MIC61300YMME-TR Equivalent & Substitute Parts

Part Overview

The MIC61300YMME-TR is a linear voltage regulator IC from Microchip Technology designed for positive adjustable output applications. This Surface Mount device delivers 3A output current with a 10-MSOP-EP package configuration and is classified as Active product status. The part is supplied in Tape & Reel packaging format.

Alternative part sourcing becomes necessary due to inventory availability, regional supply chain variations, or packaging format requirements while maintaining identical electrical and mechanical specifications.

Key Parameters

Parameter	Specification
Manufacturer	Microchip Technology
Category	Power Management (PMIC)
Output Configuration	Positive
Output Type	Adjustable
Number of Regulators	1
Voltage - Input (Max)	3.6V
Voltage - Output (Min/Fixed)	0.5V
Voltage - Output (Max)	3V
Voltage Dropout (Max)	0.35V @ 3A
Current - Output	3A
Control Features	Enable
Protection Features	Over Current, Over Temperature
Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package	10-MSOP-EP
Product Status	Active
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	3 (168 Hours)
REACH Status	REACH Unaffected

Substitute Part Grouping Explanation

Substitution eligibility for the MIC61300YMME-TR is determined by strict equivalence across the following critical parameters:

Electrical specifications: Positive output configuration, adjustable output type, 3A output current, 0.5V minimum output voltage, 3V maximum output voltage, 0.35V maximum dropout voltage at 3A, and -40°C to 85°C operating temperature range.

Mechanical specifications: Surface Mount mounting type, 10-MSOP-EP package with exposed pad, and 0.118" (3.00mm) width.

Regulatory compliance: ROHS3 compliance, REACH Unaffected status, and MSL 3 rating.

Functional features: Enable control feature and Over Current/Over Temperature protection.

The substitute part MIC61300YMME shares identical electrical, mechanical, and regulatory specifications with the main part. The only difference is packaging format: Tube versus Tape & Reel.

Parameter Comparison

Parameter	MIC61300YMME-TR (Main)	MIC61300YMME (Substitute)
Manufacturer	Microchip Technology	Microchip Technology
Base Product Number	MIC61300	MIC61300
Output Configuration	Positive	Positive
Output Type	Adjustable	Adjustable
Voltage - Input (Max)	3.6V	3.6V
Voltage - Output (Min/Fixed)	0.5V	0.5V
Voltage - Output (Max)	3V	3V
Voltage Dropout (Max)	0.35V @ 3A	0.35V @ 3A
Current - Output	3A	3A
Control Features	Enable	Enable
Protection Features	Over Current, Over Temperature	Over Current, Over Temperature
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C
Mounting Type	Surface Mount	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad	10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package	10-MSOP-EP	10-MSOP-EP
Product Status	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	3 (168 Hours)	3 (168 Hours)
REACH Status	REACH Unaffected	REACH Unaffected
Packaging Format	Tape & Reel (TR)	Tube

Engineering Selection Recommendations

Both the MIC61300YMME-TR and MIC61300YMME are Active status products from Microchip Technology with full ROHS3 compliance and REACH Unaffected designation. Selection between these parts depends on packaging format requirements and inventory availability.

The MIC61300YMME-TR in Tape & Reel format is suitable for automated assembly processes and high-volume production environments. The MIC61300YMME in Tube packaging is appropriate for manual assembly, lower-volume applications, or situations where Tape & Reel format is unavailable.

Both parts maintain identical electrical performance, thermal characteristics, and regulatory compliance status. No functional or reliability differences exist between the two variants.

Frequently Asked Questions (FAQ)

Q: Can MIC61300YMME (Tube) be used as a direct replacement for MIC61300YMME-TR (Tape & Reel)?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format. Substitution is valid provided your assembly process can accommodate Tube packaging instead of Tape & Reel.

Q: Are there any electrical performance differences between these two part numbers?

A: No. Both parts deliver identical output current (3A), voltage specifications (0.5V to 3V adjustable), dropout voltage (0.35V @ 3A), and operating temperature range (-40°C to 85°C).

Q: Do both parts have the same package dimensions and pin configuration?

A: Yes. Both use the 10-MSOP-EP package with 0.118" (3.00mm) width and exposed pad. Pin configuration and PCB footprint are identical.

Q: Are regulatory certifications the same for both parts?

A: Yes. Both parts are ROHS3 compliant, REACH Unaffected, and carry MSL 3 rating (168 Hours).

Q: Which part should I select for high-volume production?

A: The MIC61300YMME-TR (Tape & Reel) is optimized for automated pick-and-place assembly in high-volume manufacturing. The MIC61300YMME (Tube) is suitable for lower-volume or manual assembly scenarios.

Q: Is there an inventory advantage to choosing one variant over the other?

A: Inventory availability varies by supplier and region. The MIC61300YMME currently shows 2204 pieces in stock, while MIC61300YMME-TR shows 953 pieces. Verify current availability with your component supplier.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message