MLASE219JB5106KTNA01 Equivalent & Substitute Parts

Part Overview

The MLASE219JB5106KTNA01 is a 10 µF ±10% 16V ceramic capacitor manufactured by Taiyo Yuden in the X5R temperature coefficient classification. This surface mount multilayer ceramic capacitor (MLCC) is packaged in 0805 (2012 Metric) form factor and is designed for medical and non-critical applications. The part maintains Active product status with full RoHS3 compliance and MSL 1 rating. Substitute parts are identified to provide design flexibility, supply chain alternatives, and inventory optimization while maintaining electrical and mechanical compatibility.

Substiute Parts

MLASE219JB5106KTNA01

Taiyo YudenIn Stock: 808MLASE219JB5106KTNA01 Datasheet

Current PartRFQ

CL21A106KOCLRNC

Samsung Electro-MechanicsIn Stock: 4906CL21A106KOCLRNC Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MLASE219JB5106KTNA01 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance value: 10 µF
• Tolerance: ±10%
• Rated voltage: 16V
• Temperature coefficient: X5R
• Operating temperature range: -55°C ~ 85°C

Mechanical Parameters:

• Package classification: 0805 (2012 Metric)
• Mounting type: Surface Mount, MLCC
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Maximum thickness: 0.037" (0.95mm)

Compliance Parameters:

• RoHS3 compliance
• MSL 1 rating
• REACH unaffected status

Substitute parts must match all electrical, mechanical, and compliance parameters without exception. Substitutes are grouped as parametric equivalents when all specified parameters align with the main part.

Parameter Comparison

Engineering Selection Recommendations

Both the MLASE219JB5106KTNA01 and CL21A106KOCLRNC are Active status products with full RoHS3 compliance and REACH unaffected certification. Selection between these parts is based on availability, supply chain considerations, and inventory requirements rather than electrical or mechanical differentiation.

The MLASE219JB5106KTNA01 (Taiyo Yuden) is specified for medical and non-critical applications. The CL21A106KOCLRNC (Samsung Electro-Mechanics) is designated for general purpose applications. Both parts satisfy identical electrical specifications and physical constraints, making them functionally interchangeable in circuit designs where the rated parameters are required.

Current inventory levels show 734 units of the Taiyo Yuden part and 4,874 units of the Samsung Electro-Mechanics part available as new original stock.

Frequently Asked Questions (FAQ)

Q: Can CL21A106KOCLRNC replace MLASE219JB5106KTNA01 in a circuit design?

A: Yes. Both parts are parametric equivalents with identical capacitance (10 µF), tolerance (±10%), rated voltage (16V), temperature coefficient (X5R), operating temperature range (-55°C ~ 85°C), package (0805 / 2012 Metric), and physical dimensions. They are electrically and mechanically interchangeable.

Q: Are there differences in application suitability between these parts?

A: The MLASE219JB5106KTNA01 is specified for medical and non-critical applications, while the CL21A106KOCLRNC is designated for general purpose applications. Both parts meet identical electrical and compliance requirements. Application selection depends on design requirements beyond the specified parameters.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the MLASE219JB5106KTNA01 and CL21A106KOCLRNC are ROHS3 compliant and REACH unaffected.

Q: What is the physical footprint compatibility between these parts?

A: Both parts use identical 0805 (2012 Metric) packaging with dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm) and maximum thickness of 0.037" (0.95mm). They are footprint compatible for PCB layout and assembly.

Q: Can these parts be used interchangeably in production?

A: Yes, provided that circuit design requirements do not mandate a specific manufacturer. Both parts meet all specified electrical, mechanical, and compliance parameters. Substitution is valid for direct replacement in manufacturing and design applications.