MIC61300-10YMME-TR Linear Voltage Regulator Equivalent & Substitute Parts

Part Overview

The MIC61300-10YMME-TR is an active linear voltage regulator IC from Microchip Technology, classified as a Power Management (PMIC) component. This device delivers a fixed 1V output at 3A maximum current with integrated over-current and over-temperature protection. The part is supplied in Tape & Reel (TR) packaging and maintains Active product status with full RoHS3 compliance. Substitute parts are identified when packaging format differs while all critical electrical and mechanical parameters remain identical, enabling procurement flexibility across supply channels.

Substiute Parts

MIC61300-10YMME-TR

Microchip TechnologyIn Stock: 1111MIC61300-10YMME-TR Datasheet

Current PartRFQ

MIC61300-10YMME

Microchip TechnologyIn Stock: 1248MIC61300-10YMME Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MIC61300-10YMME-TR is determined by strict equivalence across the following critical parameters:

• Output voltage specification (1V fixed)
• Maximum output current (3A)
• Input voltage range (3.6V maximum)
• Dropout voltage performance (0.35V @ 3A)
• Protection feature set (over-current and over-temperature)
• Operating temperature range (-40°C ~ 85°C)
• Package type (10-MSOP with exposed pad)
• Mounting configuration (surface mount)
• Regulatory compliance (RoHS3, REACH Unaffected)

The MIC61300-10YMME-TR and MIC61300-10YMME differ only in packaging format: Tape & Reel (TR) versus Tube. Both parts share identical electrical specifications, mechanical dimensions, and regulatory certifications. This packaging distinction permits substitution based on supply availability and procurement requirements without affecting circuit performance or reliability.

Parameter Comparison

Engineering Selection Recommendations

Both the MIC61300-10YMME-TR and MIC61300-10YMME maintain Active product status with identical electrical performance specifications and full regulatory compliance. Selection between these parts is determined by packaging and supply chain requirements:

• Tape & Reel (TR) format is standard for automated assembly operations and high-volume production environments
• Tube packaging accommodates manual assembly, lower-volume applications, and alternative procurement channels
• Both formats deliver equivalent component reliability and performance within specified operating parameters
• Regulatory certifications (RoHS3 Compliant, REACH Unaffected) are maintained across both packaging options

Frequently Asked Questions (FAQ)

Q: Can MIC61300-10YMME (Tube) be used as a direct replacement for MIC61300-10YMME-TR (Tape & Reel)?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format only. Substitution is valid provided assembly equipment can accommodate Tube packaging or manual placement is acceptable.

Q: Are there any performance differences between the Tape & Reel and Tube versions?

A: No. Electrical specifications, output voltage, current rating, dropout voltage, protection features, and operating temperature range are identical. Packaging format does not affect circuit performance.

Q: What is the significance of the 10-MSOP package with exposed pad?

A: The exposed pad provides enhanced thermal dissipation for the 3A output current rating. This mechanical feature is identical across both packaging formats.

Q: Are both parts RoHS3 compliant?

A: Yes. Both MIC61300-10YMME-TR and MIC61300-10YMME carry ROHS3 Compliant certification and are REACH Unaffected.

Q: What is the Moisture Sensitivity Level (MSL) for these parts?

A: Both parts are rated MSL 3 with a 168-hour floor life. Standard moisture control procedures apply during storage and handling.

Q: Can these parts be used interchangeably in production?

A: Yes, provided your assembly process can accommodate the specific packaging format. Electrical and mechanical compatibility is complete.