MLP102M200EB0C Equivalent & Substitute Parts

Part Overview

The MLP102M200EB0C is a 1000 µF, 200 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in FlatPack configuration. This component is classified as Active product status and serves general-purpose applications requiring high-capacitance energy storage in through-hole mounting configurations. The part operates across a temperature range of -55°C to 85°C with a rated lifetime of 2000 hours at 85°C. Substitute parts are identified when electrical characteristics, mechanical dimensions, and packaging specifications remain identical to the main part number, ensuring direct functional equivalence in circuit applications.

Substiute Parts

MLP102M200EB0C

Cornell Dubilier Electronics (CDE)In Stock: 877MLP102M200EB0C Datasheet

Current PartRFQ

MLP102M200EB1C

Cornell Dubilier Electronics (CDE)In Stock: 1115MLP102M200EB1C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MLP102M200EB0C is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must match the following criteria:

Electrical Parameters (Must Match Exactly):

• Capacitance: 1000 µF
• Voltage Rating: 200 V
• Tolerance: ±20%
• ESR: 158 mOhm @ 120 Hz
• Lifetime: 2000 Hrs @ 85°C
• Operating Temperature: -55°C ~ 85°C
• Ripple Current @ 120 Hz: 3.8 A
• Ripple Current @ 20 kHz: 5 A

Mechanical Parameters (Must Match Exactly):

• Lead Spacing: 1.000" (25.40 mm)
• Physical Dimensions: 3.000" L x 1.750" W (76.20 mm x 44.45 mm)
• Height - Seated (Max): 0.500" (12.70 mm)
• Mounting Type: Through Hole
• Package Type: FlatPack

Product Classification:

• Series: MLP
• Polarization: Polar
• Applications: General Purpose

The MLP102M200EB1C meets all specified criteria and is classified as a parametric equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the MLP102M200EB0C and MLP102M200EB1C are Active product status components manufactured by Cornell Dubilier Electronics within the MLP series. Selection between these parts is based on availability and inventory considerations rather than technical differentiation.

Compliance and Certification Status:

• Both parts carry identical RoHS non-compliant designation
• Both parts are REACH Affected
• Both parts are classified under ECCN EAR99
• Both parts share identical HTSUS classification: 8532.22.0085
• Both parts maintain MSL Level 1 (Unlimited moisture sensitivity)

Inventory Availability:

• MLP102M200EB0C: 823 Pcs New Original In Stock
• MLP102M200EB1C: 1,020 Pcs New Original In Stock

Selection should be based on supply chain requirements and delivery timelines. Both parts deliver identical electrical performance and mechanical compatibility in through-hole FlatPack applications.

Frequently Asked Questions (FAQ)

Q: Can MLP102M200EB1C be used as a direct replacement for MLP102M200EB0C?

A: Yes. The MLP102M200EB1C is a parametric equivalent substitute. All electrical specifications, mechanical dimensions, lead spacing, and package configuration are identical. Direct substitution in circuit board designs is supported without modification to PCB layouts or component footprints.

Q: Are there differences in performance between these two part numbers?

A: No. Both parts deliver identical capacitance (1000 µF), voltage rating (200 V), ESR (158 mOhm @ 120 Hz), ripple current ratings, and operating temperature range (-55°C ~ 85°C). Lifetime rating at 85°C is 2000 hours for both parts.

Q: Do these parts require different PCB footprints?

A: No. Both parts share identical mechanical specifications: 1.000" (25.40 mm) lead spacing, 3.000" L x 1.750" W (76.20 mm x 44.45 mm) body dimensions, and 0.500" (12.70 mm) maximum seated height. FlatPack configuration is identical for both part numbers.

Q: What is the difference between the MLP102M200EB0C and MLP102M200EB1C part numbers?

A: The part numbers differ only in the suffix designation (EB0C versus EB1C). This suffix variation does not reflect changes in electrical performance, mechanical configuration, or functional capability. Both parts are manufactured by Cornell Dubilier Electronics within the MLP series and maintain identical specifications.

Q: Are there compliance or certification differences?

A: No. Both parts carry identical compliance status: RoHS non-compliant, REACH Affected, ECCN EAR99, and MSL Level 1. Regulatory classification is identical for both part numbers.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection should be based on current inventory availability and supply chain lead times. Both parts are Active product status and deliver identical performance characteristics.

Q: Can these parts be mixed in the same production batch?

A: Yes. Since both parts are parametric equivalents with identical electrical and mechanical specifications, they can be used interchangeably within the same circuit application and production environment.