MLP0805-601 Equivalent & Substitute Parts

Part Overview

The MLP0805-601 is a single-line power line ferrite bead manufactured by Ferroxcube in 0805 (2012 Metric) surface mount package. This component provides electromagnetic interference (EMI) suppression for power distribution circuits with an impedance of 600 Ohms at 100 MHz and a maximum current rating of 2A. The part is actively produced and RoHS3 compliant, making it suitable for modern electronic applications requiring power line filtering in compact form factors.

Equivalent substitute parts may be required due to supply chain availability, inventory constraints, or procurement preferences while maintaining identical electrical and mechanical performance.

Substiute Parts

MLP0805-601

FerroxcubeIn Stock: 755MLP0805-601 Datasheet

Current PartRFQ

CTCB0805F-601P

Central TechnologiesIn Stock: 12379CTCB0805F-601P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MLP0805-601 is determined by strict equivalence across the following critical parameters:

• Impedance specification: 600 Ohms @ 100 MHz (exact match required)
• Current rating: 2A maximum (equal or greater acceptable)
• DC resistance: 100mOhm maximum (equal or lower acceptable)
• Package type: 0805 (2012 Metric) surface mount (exact match required)
• Operating temperature range: -40°C ~ 125°C (equal or wider range acceptable)
• Filter classification: Power line ferrite bead, single-line configuration (exact match required)
• Compliance: RoHS3 compliant (equal or higher standard acceptable)

The CTCB0805F-601P from Central Technologies meets all substitution criteria and is classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the MLP0805-601 and CTCB0805F-601P are active production components with RoHS3 compliance certification. Selection between these parts should be based on:

• Procurement availability and lead time requirements
• Inventory stock levels and supply chain positioning
• Manufacturer qualification requirements specific to your organization
• Cost considerations within approved component lists

No electrical or mechanical performance differentiation exists between these parts based on provided specifications. Both components are suitable for direct substitution in power line EMI filtering applications requiring 600 Ohm impedance at 100 MHz with 2A current capacity in 0805 surface mount packages.

Frequently Asked Questions (FAQ)

Q: Can CTCB0805F-601P be used as a direct replacement for MLP0805-601?

A: Yes. Both parts share identical electrical specifications (600 Ohms @ 100 MHz, 2A current rating, 100mOhm DCR), identical package dimensions (0805 / 2012 Metric), and identical operating temperature range (-40°C ~ 125°C). Both are RoHS3 compliant and actively produced.

Q: Are there any dimensional differences between these parts?

A: Both parts have identical maximum height (0.043" / 1.10mm) and length (0.079" / 2.00mm). Width specifications are 0.049" (1.25mm) for MLP0805-601 and 0.047" (1.20mm) for CTCB0805F-601P. These minor width variations are within standard 0805 package tolerances and do not affect PCB layout or assembly compatibility.

Q: What determines if a ferrite bead can substitute for another?

A: Substitution requires matching impedance at the specified frequency, current rating capacity, DC resistance limits, package type, and operating temperature range. For power line applications, the filter type and number of lines must also match. All these parameters are identical between MLP0805-601 and CTCB0805F-601P.

Q: Are both parts suitable for high-temperature applications?

A: Yes. Both parts are rated for operation across -40°C to 125°C, supporting applications requiring extended temperature performance within this range.

Q: What is the significance of RoHS3 compliance for both parts?

A: RoHS3 compliance indicates both parts meet current European Union Restriction of Hazardous Substances regulations, making them suitable for applications subject to environmental and regulatory compliance requirements.