Equivalent & Substitute Parts for MJD32CQ-13

Part Overview

The MJD32CQ-13 is a PNP bipolar junction transistor manufactured by Diodes Incorporated, rated for 100 V collector-emitter breakdown voltage and 3 A maximum collector current. This surface mount device in TO-252-3 (DPAK) packaging is designed for general-purpose switching and amplification applications requiring moderate power dissipation up to 15 W. The part is active and in production with 30,400 units currently in stock.

Equivalent and substitute parts are necessary when the primary part number becomes unavailable, when alternative packaging formats are required for manufacturing processes, or when sourcing from multiple manufacturers is needed for supply chain resilience. The substitute parts listed maintain electrical compatibility while offering variations in packaging, power ratings, and manufacturer specifications.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Current - Collector (Ic) Max	3	A
Voltage - Collector Emitter Breakdown (Max)	100	V
Vce Saturation (Max) @ Ib, Ic	1.2 V @ 375 mA, 3 A	—
Current - Collector Cutoff (Max)	1	µA
DC Current Gain (hFE) Min @ Ic, Vce	10 @ 3 A, 4 V	—
Power - Max	15	W
Frequency - Transition	3	MHz
Operating Temperature Range	-55 to 150	°C (TJ)
Mounting Type	Surface Mount	—
Package / Case	TO-252-3, DPAK (2 Leads + Tab), SC-63	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of PNP bipolar junction transistors is determined by strict electrical and mechanical compatibility. The following parameters must match or remain within acceptable tolerances for direct substitution:

Critical Matching Parameters:

Transistor polarity (PNP)
Maximum collector current (3 A)
Collector-emitter breakdown voltage (100 V)
Vce saturation characteristics (1.2 V @ 375 mA, 3 A)
DC current gain minimum (10 @ 3 A, 4 V)
Package type (TO-252-3 / DPAK)
Surface mount configuration

Secondary Considerations:

Power dissipation rating (may vary between 1.25 W and 15 W depending on thermal management requirements)
Transition frequency (3 MHz nominal)
Operating temperature range (minimum -55°C to -65°C, maximum 150°C)
Packaging format (Tape & Reel, Cut Tape, or Tube)
Manufacturer source

All substitute parts listed maintain the core electrical specifications required for circuit-level compatibility. Variations in power rating and packaging format reflect different manufacturing sources and distribution methods rather than functional differences in the transistor's switching and amplification characteristics.

Parameter Comparison

Part Number	Manufacturer	Ic (Max)	Vce Breakdown (Max)	Vce Sat @ Ib, Ic	hFE Min @ Ic, Vce	Power (Max)	Freq - Transition	Temp Range	Package	Packaging Format
MJD32CQ-13	Diodes Incorporated	3 A	100 V	1.2 V @ 375 mA, 3 A	10 @ 3 A, 4 V	15 W	3 MHz	-55 to 150°C	TO-252-3	Tape & Reel
MJD32C-13	Diodes Incorporated	3 A	100 V	1.2 V @ 375 mA, 3 A	10 @ 3 A, 4 V	15 W	3 MHz	-55 to 150°C	TO-252-3	Tape & Reel
MJD32C-TP	Micro Commercial Co	3 A	100 V	1.2 V @ 375 mA, 3 A	10 @ 3 A, 4 V	1.25 W	3 MHz	-55 to 150°C	TO-252-3	Tape & Reel
MJD32CT4-A	STMicroelectronics	3 A	100 V	1.2 V @ 375 mA, 3 A	10 @ 3 A, 4 V	15 W	—	-55 to 150°C	TO-252-3	Cut Tape & Digi-Reel
MJD32CT4G	onsemi	3 A	100 V	1.2 V @ 375 mA, 3 A	10 @ 3 A, 4 V	1.56 W	3 MHz	-65 to 150°C	TO-252-3	Cut Tape & Digi-Reel
NJVMJD32CG	onsemi	3 A	100 V	1.2 V @ 375 mA, 3 A	10 @ 3 A, 4 V	1.56 W	3 MHz	-65 to 150°C	TO-252-3	Tube
MJD32CG	onsemi	3 A	100 V	1.2 V @ 375 mA, 3 A	10 @ 3 A, 4 V	1.56 W	3 MHz	-65 to 150°C	TO-252-3	Tube
MJD32CRLG	onsemi	3 A	100 V	1.2 V @ 375 mA, 3 A	10 @ 3 A, 4 V	1.56 W	3 MHz	-65 to 150°C	TO-252-3	Cut Tape & Digi-Reel

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and REACH unaffected status, matching the regulatory requirements of the primary MJD32CQ-13 part. Selection among these equivalents is based on the following engineering criteria:

Parametric Equivalence: MJD32C-13 from Diodes Incorporated is a parametric equivalent offering identical electrical specifications and power rating (15 W) to the primary part. This substitution is appropriate for direct replacement in existing designs without thermal or performance considerations.

