MIN02-002C7R5D-F Equivalent & Substitute Parts

Part Overview

The MIN02-002C7R5D-F is a 7.5 pF Polytetrafluoroethylene (PTFE) capacitor rated for 300 V operation in a nonstandard surface mount package. This component is designed for RF and high-frequency applications requiring stable capacitance across an extended temperature range of -55°C to 200°C. The part is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives that maintain electrical and mechanical compatibility within the specified parameter constraints.

Substiute Parts

MIN02-002C7R5D-F

Cornell Dubilier Electronics (CDE)In Stock: 759MIN02-002C7R5D-F Datasheet

Current PartRFQ

MIN02-002CC7R5D-F

Cornell Dubilier Electronics (CDE)In Stock: 1011MIN02-002CC7R5D-F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MIN02-002C7R5D-F must satisfy the following electrical and mechanical criteria:

Electrical Compatibility Requirements:

• Capacitance value: 7.5 pF
• Capacitance tolerance: ±0.5 pF
• Voltage rating: 300 V minimum
• Operating temperature range: -55°C to 200°C minimum
• RF and high-frequency application suitability

Mechanical Compatibility Requirements:

• Mounting type: Surface Mount
• Package type: Nonstandard SMD
• Physical dimensions: 0.218" L × 0.400" W (5.54 mm × 10.16 mm)
• Moisture Sensitivity Level: 1 (Unlimited)

Regulatory Compliance Requirements:

• RoHS3 Compliant
• REACH Unaffected status

The substitute part identified below meets all specified parameters while offering improved product availability status.

Parameter Comparison

Engineering Selection Recommendations

The MIN02-002CC7R5D-F serves as a direct functional substitute for the MIN02-002C7R5D-F based on the following engineering criteria:

Electrical Equivalence: Both components maintain identical capacitance (7.5 pF), tolerance (±0.5 pF), voltage rating (300 V), and operating temperature range (-55°C to 200°C). The RF and high-frequency application designation is preserved across both parts.

Mechanical Compatibility: Physical dimensions, mounting type, and package configuration are identical, ensuring direct board-level substitution without layout modifications.

Regulatory Compliance: Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying environmental and regulatory requirements.

Product Availability: The substitute part maintains active product status with higher inventory availability (979 Pcs versus 690 Pcs), providing improved supply chain reliability compared to the discontinued original part.

Dielectric Material Difference: The substitute employs Mica dielectric material in place of PTFE. Both dielectric materials are established for RF and high-frequency applications and satisfy the specified electrical parameters. The selection between PTFE and Mica dielectrics depends on application-specific requirements not provided in the parameter set.

Frequently Asked Questions (FAQ)

Q: Can MIN02-002CC7R5D-F replace MIN02-002C7R5D-F in existing designs?

A: Yes. Both components share identical electrical specifications (7.5 pF capacitance, ±0.5 pF tolerance, 300 V rating, -55°C to 200°C operating range) and mechanical dimensions (0.218" L × 0.400" W). Direct substitution is supported at the board level without layout changes.

Q: What is the difference between PTFE and Mica dielectric materials in these capacitors?

A: PTFE and Mica are both established dielectric materials for RF and high-frequency applications. The original part uses PTFE dielectric, while the substitute uses Mica dielectric. Both materials meet the specified electrical parameters. Application-specific performance characteristics depend on circuit requirements not included in the provided parameter set.

Q: Are both parts RoHS compliant?

A: Yes. Both MIN02-002C7R5D-F and MIN02-002CC7R5D-F are ROHS3 compliant and REACH unaffected, satisfying environmental regulatory requirements.

Q: What is the Moisture Sensitivity Level (MSL) for these components?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Why is the original part discontinued?

A: The MIN02-002C7R5D-F is discontinued at DiGi Electronics. The MIN02-002CC7R5D-F maintains active product status with equivalent electrical and mechanical specifications.

Q: Are the physical dimensions identical?

A: Yes. Both components measure 0.218" L × 0.400" W (5.54 mm × 10.16 mm) in nonstandard SMD package configuration, ensuring identical footprint compatibility.