ML03V11R8BAT2A Equivalent & Substitute Parts

Part Overview

The ML03V11R8BAT2A is a 1.8 pF ceramic capacitor manufactured by KYOCERA AVX, rated for 250V with C0G/NP0 temperature coefficient characteristics. This component is designed for RF, microwave, and high-frequency applications requiring stable capacitance across temperature ranges from -55°C to 125°C. The part is currently in active production status with 839 units in stock. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the 0603 (1608 Metric) package format.

Substiute Parts

ML03V11R8BAT2A

KYOCERA AVXIn Stock: 881ML03V11R8BAT2A Datasheet

Current PartRFQ

600S1R8BW250XT

American Technical CeramicsIn Stock: 40502600S1R8BW250XT Datasheet

DirectRFQ

CBR06C189BAGAC

KEMETIn Stock: 6289CBR06C189BAGAC Datasheet

DirectRFQ

GQM1875C2E1R8BB12D

Murata ElectronicsIn Stock: 8380GQM1875C2E1R8BB12D Datasheet

DirectRFQ

QSCP251Q1R8B1GV001T

Johanson Technology Inc.In Stock: 40310QSCP251Q1R8B1GV001T Datasheet

DirectRFQ

VJ0603D1R8BXPAJ

Vishay VitramonIn Stock: 61722VJ0603D1R8BXPAJ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ML03V11R8BAT2A is determined by strict equivalence across the following parameters: capacitance value (1.8 pF), tolerance (±0.1 pF), voltage rating (250V), temperature coefficient (C0G/NP0), operating temperature range (-55°C to 125°C), package format (0603/1608 Metric), and mounting type (Surface Mount MLCC). All identified substitute parts maintain these electrical and mechanical specifications. Moisture sensitivity level MSL 1 is consistent across all alternatives. Dimensional variations within the 0603 package envelope are acceptable for PCB assembly compatibility.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical equivalence to the ML03V11R8BAT2A. Five of the six alternatives carry ROHS3 compliance certification: VJ0603D1R8BXPAJ (Vishay Vitramon), GQM1875C2E1R8BB12D (Murata Electronics), QSCP251Q1R8B1GV001T (Johanson Technology Inc.), and CBR06C189BAGAC (KEMET). The 600S1R8BW250XT from American Technical Ceramics is RoHS non-compliant and REACH-affected, requiring evaluation against specific regulatory requirements for your application.

All parts are in active production status with adequate inventory availability. Selection should be based on supply chain requirements, compliance certifications applicable to your end-use application, and established qualification procedures within your organization.

Frequently Asked Questions (FAQ)

Q: Can these substitute parts be used interchangeably with the ML03V11R8BAT2A?

A: Yes. All listed parts maintain identical capacitance (1.8 pF), tolerance (±0.1 pF), voltage rating (250V), temperature coefficient (C0G/NP0), operating temperature range (-55°C to 125°C), and package format (0603/1608 Metric). Dimensional variations within the 0603 package specification are acceptable for standard PCB assembly processes.

Q: What is the difference between C0G and NP0 temperature coefficients?

A: C0G and NP0 designations refer to the same temperature coefficient characteristic. C0G is the EIA standard designation, while NP0 is the IEC standard designation. Both indicate zero temperature coefficient performance across the specified operating range.

Q: Are there compliance differences between the substitute parts?

A: Five substitute parts (Vishay Vitramon VJ0603D1R8BXPAJ, Murata Electronics GQM1875C2E1R8BB12D, Johanson Technology Inc. QSCP251Q1R8B1GV001T, and KEMET CBR06C189BAGAC) are ROHS3 compliant. The American Technical Ceramics 600S1R8BW250XT is RoHS non-compliant and REACH-affected. Verify compliance requirements for your specific application before selection.

Q: What does MSL 1 (Unlimited) moisture sensitivity mean?

A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. All parts listed carry MSL 1 rating.

Q: Are dimensional differences between substitute parts significant?

A: All parts conform to the 0603 (1608 Metric) package specification. Thickness variations range from 0.74mm to 0.94mm, and length/width dimensions vary within standard tolerances. These variations are within acceptable limits for standard PCB assembly equipment and design layouts.