MLP132M150EB1D Equivalent & Substitute Parts

Part Overview

The MLP132M150EB1D is a 1300 µF, 150 V aluminum electrolytic capacitor in FlatPack format manufactured by Cornell Dubilier Electronics (CDE). This component is classified as active in product status and serves general-purpose applications requiring bulk capacitance storage in chassis-mounted configurations. Equivalent substitute parts are identified for applications where component availability, inventory optimization, or supply chain continuity requires alternative sourcing of functionally identical units.

Substiute Parts

MLP132M150EB1D

Cornell Dubilier Electronics (CDE)In Stock: 669MLP132M150EB1D Datasheet

Current PartRFQ

MLP132M150EB1A

Cornell Dubilier Electronics (CDE)In Stock: 806MLP132M150EB1A Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The MLP132M150EB1D identifies one parametric equivalent substitute: MLP132M150EB1A. This substitution is valid based on identical electrical and mechanical parameters across all critical specifications:

Key Parameters Matching Substitution Criteria:

• Capacitance: 1300 µF (identical)
• Voltage Rating: 150 V (identical)
• Tolerance: ±20% (identical)
• ESR @ 120 Hz: 143 mOhm (identical)
• Lifetime @ Temperature: 2000 Hrs @ 85°C (identical)
• Operating Temperature Range: -55°C ~ 85°C (identical)
• Ripple Current @ 120 Hz: 4.2 A (identical)
• Ripple Current @ 20 kHz: 5 A (identical)
• Lead Spacing: 1.000" (25.40 mm) (identical)
• Physical Dimensions: 3.000" L × 1.750" W (76.20 mm × 44.45 mm) (identical)
• Height - Seated: 0.500" (12.70 mm) (identical)
• Package Type: FlatPack, Tabbed (identical)
• Mounting Type: Chassis Mount (identical)

Parameter Comparison

Engineering Selection Recommendations

Both MLP132M150EB1D and MLP132M150EB1A are active products manufactured by Cornell Dubilier Electronics. Selection between these parts is based on component availability and inventory considerations rather than electrical or mechanical differences. Both parts maintain identical RoHS non-compliant status and REACH compliance profile. Either part is suitable for direct substitution in applications designed for the MLP series 1300 µF, 150 V aluminum electrolytic capacitor in FlatPack configuration.

Frequently Asked Questions (FAQ)

Q: Can MLP132M150EB1A be used as a direct replacement for MLP132M150EB1D?

A: Yes. The MLP132M150EB1A meets all electrical and mechanical parameters of the MLP132M150EB1D. Identical capacitance, voltage rating, ESR, ripple current ratings, physical dimensions, and mounting specifications enable direct substitution without circuit redesign or board rework.

Q: Are there dimensional differences between these parts?

A: No. Both parts share identical physical dimensions: 3.000" L × 1.750" W (76.20 mm × 44.45 mm), height of 0.500" (12.70 mm), and lead spacing of 1.000" (25.40 mm). Both utilize FlatPack, Tabbed packaging and chassis mounting.

Q: Do these parts have different temperature performance?

A: No. Both parts operate across the same temperature range (-55°C ~ 85°C) and maintain identical lifetime ratings of 2000 Hrs @ 85°C.

Q: Are there compliance differences between the substitute parts?

A: No. Both MLP132M150EB1D and MLP132M150EB1A share identical RoHS non-compliant status and REACH compliance profile.

Q: What is the difference between MLP132M150EB1D and MLP132M150EB1A?

A: The parts are electrically and mechanically equivalent. Differences exist only in manufacturing lot codes or internal component variants not affecting performance or compatibility.