MJD127-TP Equivalent & Substitute Parts

Part Overview

The MJD127-TP is an active production PNP bipolar junction transistor manufactured by Micro Commercial Co, rated for 100 V collector-emitter breakdown voltage and 8 A maximum collector current in a surface mount DPAK package. This component is designed for general-purpose switching and amplification applications requiring moderate power dissipation up to 1.5 W. Substitute parts are identified to address inventory availability, packaging format requirements, or specific performance characteristics while maintaining electrical and mechanical compatibility within defined parameter ranges.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Current - Collector (Ic) (Max)	8	A
Voltage - Collector Emitter Breakdown (Max)	100	V
Vce Saturation (Max) @ Ib, Ic	4V @ 80mA, 8A	—
Power - Max	1.5	W
DC Current Gain (hFE) (Min) @ Ic, Vce	1000 @ 4A, 4V	—
Operating Temperature (TJ)	150	°C
Package / Case	TO-252-3, DPAK (2 Leads + Tab), SC-63	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitute parts for the MJD127-TP are grouped based on strict electrical and mechanical compatibility criteria. All substitute parts maintain the following critical parameters:

Mandatory Compatibility Parameters:

Transistor polarity: PNP
Collector-emitter breakdown voltage: 100 V
Package type: TO-252-3 DPAK (2 Leads + Tab), SC-63
Mounting type: Surface Mount
RoHS3 compliance
MSL rating: 1 (Unlimited)

Substitution Categories:

Category 1: Direct Electrical Equivalents The MJD127T4G (onsemi) maintains identical maximum collector current (8 A), identical saturation voltage specification (4V @ 80mA, 8A), and identical DC current gain minimum (1000 @ 4A, 4V). This part is a PNP Darlington variant with enhanced frequency response (4 MHz transition frequency) and slightly higher maximum power rating (1.75 W). Packaging differs only in format (Cut Tape & Digi-Reel® versus Tape & Reel).

Category 2: Reduced Current Rating Substitutes The MJD42CRLG, MJD42CT4G, and MJD42CG (all onsemi) are rated for 6 A maximum collector current, representing a 25% reduction from the MJD127-TP specification. These parts maintain the 100 V breakdown voltage and DPAK package but feature different saturation voltage characteristics (1.5V @ 600mA, 6A) and lower DC current gain (15 @ 3A, 4V). These substitutes are applicable only in applications where the 8 A rating is not required.

Parameter Comparison

Parameter	MJD127-TP (Main)	MJD127T4G	MJD42CRLG	MJD42CT4G	MJD42CG
Manufacturer	Micro Commercial Co	onsemi	onsemi	onsemi	onsemi
Transistor Type	PNP	PNP - Darlington	PNP	PNP	PNP
Current - Collector (Ic) (Max)	8 A	8 A	6 A	6 A	6 A
Voltage - Collector Emitter Breakdown (Max)	100 V	100 V	100 V	100 V	100 V
Vce Saturation (Max) @ Ib, Ic	4V @ 80mA, 8A	4V @ 80mA, 8A	1.5V @ 600mA, 6A	1.5V @ 600mA, 6A	1.5V @ 600mA, 6A
Current - Collector Cutoff (Max)	10nA	10µA	50µA	50µA	50µA
DC Current Gain (hFE) (Min) @ Ic, Vce	1000 @ 4A, 4V	1000 @ 4A, 4V	15 @ 3A, 4V	15 @ 3A, 4V	15 @ 3A, 4V
Power - Max	1.5 W	1.75 W	1.75 W	1.75 W	1.75 W
Frequency - Transition	—	4 MHz	3 MHz	3 MHz	3 MHz
Operating Temperature (TJ)	150°C	-65°C ~ 150°C	-65°C ~ 150°C	-65°C ~ 150°C	-65°C ~ 150°C
Package / Case	TO-252-3, DPAK	TO-252-3, DPAK	TO-252-3, DPAK	TO-252-3, DPAK	TO-252-3, DPAK
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

MJD127T4G Selection Criteria: The MJD127T4G is the primary direct substitute for the MJD127-TP. Both parts maintain identical maximum collector current (8 A) and saturation voltage specifications (4V @ 80mA, 8A), ensuring functional equivalence in applications requiring full 8 A capability. The MJD127T4G is manufactured by onsemi, an active production supplier with ROHS3 compliance and unlimited moisture sensitivity rating. The Darlington configuration provides enhanced current gain characteristics. Packaging availability in Cut Tape & Digi-Reel® format offers alternative procurement options to the Tape & Reel format of the main part. Operating temperature range extends to -65°C, providing broader environmental coverage than the MJD127-TP specification.

