Equivalent & Substitute Parts for MLP113M050EB1D

Part Overview

The MLP113M050EB1D is an 11000 µF, 50 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in the MLP series. This FlatPack, Tabbed configuration is designed for general purpose applications requiring high capacitance density in a compact chassis mount form factor. The part is currently Active in product status with 1035 pieces in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

MLP113M050EB1D

Cornell Dubilier Electronics (CDE)In Stock: 1100MLP113M050EB1D Datasheet

Current PartRFQ

MLP113M050EB0D

Cornell Dubilier Electronics (CDE)In Stock: 1126MLP113M050EB0D Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MLP113M050EB1D is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance value: 11000 µF (exact match required)
• Voltage rating: 50 V (exact match required)
• Tolerance: ±20% (exact match required)
• ESR: 36 mOhm @ 120 Hz (exact match required)
• Lifetime: 2000 Hrs @ 85°C (exact match required)
• Operating temperature range: -55°C to 85°C (exact match required)
• Ripple current specifications at both 120 Hz and 20 kHz (exact match required)

Mechanical Parameters:

• Lead spacing: 1.000" (25.40 mm) (exact match required)
• Physical dimensions: 3.000" L x 1.750" W (76.20 x 44.45 mm) (exact match required)
• Height seated: 0.500" (12.70 mm) maximum (exact match required)
• Package type: FlatPack, Tabbed (exact match required)
• Mounting configuration: Chassis Mount (exact match required)

Compliance Parameters:

• Series designation: MLP (exact match required)
• Manufacturer: Cornell Dubilier Electronics (CDE)
• Product status: Active

Only parts meeting all specified parameters are classified as direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The MLP113M050EB0D is a direct parametric equivalent to the MLP113M050EB1D. Both parts are manufactured by Cornell Dubilier Electronics within the MLP series and share identical electrical specifications, mechanical dimensions, and compliance certifications.

Selection Basis:

Both parts carry Active product status, indicating ongoing manufacturing support and availability. The MLP113M050EB0D currently has 1076 pieces in inventory compared to 1035 pieces for the MLP113M050EB1D, providing equivalent supply assurance.

Compliance profiles are identical: both are RoHS non-compliant, REACH Affected, with MSL rating of 1 (Unlimited moisture sensitivity level). ECCN classification (EAR99) and HTSUS code (8532.22.0085) are consistent across both parts.

Selection between these two parts may be based on inventory availability, procurement lead times, or supply chain logistics, as no electrical or mechanical differentiation exists.

Frequently Asked Questions (FAQ)

Q: Can MLP113M050EB0D replace MLP113M050EB1D in existing designs?

A: Yes. The MLP113M050EB0D is a direct parametric equivalent. All electrical characteristics, mechanical dimensions, lead spacing, and mounting configurations are identical. No circuit redesign or PCB layout modification is required.

Q: Are there any differences in the FlatPack, Tabbed package configuration between these parts?

A: No. Both parts use identical FlatPack, Tabbed packaging with 1.000" (25.40 mm) lead spacing, 3.000" x 1.750" (76.20 x 44.45 mm) dimensions, and 0.500" (12.70 mm) maximum seated height. Chassis mount orientation is identical.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both MLP113M050EB1D and MLP113M050EB0D share identical RoHS status (non-compliant), REACH status (Affected), MSL rating (1 - Unlimited), ECCN classification (EAR99), and HTSUS code (8532.22.0085).

Q: What are the critical electrical parameters that define substitution eligibility?

A: Substitution requires exact matching of: 11000 µF capacitance, 50 V voltage rating, ±20% tolerance, 36 mOhm ESR @ 120 Hz, 2000 Hrs lifetime @ 85°C, -55°C to 85°C operating range, and ripple current specifications (8.3 A @ 120 Hz, 9.6 A @ 20 kHz).

Q: Can these parts be used interchangeably in high-ripple current applications?

A: Yes. Both parts are rated for identical ripple current specifications: 8.3 A at 120 Hz and 9.6 A at 20 kHz. Thermal performance and ESR characteristics are equivalent.

Q: What is the significance of the part number suffix difference (EB1D vs. EB0D)?

A: The suffix variation does not indicate electrical or mechanical differences. Both parts are parametrically equivalent and interchangeable. The suffix may reflect internal manufacturing or revision tracking by Cornell Dubilier Electronics.