during layout. The FlatPack, Tabbed package configuration with Chassis Mount installation requires appropriate mechanical clearance and electrical connection points on the circuit board.