MLP113M050EB0C Equivalent & Substitute Parts

Part Overview

The MLP113M050EB0C is an 11000 µF, 50 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in FlatPack configuration. This component is classified as Active product status and is designed for general-purpose applications requiring high capacitance density in a compact through-hole package. The part operates across a temperature range of -55°C to 85°C with a rated lifetime of 2000 hours at 85°C. Substitute parts are identified when electrical parameters, mechanical dimensions, and package specifications remain identical or functionally equivalent within the defined tolerance ranges.

Substiute Parts

MLP113M050EB0C

Cornell Dubilier Electronics (CDE)In Stock: 1178MLP113M050EB0C Datasheet

Current PartRFQ

MLP113M050EB1C

Cornell Dubilier Electronics (CDE)In Stock: 2219MLP113M050EB1C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MLP113M050EB0C are identified based on strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Capacitance value: 11000 µF (exact match)
• Voltage rating: 50 V (exact match)
• Tolerance: ±20% (exact match)
• ESR @ 120 Hz: 36 mOhm (exact match)
• Lifetime @ 85°C: 2000 Hrs (exact match)
• Ripple current specifications @ 120 Hz and 20 kHz (exact match)

Mechanical Equivalence Criteria:

• Package type: FlatPack (exact match)
• Mounting type: Through Hole (exact match)
• Lead spacing: 1.000" / 25.40 mm (exact match)
• Physical dimensions: 3.000" L x 1.750" W / 76.20 x 44.45 mm (exact match)
• Height seated (max): 0.500" / 12.70 mm (exact match)

Environmental & Compliance Criteria:

• Operating temperature range: -55°C to 85°C (exact match)
• Polarization: Polar (exact match)
• Series designation: MLP (exact match)
• Manufacturer: Cornell Dubilier Electronics (CDE)

Substitution is valid only when all parameters listed above are identical. No parameter deviation is permitted.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: MLP113M050EB0C

The MLP113M050EB0C is the baseline reference part with 1068 pieces in current inventory stock. This part carries Active product status and is suitable for immediate deployment in applications requiring 11000 µF capacitance at 50 V with FlatPack through-hole configuration.

Equivalent Substitute: MLP113M050EB1C

The MLP113M050EB1C is a direct parametric equivalent with identical electrical and mechanical specifications. This part carries Active product status and has 2200 pieces in current inventory stock. Selection between MLP113M050EB0C and MLP113M050EB1C is based on inventory availability and supply chain requirements, as both parts are functionally interchangeable.

Compliance Considerations:

Both parts share identical RoHS non-compliance status and REACH Affected designation. Component selection must account for end-application regulatory requirements. Both parts carry MSL Level 1 (Unlimited) moisture sensitivity rating, indicating no special moisture handling requirements during storage or assembly.

Inventory Availability:

MLP113M050EB1C offers higher current stock availability (2200 pcs) compared to MLP113M050EB0C (1068 pcs), which may influence selection for high-volume production requirements.

Frequently Asked Questions (FAQ)

Q: Can MLP113M050EB1C be used as a direct replacement for MLP113M050EB0C?

A: Yes. Both parts are parametrically identical across all electrical, mechanical, and environmental specifications. Direct substitution is valid without circuit modification or re-qualification.

Q: What are the key differences between these two part numbers?

A: There are no functional differences. The parts differ only in manufacturing batch designation (EB0C vs. EB1C) and current inventory levels. Both are manufactured by Cornell Dubilier Electronics in the MLP series.

Q: Are the physical dimensions identical?

A: Yes. Both parts have identical FlatPack dimensions of 3.000" L x 1.750" W (76.20 x 44.45 mm) with 0.500" (12.70 mm) maximum seated height and 1.000" (25.40 mm) lead spacing. PCB layout and mounting hole patterns are identical.

Q: Do these parts have identical electrical performance?

A: Yes. Both parts specify 11000 µF capacitance at 50 V with ±20% tolerance, 36 mOhm ESR @ 120 Hz, 2000 hour lifetime @ 85°C, and identical ripple current ratings (8.3 A @ 120 Hz, 9.6 A @ 20 kHz).

Q: What is the operating temperature range for both parts?

A: Both parts operate across -55°C to 85°C. Rated lifetime is 2000 hours at the maximum operating temperature of 85°C.

Q: Are there any moisture sensitivity or handling differences?

A: No. Both parts carry MSL Level 1 (Unlimited) rating, indicating no special moisture control requirements during storage, handling, or assembly processes.

Q: What is the RoHS compliance status?

A: Both parts are RoHS non-compliant. Applications requiring RoHS compliance must source alternative components from the manufacturer's compliant product lines.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. No design changes, circuit modifications, or re-qualification testing are required when substituting between MLP113M050EB0C and MLP113M050EB1C. Both parts are electrically and mechanically equivalent.