MLP132M150EB0D Equivalent & Substitute Parts

Part Overview

The MLP132M150EB0D is a 1300 µF, 150 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in the MLP series. This component is designed for general-purpose applications requiring high capacitance values in a compact FlatPack, Tabbed form factor. The part maintains an active product status with 1127 units currently in stock. Substitute parts are identified when identical electrical and mechanical parameters are required but alternative manufacturing batches or part variants are necessary to meet procurement, availability, or inventory requirements.

Substiute Parts

MLP132M150EB0D

Cornell Dubilier Electronics (CDE)In Stock: 1176MLP132M150EB0D Datasheet

Current PartRFQ

MLP132M150EB1A

Cornell Dubilier Electronics (CDE)In Stock: 806MLP132M150EB1A Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MLP132M150EB0D is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part MLP132M150EB1A qualifies as a direct equivalent based on the following criteria:

Electrical Parameters (Must Match Exactly):

• Capacitance: 1300 µF
• Voltage Rating: 150 V
• Tolerance: ±20%
• ESR: 143 mOhm @ 120 Hz
• Lifetime: 2000 Hrs @ 85°C
• Operating Temperature Range: -55°C to 85°C
• Ripple Current @ 120 Hz: 4.2 A
• Ripple Current @ 20 kHz: 5 A

Mechanical Parameters (Must Match Exactly):

• Package Type: FlatPack, Tabbed
• Lead Spacing: 1.000" (25.40 mm)
• Dimensions: 3.000" L x 1.750" W (76.20 mm x 44.45 mm)
• Height - Seated (Max): 0.500" (12.70 mm)
• Mounting Type: Chassis Mount
• Polarization: Polar

Both parts are manufactured by Cornell Dubilier Electronics (CDE) within the MLP series and maintain active product status. Substitution is valid only when all parameters listed above remain unchanged in the application circuit.

Parameter Comparison

Engineering Selection Recommendations

The MLP132M150EB1A is a direct parametric equivalent to the MLP132M150EB0D and is suitable for substitution in applications where the MLP132M150EB0D is specified. Both parts are manufactured by Cornell Dubilier Electronics (CDE) and maintain identical electrical performance characteristics, mechanical dimensions, and environmental ratings.

Selection Basis:

Both parts share identical compliance profiles:

• RoHS non-compliant status
• REACH Affected designation
• Moisture Sensitivity Level 1 (Unlimited)
• ECCN: EAR99
• HTSUS: 8532.22.0085

The choice between MLP132M150EB0D and MLP132M150EB1A should be based on inventory availability and procurement lead time requirements. The MLP132M150EB0D currently maintains higher stock levels (1127 units) compared to MLP132M150EB1A (763 units). Both parts are active products with no planned discontinuation.

Frequently Asked Questions (FAQ)

Q: Can MLP132M150EB1A be used as a direct replacement for MLP132M150EB0D?

A: Yes. The MLP132M150EB1A is a direct parametric equivalent. All electrical specifications, mechanical dimensions, lead spacing, and environmental ratings are identical. Both parts are manufactured by Cornell Dubilier Electronics (CDE) within the MLP series.

Q: Are there any differences in the physical package between these two parts?

A: No. Both parts use the FlatPack, Tabbed package with identical dimensions (3.000" L x 1.750" W, 76.20 mm x 44.45 mm), lead spacing (1.000", 25.40 mm), and maximum seated height (0.500", 12.70 mm). Chassis mount orientation is identical.

Q: Do these parts have the same electrical performance?

A: Yes. Capacitance (1300 µF), voltage rating (150 V), tolerance (±20%), ESR (143 mOhm @ 120 Hz), ripple current ratings (4.2 A @ 120 Hz, 5 A @ 20 kHz), and lifetime (2000 Hrs @ 85°C) are identical across both parts.

Q: What is the operating temperature range for both parts?

A: Both MLP132M150EB0D and MLP132M150EB1A operate across -55°C to 85°C. The lifetime specification of 2000 hours applies at 85°C.

Q: Are there compliance or regulatory differences between these parts?

A: No. Both parts share identical compliance status: RoHS non-compliant, REACH Affected, MSL 1 (Unlimited), ECCN EAR99, and HTSUS 8532.22.0085.

Q: Which part should I select based on availability?

A: Selection should be based on procurement requirements and inventory status. MLP132M150EB0D has 1127 units in stock, while MLP132M150EB1A has 763 units available. Both are active products with no discontinuation notices.

Q: Can these parts be used interchangeably in PCB designs?

A: Yes. The identical lead spacing (1.000", 25.40 mm) and FlatPack, Tabbed configuration ensure mechanical and electrical interchangeability in chassis mount applications.