MLP1N06CL Equivalent & Substitute Parts

Part Overview

The MLP1N06CL is a Power Switch/Driver N-Channel device in TO-220 packaging manufactured by onsemi under the SMARTDISCRETES™ series. This component functions as a 1:1 power driver with low-side N-channel output configuration, rated for 59V maximum load voltage and 590mOhm on-resistance. The product is currently obsolete, making equivalent and substitute parts necessary for ongoing system support and new design implementations. Substitute parts are selected based on matching package type, output configuration, voltage rating compatibility, and thermal characteristics.

Substiute Parts

MLP1N06CL

onsemiIn Stock: 48400MLP1N06CL Datasheet

Current PartRFQ

FDP047N08

onsemiIn Stock: 5480FDP047N08 Datasheet

SimilarRFQ

MTP3055VL

onsemiIn Stock: 15395MTP3055VL Datasheet

SimilarRFQ

NDP6060L

onsemiIn Stock: 1639NDP6060L Datasheet

SimilarRFQ

IRF2907ZPBF

International RectifierIn Stock: 4287IRF2907ZPBF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MLP1N06CL are selected based on the following critical parameters:

• Package Compatibility: All substitutes maintain TO-220-3 through-hole packaging for direct mechanical and electrical compatibility
• Output Configuration: All substitutes are N-Channel FETs with low-side switching capability
• Voltage Rating: Substitute parts must support minimum 59V drain-to-source voltage (Vdss) to maintain load voltage compatibility
• On-Resistance: Substitutes with lower Rds On values provide improved thermal performance and reduced power dissipation
• Temperature Range: Operating temperature ranges must encompass or exceed the original -50°C to 150°C specification
• Technology: All substitutes utilize MOSFET technology compatible with the original driver application

The four substitute parts (FDP047N08, MTP3055VL, NDP6060L, IRF2907ZPBF) meet these criteria with varying performance characteristics suited to different application requirements.

Parameter Comparison

Engineering Selection Recommendations

FDP047N08 (onsemi PowerTrench®): Active product status with ROHS3 compliance. Highest current rating (164A) and lowest on-resistance (4.7mOhm) among substitutes. Extended temperature range (-55°C to 175°C) exceeds original specification. Suitable for applications requiring maximum current handling and thermal efficiency.

MTP3055VL (onsemi): Active product status with ROHS3 compliance. Lowest current rating (12A) with moderate on-resistance (180mOhm). Extended temperature range (-65°C to 175°C). Appropriate for lower-current applications where the original MLP1N06CL specifications are sufficient.

NDP6060L (onsemi): Active product status with ROHS3 compliance. Mid-range current rating (48A) with excellent on-resistance (20mOhm). Extended temperature range (-65°C to 175°C). Balanced performance for general-purpose switching applications.

IRF2907ZPBF (International Rectifier): Active product status. Limited technical specification data provided. Requires verification of electrical parameters against application requirements before selection.

All active substitutes provide improved RoHS compliance compared to the obsolete MLP1N06CL. Selection should prioritize current requirements, thermal dissipation needs, and compliance mandates for the target application.

Frequently Asked Questions (FAQ)

Q: Can FDP047N08 directly replace MLP1N06CL in existing designs? A: FDP047N08 maintains TO-220-3 package compatibility and exceeds voltage and temperature specifications. Pin configuration must be verified for direct substitution. The significantly lower on-resistance (4.7mOhm vs 590mOhm) reduces power dissipation, which may require thermal design review.

Q: What is the primary difference between NDP6060L and MTP3055VL? A: NDP6060L provides 48A continuous drain current with 20mOhm on-resistance, while MTP3055VL provides 12A with 180mOhm on-resistance. Selection depends on application current requirements and acceptable power dissipation levels.

Q: Are all substitute parts RoHS compliant? A: FDP047N08, MTP3055VL, and NDP6060L are ROHS3 compliant. IRF2907ZPBF compliance status is not specified in available data. The original MLP1N06CL is RoHS non-compliant.

Q: Does package compatibility guarantee electrical compatibility? A: TO-220-3 package compatibility ensures mechanical fit and thermal interface compatibility. Electrical compatibility requires verification of pin configuration, voltage ratings, and current handling against specific circuit requirements.

Q: Which substitute offers the best thermal performance? A: FDP047N08 provides the lowest on-resistance (4.7mOhm) and highest power dissipation rating (268W), resulting in superior thermal performance for high-current applications.

Q: Can MTP3055VL be used in high-current applications? A: MTP3055VL is rated for 12A continuous drain current. Applications requiring higher current should use NDP6060L (48A) or FDP047N08 (164A).