MLP102M200EB1D Equivalent & Substitute Parts

Part Overview

The MLP102M200EB1D is a 1000 µF, 200 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in FlatPack, Tabbed configuration. This component is classified as Active product status and is designed for general-purpose applications requiring high-capacitance energy storage in chassis-mount configurations. The part operates across a temperature range of -55°C to 85°C with a rated lifetime of 2000 hours at 85°C. Identifying equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and maintain performance specifications across production batches and procurement cycles.

Substiute Parts

MLP102M200EB1D

Cornell Dubilier Electronics (CDE)In Stock: 1147MLP102M200EB1D Datasheet

Current PartRFQ

MLP102M200EB1A

Cornell Dubilier Electronics (CDE)In Stock: 1113MLP102M200EB1A Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of aluminum electrolytic capacitors is determined by strict equivalence across electrical and mechanical parameters. For the MLP102M200EB1D, substitute parts must satisfy the following criteria:

Electrical Parameters (Non-Negotiable):

• Capacitance: 1000 µF (exact match)
• Voltage Rating: 200 V (exact match or higher)
• Tolerance: ±20% (exact match)
• ESR: 158 mOhm @ 120 Hz (exact match)
• Lifetime: 2000 Hrs @ 85°C (exact match)
• Operating Temperature: -55°C to 85°C (exact match or wider range)
• Ripple Current @ 120 Hz: 3.8 A (exact match)
• Ripple Current @ 20 kHz: 5 A (exact match)

Mechanical Parameters (Non-Negotiable):

• Lead Spacing: 1.000" (25.40 mm) (exact match)
• Physical Dimensions: 3.000" L x 1.750" W (76.20 x 44.45 mm) (exact match)
• Height - Seated (Max): 0.500" (12.70 mm) (exact match)
• Mounting Type: Chassis Mount (exact match)
• Package / Case: FlatPack, Tabbed (exact match)
• Polarization: Polar (exact match)

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The MLP102M200EB1D and MLP102M200EB1A are parametric equivalents with identical electrical and mechanical specifications. Both parts are manufactured by Cornell Dubilier Electronics within the MLP series and maintain Active product status. Selection between these two parts may be based on:

Inventory Availability: MLP102M200EB1D has 1061 pieces in stock; MLP102M200EB1A has 1076 pieces in stock. Both quantities support production requirements.

Compliance Considerations: Both parts share identical RoHS non-compliant status and REACH Affected classification. Design teams must account for these regulatory designations in applications subject to environmental compliance requirements.

Certification Alignment: Both parts carry identical ECCN (EAR99) and HTSUS (8532.22.0085) classifications, ensuring consistent export control and tariff treatment.

Operational Equivalence: The identical ESR, ripple current ratings, lifetime specification, and temperature operating range ensure direct functional substitution without circuit redesign or performance degradation.

Frequently Asked Questions (FAQ)

Q: Can MLP102M200EB1A be used as a direct replacement for MLP102M200EB1D?

A: Yes. Both parts are parametric equivalents with identical capacitance (1000 µF), voltage rating (200 V), ESR (158 mOhm @ 120 Hz), ripple current specifications, physical dimensions, and mounting configuration. No circuit modifications are required.

Q: Are there any differences in the FlatPack, Tabbed package between these two parts?

A: No. Both parts use identical FlatPack, Tabbed packaging with matching lead spacing (1.000" / 25.40 mm), physical dimensions (3.000" L x 1.750" W / 76.20 x 44.45 mm), and maximum seated height (0.500" / 12.70 mm). PCB layout and mounting procedures remain unchanged.

Q: What is the significance of the part number suffix (EB1D vs. EB1A)?

A: The suffix designates internal manufacturing or batch variations within the MLP series. Both suffixes represent the same electrical and mechanical specifications as defined by Cornell Dubilier Electronics. The suffix does not indicate performance differences.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both MLP102M200EB1D and MLP102M200EB1A share identical RoHS non-compliant status, REACH Affected classification, ECCN (EAR99), and HTSUS (8532.22.0085) codes. Compliance considerations apply equally to both parts.

Q: What is the ESR specification and why is it critical for substitution?

A: ESR (Equivalent Series Resistance) is 158 mOhm @ 120 Hz for both parts. ESR directly affects ripple current handling, thermal performance, and circuit stability. Identical ESR values ensure equivalent thermal and electrical behavior in power supply and filtering applications.

Q: Are there any temperature-related performance differences?

A: No. Both parts operate across -55°C to 85°C with a rated lifetime of 2000 hours at 85°C. Temperature performance is identical, ensuring equivalent reliability across the full operating range.

Q: Can these parts be used in applications requiring RoHS compliance?

A: No. Both MLP102M200EB1D and MLP102M200EB1A are RoHS non-compliant. Applications subject to RoHS requirements must use alternative components with RoHS-compliant certification.