MLF1005LR82KT Equivalent & Substitute Parts

Part Overview

The MLF1005LR82KT is a 820 nH shielded multilayer inductor manufactured by TDK Corporation, designed for surface mount applications in the 0402 (1005 Metric) package. This component features a 35 mA current rating, 590 mOhm maximum DC resistance, and operates across the temperature range of -40°C to 85°C. The part is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing design requirements and procurement continuity.

Substiute Parts

MLF1005LR82KT

TDK CorporationIn Stock: 1074MLF1005LR82KT Datasheet

Current PartRFQ

MLF1005GR82KT

TDK CorporationIn Stock: 1160MLF1005GR82KT Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MLF1005LR82KT is determined by strict equivalence across the following critical parameters:

• Inductance value: 820 nH with ±10% tolerance
• Package / Case: 0402 (1005 Metric) form factor
• Shielding type: Shielded construction
• Material - Core: Ferrite composition
• Mounting Type: Surface Mount
• DC Resistance: 590 mOhm maximum specification

The MLF1005GR82KT qualifies as a direct substitute based on matching all critical electrical and mechanical parameters. Variations in current rating, operating temperature range, and product status do not preclude substitution when the application requirements fall within the substitute part's specifications.

Parameter Comparison

Engineering Selection Recommendations

The MLF1005GR82KT is the qualified substitute for the obsolete MLF1005LR82KT. Both components maintain identical inductance, tolerance, DC resistance, package dimensions, and core material specifications. The substitute part offers enhanced specifications in current rating (40 mA versus 35 mA) and extended operating temperature range (-55°C to 125°C versus -40°C to 85°C), providing superior performance margins for most applications.

The MLF1005GR82KT carries Active product status and maintains full compliance with ROHS3 and REACH requirements, ensuring long-term availability and regulatory alignment. Selection of the substitute part is appropriate for applications where the original MLF1005LR82KT specifications are met or exceeded by the substitute's electrical and thermal characteristics.

Frequently Asked Questions (FAQ)

Q: Can MLF1005GR82KT replace MLF1005LR82KT in existing designs?

A: Yes. Both parts share identical inductance (820 nH), tolerance (±10%), DC resistance (590 mOhm max), shielding type, core material, and 0402 package dimensions. The substitute meets or exceeds all critical electrical parameters of the original part.

Q: What are the differences between these two parts?

A: The MLF1005GR82KT provides higher current rating (40 mA versus 35 mA), improved Q factor (30 versus 25 at 10 MHz), wider operating temperature range (-55°C to 125°C versus -40°C to 85°C), and Active product status compared to the obsolete MLF1005LR82KT.

Q: Are the physical dimensions identical?

A: Yes. Both parts are packaged in 0402 (1005 Metric) with identical length (0.039" / 1.00mm), width (0.020" / 0.50mm), and maximum seated height (0.022" / 0.55mm).

Q: Do both parts meet the same compliance standards?

A: Yes. Both MLF1005LR82KT and MLF1005GR82KT are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the packaging difference between these parts?

A: The main part (MLF1005LR82KT) packaging is not specified in the provided data. The substitute (MLF1005GR82KT) is supplied in Tape & Reel (TR) packaging.