Manufacturer Alternatives: MJD32CT4-A (STMicroelectronics) and MJD32CT4G (onsemi) provide equivalent electrical performance with 15 W and 1.56 W power ratings respectively. These parts are suitable for applications where supply chain diversification across multiple manufacturers is required while maintaining circuit compatibility.

Packaging Format Variations: MJD32C-TP (Micro Commercial Co), NJVMJD32CG (onsemi), MJD32CG (onsemi), and MJD32CRLG (onsemi) offer the same electrical specifications in alternative packaging formats (Tape & Reel, Tube, or Cut Tape & Digi-Reel). Selection depends on manufacturing assembly requirements and inventory management practices.

Temperature Range Consideration: Parts from onsemi (MJD32CT4G, NJVMJD32CG, MJD32CG, MJD32CRLG) extend the minimum operating temperature to -65°C compared to -55°C for Diodes Incorporated and Micro Commercial Co variants. This extended range is beneficial for applications requiring operation in extreme cold environments.

Power Dissipation Variations: MJD32C-TP, MJD32CT4G, NJVMJD32CG, MJD32CG, and MJD32CRLG are rated at 1.25 W to 1.56 W maximum power dissipation, compared to 15 W for the primary part and MJD32C-13. These lower power ratings reflect different thermal management assumptions and are suitable for applications with reduced power dissipation requirements or improved thermal coupling to PCB ground planes.

All parts maintain MSL 1 (Unlimited) moisture sensitivity classification, ensuring compatibility with standard storage and handling procedures.

Frequently Asked Questions (FAQ)

Q: Can MJD32C-13 be used as a direct replacement for MJD32CQ-13?

A: Yes. MJD32C-13 is a parametric equivalent manufactured by Diodes Incorporated with identical electrical specifications, power rating (15 W), and operating temperature range (-55°C to 150°C). Both parts are in TO-252-3 packaging and available in Tape & Reel format. This substitution requires no circuit modifications.

Q: What is the difference between the onsemi variants (MJD32CT4G, NJVMJD32CG, MJD32CG, MJD32CRLG)?

A: These onsemi parts share identical electrical specifications and power ratings (1.56 W) but differ in packaging format. MJD32CT4G and MJD32CRLG are supplied in Cut Tape & Digi-Reel format, while NJVMJD32CG and MJD32CG are supplied in Tube format. The choice depends on manufacturing assembly equipment compatibility and inventory management requirements. All four parts extend the minimum operating temperature to -65°C.

Q: Why do some substitute parts have lower power ratings (1.25 W to 1.56 W) compared to the primary part (15 W)?

A: Power dissipation ratings reflect thermal management assumptions and package thermal resistance characteristics. Lower power ratings do not indicate reduced electrical capability; rather, they represent conservative thermal design margins. These parts are suitable for applications where actual power dissipation remains within their rated limits. For applications requiring sustained 15 W dissipation, select MJD32C-13 or MJD32CT4-A.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 compliant and REACH unaffected, matching the regulatory status of MJD32CQ-13. All parts carry MSL 1 (Unlimited) moisture sensitivity classification.

Q: Can MJD32C-TP from Micro Commercial Co be used in high-temperature applications?

A: MJD32C-TP operates across the same temperature range as MJD32CQ-13 (-55°C to 150°C). However, its 1.25 W power rating is lower than the primary part. For applications requiring both extended temperature range and higher power dissipation, select onsemi variants (MJD32CT4G, NJVMJD32CG, MJD32CG, MJD32CRLG) which extend minimum temperature to -65°C while maintaining 1.56 W power rating.

Q: What packaging formats are available among the substitute parts?

A: Substitute parts are available in three packaging formats: Tape & Reel (MJD32CQ-13, MJD32C-13, MJD32C-TP), Cut Tape & Digi-Reel (MJD32CT4-A, MJD32CT4G, MJD32CRLG), and Tube (NJVMJD32CG, MJD32CG). Selection depends on manufacturing process requirements and automated assembly equipment specifications.

Q: Are there any electrical performance differences between MJD32CQ-13 and its substitutes?

A: All substitute parts maintain identical core electrical specifications: 3 A maximum collector current, 100 V collector-emitter breakdown voltage, 1.2 V Vce saturation at specified conditions, and 10 minimum DC current gain. Transition frequency is 3 MHz for all parts except MJD32CT4-A, which does not specify this parameter. These electrical characteristics ensure circuit-level compatibility across all listed parts.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message