MJD42 Series Selection Criteria: The MJD42CRLG, MJD42CT4G, and MJD42CG are applicable only in applications where collector current requirements do not exceed 6 A. These parts are not suitable for designs requiring the full 8 A rating of the MJD127-TP. All three MJD42 variants maintain 100 V breakdown voltage and DPAK packaging. Selection among these three should be based on packaging format availability: MJD42CRLG (Tape & Reel), MJD42CT4G (Cut Tape & Digi-Reel®), or MJD42CG (Tube). All MJD42 variants are active production parts with ROHS3 compliance and unlimited MSL rating.

Frequently Asked Questions (FAQ)

Q: Can the MJD127T4G replace the MJD127-TP in all applications?

A: The MJD127T4G maintains identical maximum collector current (8 A) and saturation voltage specifications (4V @ 80mA, 8A), making it electrically equivalent for applications requiring full 8 A operation. Both parts are housed in TO-252-3 DPAK packages with identical pinout. The primary difference is the Darlington configuration of the MJD127T4G, which provides higher current gain. Packaging format differs (Cut Tape & Digi-Reel® versus Tape & Reel), but this affects procurement and handling only, not electrical performance.

Q: Why are the MJD42 series parts listed as substitutes if they have lower current ratings?

A: The MJD42 series parts (MJD42CRLG, MJD42CT4G, MJD42CG) are listed as substitutes for applications where the 8 A maximum collector current of the MJD127-TP is not required. These parts maintain the 100 V breakdown voltage and DPAK package compatibility. They are applicable only in designs with collector current requirements of 6 A or less. Applications requiring the full 8 A rating must use the MJD127-TP or MJD127T4G.

Q: What is the difference between the three MJD42 variants?

A: The MJD42CRLG, MJD42CT4G, and MJD42CG are electrically identical PNP transistors with 6 A maximum collector current and 100 V breakdown voltage. The differences are packaging formats only: MJD42CRLG is supplied in Tape & Reel format, MJD42CT4G in Cut Tape & Digi-Reel® format, and MJD42CG in Tube format. Selection should be based on assembly equipment compatibility and procurement requirements.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The MJD127T4G, MJD42CRLG, MJD42CT4G, and MJD42CG are all ROHS3 compliant, matching the compliance status of the MJD127-TP. All parts carry unlimited moisture sensitivity level (MSL 1) ratings.

Q: What is the significance of the Darlington configuration in the MJD127T4G?

A: The MJD127T4G is a PNP Darlington transistor, which is an internal configuration combining two transistor stages. This configuration provides higher current gain (1000 @ 4A, 4V) compared to standard PNP transistors. The Darlington structure results in a 4 MHz transition frequency specification. For applications sensitive to switching speed or base drive requirements, the Darlington characteristics of the MJD127T4G must be evaluated against the standard PNP configuration of the MJD127-TP.

Q: Can I use MJD42 parts in a design originally specified for MJD127-TP?

A: MJD42 parts can be used only if the application circuit does not require collector currents exceeding 6 A. The 25% reduction in maximum collector current rating represents a fundamental electrical limitation. If the design operates at or near the 8 A specification of the MJD127-TP, MJD42 substitution is not appropriate. The MJD127T4G is the correct substitute for full 8 A capability.

Q: What is the operating temperature range difference?

A: The MJD127-TP specifies a maximum junction temperature (TJ) of 150°C without a minimum specification. The MJD127T4G and all MJD42 variants specify an operating temperature range of -65°C to 150°C. For applications requiring operation below ambient temperature or in cold environments, the extended lower temperature specification of the substitute parts provides additional design margin.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message