Equivalent & Substitute Parts for MIN02-002C040D-F

Part Overview

The MIN02-002C040D-F is a 4 pF Polytetrafluoroethylene (PTFE) capacitor rated for 300 V operation in a nonstandard surface mount package. This component is designed for RF and high-frequency applications requiring stable dielectric properties across an extended temperature range of -55°C to 200°C. The part is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives that maintain electrical and mechanical compatibility within the same product series.

Substiute Parts

MIN02-002C040D-F

Cornell Dubilier Electronics (CDE)In Stock: 973MIN02-002C040D-F Datasheet

Current PartRFQ

MIN02-002CC040D-F

Cornell Dubilier Electronics (CDE)In Stock: 843MIN02-002CC040D-F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MIN02-002C040D-F is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Capacitance value of 4 pF (exact match)
• Tolerance of ±0.5 pF (exact match)
• Voltage rating of 300 V (minimum requirement)
• RF and high-frequency performance capability

Mechanical Equivalence Requirements:

• Surface mount mounting type
• Nonstandard SMD package configuration
• Physical dimensions of 0.218" L x 0.400" W (5.54mm x 10.16mm)

Environmental and Compliance Equivalence Requirements:

• Operating temperature range of -55°C to 200°C
• ROHS3 compliance
• Moisture Sensitivity Level 1 (Unlimited)

The substitute part MIN02-002CC040D-F meets all these criteria while differing only in dielectric material composition (Mica instead of PTFE). This material difference does not affect the electrical performance parameters or mechanical compatibility for this application category.

Parameter Comparison

Engineering Selection Recommendations

The MIN02-002CC040D-F serves as a direct functional equivalent to the discontinued MIN02-002C040D-F based on the following engineering criteria:

Electrical Performance: Both parts maintain identical capacitance (4 pF), tolerance (±0.5 pF), and voltage rating (300 V). The dielectric material difference (Mica versus PTFE) does not alter the specified electrical parameters for this application.

Physical Compatibility: Both parts share identical mounting type (surface mount), package configuration (nonstandard SMD), and physical dimensions (0.218" L x 0.400" W). Direct PCB footprint compatibility is assured.

Environmental Performance: Both parts operate across the full temperature range of -55°C to 200°C and maintain identical moisture sensitivity classification (MSL 1, Unlimited).

Regulatory Compliance: Both parts are ROHS3 compliant and carry identical REACH and ECCN classifications, ensuring regulatory equivalence.

Availability: The substitute part MIN02-002CC040D-F is currently active in inventory (783 pcs), providing immediate availability compared to the discontinued status of the original part.

Frequently Asked Questions (FAQ)

Q: Can MIN02-002CC040D-F be used as a direct replacement for MIN02-002C040D-F in existing designs?

A: Yes. Both parts are electrically and mechanically equivalent across all specified parameters. The capacitance, tolerance, voltage rating, operating temperature range, and physical dimensions are identical. Direct substitution is supported without design modification.

Q: What is the difference between the PTFE dielectric in the original part and the Mica dielectric in the substitute?

A: The dielectric material differs, but both materials deliver the specified electrical performance for this 4 pF, 300 V application. Both materials support RF and high-frequency operation within the stated temperature range. The material difference does not affect the electrical parameters provided in the specifications.

Q: Are the physical dimensions identical between both parts?

A: Yes. Both parts measure 0.218" L x 0.400" W (5.54mm x 10.16mm) in the nonstandard SMD package configuration. PCB footprints and assembly processes remain unchanged.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry identical ECCN (EAR99) and HTSUS classifications. Regulatory equivalence is complete.

Q: What is the current availability status of each part?

A: The original MIN02-002C040D-F is discontinued at DiGi Electronics. The substitute MIN02-002CC040D-F is active with 783 pcs in stock, providing immediate availability for new orders and replacements.

Q: Are the tolerance specifications identical?

A: Yes. Both parts carry a tolerance of ±0.5 pF, ensuring equivalent capacitance accuracy and circuit performance.