MIN02-002C4R7D-F Equivalent & Substitute Parts

Part Overview

The MIN02-002C4R7D-F is a 4.7 pF Polytetrafluoroethylene (PTFE) capacitor rated for 300 V operation in a nonstandard surface mount package. This component is designed for RF and high-frequency applications requiring stable capacitance across an extended temperature range of -55°C to 200°C. The part is currently classified as obsolete, necessitating identification of functionally equivalent alternatives to maintain design continuity and ensure component availability for production and repair applications.

Substiute Parts

MIN02-002C4R7D-F

Cornell Dubilier Electronics (CDE)In Stock: 757MIN02-002C4R7D-F Datasheet

Current PartRFQ

MIN02-002CC4R7D-F

Cornell Dubilier Electronics (CDE)In Stock: 1201MIN02-002CC4R7D-F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MIN02-002C4R7D-F is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance value: 4.7 pF (exact match required)
• Tolerance: ±0.5 pF (exact match required)
• Voltage rating: 300 V (minimum requirement)
• Operating temperature range: -55°C to 200°C (full range coverage required)

Mechanical Parameters:

• Mounting type: Surface Mount (required for PCB compatibility)
• Package dimensions: 0.218" L x 0.400" W / 5.54 mm x 10.16 mm (exact match required)
• Package classification: Nonstandard SMD (required for footprint compatibility)

Compliance & Environmental Parameters:

• RoHS3 compliance (required for regulatory alignment)
• Moisture Sensitivity Level 1 (required for handling and storage compatibility)

The substitute part MIN02-002CC4R7D-F meets all these criteria. The primary difference is the dielectric material (Mica instead of PTFE) and packaging format (Tape & Reel instead of bulk), with the substitute part maintaining active product status.

Parameter Comparison

Engineering Selection Recommendations

The MIN02-002CC4R7D-F is the direct equivalent substitute for the obsolete MIN02-002C4R7D-F. Both components are manufactured by Cornell Dubilier Electronics within the MIN series and satisfy all critical electrical, mechanical, and compliance requirements.

Selection Basis:

The substitute part maintains identical electrical specifications (4.7 pF capacitance, ±0.5 pF tolerance, 300 V rating) and mechanical compatibility (nonstandard SMD package, 5.54 mm x 10.16 mm dimensions, surface mount configuration). Both components operate across the full -55°C to 200°C temperature range and carry ROHS3 compliance certification with MSL 1 rating.

The primary distinction is the dielectric material composition (Mica versus PTFE) and product lifecycle status. The substitute part is currently in active production status, ensuring long-term availability and supply chain continuity. The Tape & Reel packaging format of the substitute part aligns with standard manufacturing and assembly processes.

Both components are suitable for RF and high-frequency circuit applications. The selection between PTFE and Mica dielectric materials is determined by specific circuit performance requirements not specified in the provided parameters.

Frequently Asked Questions (FAQ)

Q: Can MIN02-002CC4R7D-F be used as a direct replacement for MIN02-002C4R7D-F?

A: Yes. Both components share identical electrical ratings (4.7 pF, ±0.5 pF, 300 V), operating temperature range (-55°C to 200°C), physical dimensions (5.54 mm x 10.16 mm), and mounting configuration (nonstandard SMD surface mount). Both are ROHS3 compliant with MSL 1 rating.

Q: What is the difference between the PTFE and Mica dielectric materials?

A: The main part uses Polytetrafluoroethylene (PTFE) dielectric, while the substitute uses Mica dielectric. Both materials support the specified electrical and thermal performance parameters. The selection between these materials depends on circuit-specific performance requirements such as frequency response, temperature coefficient, and dissipation factor.

Q: Are the physical packages identical?

A: Yes. Both components use a nonstandard SMD package with identical dimensions of 0.218" L x 0.400" W (5.54 mm x 10.16 mm). PCB footprints and mounting procedures are compatible.

Q: What is the difference in packaging format?

A: The main part is supplied in bulk format, while the substitute part is supplied in Tape & Reel (TR) format. Tape & Reel packaging is standard for automated assembly processes and does not affect component electrical or mechanical performance.

Q: Why is the main part classified as obsolete?

A: The MIN02-002C4R7D-F is listed as obsolete, indicating discontinued production. The MIN02-002CC4R7D-F maintains active product status and is the recommended alternative for new designs and ongoing production requirements.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both components are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and use.

Q: What is the significance of MSL 1 rating?

A: Moisture Sensitivity Level 1 indicates unlimited shelf life and no special moisture control requirements during storage, handling, or assembly. Both components carry this rating.