MIN02-002C6R2D-F Equivalent & Substitute Parts

Part Overview

The MIN02-002C6R2D-F is a 6.2 pF Polytetrafluoroethylene (PTFE) capacitor rated for 300 V operation in a nonstandard surface mount package. This component is designed for RF and high-frequency applications requiring stable capacitance across an extended temperature range of -55°C to 200°C. The part is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives that maintain electrical and mechanical compatibility within the same product series.

Substiute Parts

MIN02-002C6R2D-F

Cornell Dubilier Electronics (CDE)In Stock: 822MIN02-002C6R2D-F Datasheet

Current PartRFQ

MIN02-002CC6R2D-F

Cornell Dubilier Electronics (CDE)In Stock: 1034MIN02-002CC6R2D-F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MIN02-002C6R2D-F is determined by strict adherence to the following electrical and mechanical parameters:

Critical Matching Parameters:

• Capacitance value: 6.2 pF
• Tolerance specification: ±0.5 pF
• Voltage rating: 300 V minimum
• Mounting type: Surface Mount
• Package dimensions: 0.218" L x 0.400" W (5.54 mm x 10.16 mm)
• Operating temperature range: -55°C to 200°C
• Series designation: MIN
• Application suitability: RF and high-frequency circuits

The substitute part MIN02-002CC6R2D-F meets all electrical specifications and physical dimensions while maintaining compatibility with the original circuit design requirements. The dielectric material differs (Mica versus PTFE), but both materials satisfy the specified electrical parameters and operating conditions for this application category.

Parameter Comparison

Engineering Selection Recommendations

The MIN02-002CC6R2D-F serves as a direct functional equivalent to the discontinued MIN02-002C6R2D-F. Both components are manufactured by Cornell Dubilier Electronics within the MIN series and satisfy identical electrical specifications: 6.2 pF capacitance with ±0.5 pF tolerance, 300 V voltage rating, and -55°C to 200°C operating temperature range.

The substitute part maintains full compatibility with the original nonstandard SMD package footprint (0.218" L x 0.400" W / 5.54 mm x 10.16 mm) and supports RF and high-frequency circuit applications. Both parts achieve ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity classification, ensuring equivalent environmental and regulatory compliance.

The MIN02-002CC6R2D-F is currently in active production status with higher inventory availability (959 Pcs versus 746 Pcs), providing improved supply chain reliability for new designs and production requirements.

Frequently Asked Questions (FAQ)

Q: Can the MIN02-002CC6R2D-F replace the MIN02-002C6R2D-F in existing circuit designs?

A: Yes. Both components share identical electrical specifications (6.2 pF ±0.5 pF at 300 V), operating temperature range (-55°C to 200°C), and physical package dimensions (0.218" L x 0.400" W). The nonstandard SMD footprint is identical, enabling direct PCB layout compatibility.

Q: What is the difference between the PTFE and Mica dielectric materials in these parts?

A: The original MIN02-002C6R2D-F uses PTFE dielectric, while the substitute MIN02-002CC6R2D-F uses Mica dielectric. Both materials meet the specified electrical parameters for this application. The selection between these materials depends on specific circuit requirements not defined in the provided specifications.

Q: Are both parts RoHS compliant?

A: Yes. Both the MIN02-002C6R2D-F and MIN02-002CC6R2D-F are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards.

Q: What is the moisture sensitivity level for these capacitors?

A: Both parts are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage, handling, or assembly processes.

Q: Why is the original part discontinued?

A: The MIN02-002C6R2D-F is discontinued at DiGi Electronics. The MIN02-002CC6R2D-F remains in active production status, providing continued availability for equivalent circuit functionality.

Q: Are the physical dimensions identical between both parts?

A: Yes. Both components share identical nonstandard SMD package dimensions of 0.218" L x 0.400" W (5.54 mm x 10.16 mm), ensuring direct mechanical compatibility on existing PCB designs.