MLF2012E6R8MT Equivalent & Substitute Parts

Part Overview

The MLF2012E6R8MT is a 6.8 µH shielded multilayer inductor manufactured by TDK Corporation in 0805 (2012 Metric) surface mount package. This component is rated for 15 mA maximum current with 650mOhm maximum DC resistance and operates across -55°C to 125°C. The part carries a "Not For New Designs" status, making identification of suitable alternatives essential for ongoing production and new design implementations.

Substiute Parts

MLF2012E6R8MT

TDK CorporationIn Stock: 1065MLF2012E6R8MT Datasheet

Current PartRFQ

MLF2012E6R8KT000

TDK CorporationIn Stock: 2150MLF2012E6R8KT000 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MLF2012E6R8MT is determined by strict equivalence across the following critical parameters:

• Inductance value: 6.8 µH
• Current rating: 15 mA minimum
• DC resistance: 650mOhm maximum
• Package type: 0805 (2012 Metric) surface mount
• Core material: Ferrite shielded construction
• Operating temperature range: -55°C to 125°C minimum
• Self-resonant frequency: 40MHz
• Q factor: 50 @ 4MHz

The MLF2012E6R8KT000 meets all substitution criteria as a direct equivalent from the same manufacturer series with identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

The MLF2012E6R8KT000 is the qualified substitute for MLF2012E6R8MT applications. Both parts maintain identical electrical performance, mechanical compatibility, and environmental specifications. The primary distinction is product lifecycle status: MLF2012E6R8MT is designated "Not For New Designs," while MLF2012E6R8KT000 carries "Active" status, making it the appropriate choice for new production and design implementations.

The MLF2012E6R8KT000 offers improved inductance tolerance (±10% versus ±20%), providing tighter performance margins in applications requiring precision inductance values. Both components satisfy ROHS3 compliance and REACH requirements, with identical moisture sensitivity classification and thermal operating range.

Frequently Asked Questions (FAQ)

Q: Can MLF2012E6R8KT000 replace MLF2012E6R8MT in existing designs?

A: Yes. Both parts share identical inductance (6.8 µH), current rating (15 mA), DC resistance (650mOhm max), package dimensions (0805/2012 Metric), and operating temperature range (-55°C to 125°C). Electrical and mechanical compatibility is complete.

Q: What is the difference between these two part numbers?

A: The primary differences are inductance tolerance (±10% for KT000 versus ±20% for MT) and product status (Active versus Not For New Designs). Electrical performance and physical specifications are equivalent.

Q: Are there any PCB layout or assembly considerations when switching between these parts?

A: No. Both components use identical 0805 (2012 Metric) surface mount packaging with matching footprint dimensions (2.00mm L x 1.25mm W) and maximum seated height (1.45mm). No PCB redesign or assembly process modification is required.

Q: Do both parts meet the same compliance standards?

A: Yes. Both MLF2012E6R8MT and MLF2012E6R8KT000 are ROHS3 compliant, REACH unaffected, and classified as Moisture Sensitivity Level 1 (Unlimited).

Q: Which part should be specified for new designs?

A: MLF2012E6R8KT000 should be specified for new designs due to its Active product status. MLF2012E6R8MT is designated "Not For New Designs" and should be reserved for legacy system support only.